Laptop won't charge or start-up.

Similar Questions

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Acer aspire laptop won't charge

  Haven't tried another adapter, but no charging light and battery flat. Checked voltage on adapters, said 19 V,

  did. Has decided it is the port of loading itself, battery is old only 18 MB. It took to dealer to fix it thanks for the reply

• HP Pavilion about 2 to 3 years: on the computer card reader HP laptop won't charge photos from Windows download 10 - please help!

  Hello I would appreciate help!

  Since download Windows 10 card on the side of the computer reader will download any pictures.

  Rose from 8.1 to Windows 10 Windows.  Card gives Reader 2 Bell Rings when the card is inserted and 2 Bell Rings when removed and not pictures.    It worked fine on 8.1.

  This is an old HP Pavilion about 2 to 3 years.  Not sure if 32 or 64 bits.

  That would really grateful for the help. Thank you.

  Hello:

  See if the W10 Realtek card reader driver from the link below solves the problem.

  You want the first driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• HP Jet 11: Computer flow 11 Hp laptop will not charge

  In two or three weeks, I noticed my flow specifications 11 HP does not load when it is plugged in - it always says "plugged not supported."

  Other threads that I've read it seems that this could be something to do with the installation of Windows 10 (which failed, incidentally, that he was apparently not enough space, even if the laptop is almost nine!).

  There was also a problem with the closure, which seems to have rectified earlier today; the power light remained on the same where I had been through the complete shutdown procedure. I have restored factory settings and this seems to have solved this problem but still the laptop won't charge, and even now I'm not convinced that it does not lose battery when it is off.

  I did a battery check with HP Support Assistant, and who says the battery is 'OK' - it loads also for a few seconds when the control runs, which makes things more frustrating. I'm getting now worried because the battery is now down to 21%

  I don't am not very focused on technique, then, what do I do? The laptop is still under warranty for even a few weeks.

  (As the current state of things I feel very indisposed to bother with products HP or Microsoft, in the future, if I thought that HP were great).

  I would be really grateful for any help at all.

  Thanks in advance.

  Hello @beanbarrel87,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the battery issue and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, try to review the following document and let me know how it goes:

  HP laptops - battery not power Notebook or hold a Charge

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• My laptop is plugged in, but the battery won't charge

  Hello

  In the last two months, capability of my laptop to charge its battery has degraded.
  She went to a battery completely (100%), not being able to load beyond 98% and then 66% and 30%, and now finally, it says "0% availability (plugged in, charge)", but it never increases support.

  Thus, the laptop works when plugged into the charger, but does not illuminate when it is attached only on the battery.

  I rebooted the computer several times - first to stop the machine, then unplug it, remove the battery, press and hold the Start button for a minute, then put the battery back, plug the charger in and rebooting the machine.

  I installed updates for "Stacks" (IE. Microsoft AC adapter, compatible ACPI Microsoft control method battery and battery Composite Microsoft) in Device Manager.
  I also uninstalled the Microsoft ACPI complaint method stack and shutdown and restarted the laptop several times.

  Earlier I called Toshiba support and update the BIOS of 1.50 to 1.70, then restarted the computer, but yet again, the battery won't charge.

  I bought a new battery, which showed that it was fully charged when when I have attached to my laptop, but when exhausted 0% load, I got the same message as for the other battery: "0% availability (plugged in, load).

  I am really puzzled. If not, how can I try to increase the capacity of my laptop battery?

  In my opinion, old battery was certainly defective.
  Is your new original battery, Toshiba battery or any part of third-party product?

  When you start Notepad without battery and put in place when Windows is loaded does the problem persist?

• laptop won't start windows xp up.error win32k.sys?

  My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

  Claire

  As you probably know Evesham closed to the public in 2008.

  I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

  Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

  I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

  As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

  If a factory restore does not work I would then test the memory.

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• Split HP 13 x 2: laptop won't start

  
  

  Hello @migo10,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the laptop won't start does not and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please consult the following document and let me know how it goes:

  Computers laptops HP - computer won't start (Windows 8)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START

  my laptop won, t start when I press the button nothing! It doesn, t start

  Tell me please help me

  With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.

  After you have done that reset for the power back in and try again, sometimes get you lucky.

• Acer aspire 5742 laptop computer g does not start or it does not charge

  When I plug the laptop to the charger the light to signal that the laptop is does not load computer up.the light laptop too turns not on. I tried to remove the battery and wait five minutes before turning back, but it still does not work I don't know what to do.please help me!

  Hello

  If the screen is not an Acer Aspire Logo appears when you try to turn on your laptop, remains empty, something is wrong with the hardware.

  If at all, nothing appears on the screen and no lights work contact Acer or a repair shop, local. :

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• Satellite A60 - laptop battery not charge/work

  Hello

  My stop laptop when you use the battery power. It will not re-start until I plugged in to the power supply. Every time I disconnected power laptop would shutdown. laptop does not work on batteries, no lights are working.
  When it is plugged seeing orange lights. Battery remains 90% fresh even after hours on departure av! I suggest that I can't use the battery power and the battery won't charge.
  Only a new battery in a month and has worked well up until now.

  I tried toshiba control energy saver but made no difference.

  I can't say with certainty if this happens because of the battery or something. In my opinion, it can be either battery or electronic power supply.
  Satellite A60's old laptop and everything is possible.

  Pre-installed software doesn t have a any influence on this. Toshiba power saver is preinstalled to consumption, Manager, with other words to help reduce battery power consumption and longer battery.

• Satellite A30 PSA30E - battery won't charge

  Hello

  I have a Toshiba Satellite A30 laptop ((n° de pièce = PSA30E-00E5-FR) and recently when plugged in, the battery is not, in fact he tell Chargers.) When the laptop is turned off, if you plug the battery icon orange lights and charges of battery, but when you start the laptop to halfway through start orange icon battery turns off and the battery won't charge. If you start the laptop just using the battery once it is in place and ongoing enforcement if you plug the nothing happening for example the battery charge orange icon does not illuminate.

  The power is always on the laptop the screen stays on its setting of intensity, but the laptop turns off when the battery runs down to 0%.
  I removed the battery and tried power the laptop just using the power grid, but the laptop does not turn on.

  Any ideas what wrong?

  If it is the battery which batteries would be compatible with my laptop to replace and how do 2nd hand/battery cost these days for my laptop?

  My battery model number = PA3250U-1BRS
  K000002280

  I found a battery on a site that resembles a Toshiba Satellite A35 (don't remember if it's A30 or Pro A30) - looking at the Toshiba Satellite A35, it's the same as my Toshiba Satellite A30 it would be compatible?

  Thanks for your time...

  Hello

  Eventually it s a battery but problem is just a suggestion.
  I do not recommend buying a second hand battery because second hand battery will discharge a lot faster.
  In my opinion, you should buy a new one.

  I googled a little bit for PA3250U-1BRS and found a few deals online, it seems that you can get it for 50-60 euros

  Regarding the battery A35.
  I think that it should be compatible with your laptop. The A35 is a Toshiba US series (A30 is the European model) and it of very similar to A30.

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• HP dv6000 pivillion. battery won't charge

  When I plug my adapter in my computer, the ac plug light but the light on the front of my computer does not light and I put 2 different batteries in it and both are dead and won't charge.

  glenna28 wrote:
  No, but the Middle blinks 3 times I think it's the light battery.

  Since you mentioned with the right replacement it is not yet getting started and saw that this is a DV6xxxx if my memory serves me right, these units had a GPU failure rate that would be more or less lead a cell phone dead. And you only choice at the moment is to repair defective GPU or new Board fixed GPU problem or the most recent purchase of a laptop that does not have those defective GPU that has been on these boards.