laptop won't start does not suddenly
My Lenovo 3000 V100, worked perfectly until about 3 hours when I turned off the system, the battery is also very good and loads correctly.
Now, it's just does not turn on, AC and DC. Can anyone give any suggestions on what could be the problem.
Thank you!
Remove the battery, plug the AC power, try to turn on the computer.
also try to press power button two or three minutes and check that it works.
Tags: Lenovo Notebooks
Similar Questions
-
Presario CQ60 wireless services won't start does not automatically
Hello
The blue light does not turn on automatically when I start my laptop upward, which means that the wireless is turned on. I have to press the orange button until it turns blue and then the wireless works. Although not a major problem, it's awkward because it takes a few minutes for the wireless to kick and find the signal wi - fi etc.
It's never happened before and I can only think it must be linked to me recently to get the card out wireless as part of the process of getting the fan to clear a jam. The wireless adapter has been connected back up ok because it does not start when you press the button, but I can't help but think that disconnection has energised it this problem, which means that it does not start automatically when the laptop is pulled up.
I have a Compaq CQ60 running Win7 32 bit.
Any help would be greatly appreciated - thanks in advance.
Hello
Try the following.
Download and reinstall HP Wireless Assistant from the link below.
http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe
When the installation is complete, restart the laptop.
When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.
Kind regards
DP - K
-
I recently downloaded the free version of AVG v.9, which seems to work very well. However Windows Defender no longer seems work fine, normally this is an error message saying that it does not work and I have to manually start even if I set it to start automatically. Sometimes it does not start at all. Is it a problem because I use AVG and I have to run Windows defender, while running AVG?
I got appreciatte all boards.
Thanks J.
AVG and defender in the face of a conflict between them.
And even if you change Microsoft Security Essentials, it will turn off Defender, because it has its own integrated version of Defender.
See you soon.
Mick Murphy - Microsoft partner
-
won't start does not after a recovery
My G61-320US... LAPTOP CLOSED JUST BY ITSELF AND I USED IT... WHEN I PUT IT, BUT I HAD AN OPTION OF RECOVERY AND HAS DONE FOR MORE THAN 3 DAYS NOW IT DID NOT START UP AND WHEN I PRESS THE POWER BUTTON IT JUST BLINKS OUNCES AND SHE
Do a hard reset:
Disconnect all devices and remove all devices USB and SD cards
Disconnect the power adapter, remove the battery and then press on and press and hold power for at least 15 seconds.
Plug the power adapter (but do not insert the battery), press the power button.
If the computer starts normally, close and reinsert the battery.
It would be an idea to make the hard drive Diagnostics.
-
Vista won't start does not correctly
I just reinstalled Vista OS because my computer just kept a loop saying a recent hardware or software installation may cause a problem but I haven't installed hardware or software. After the reinstallation of Vista, I still get the same loop, but it starts not eventful. Can someone help me solve this problem? Thank you
I hope that you formatted the HD before reinstalling, if not, then format & let auto install vista. This
is a clean install, unplug the network cable, printers, etc. before you start. Also, if it's a desktop pc,
replace battery MB, manual reading, & intel recommend to wait 10 minutes before a new
installed, this clears the CMOS memory. Once thru, on reboot, reset date/time etc., as it is by default, as well as change to
material of the add-on.
-
Backups of Vista won't start does not as expected
Backups of Vista were starting automatically as scheduled for the last 3 years, but now they do not start automatically. The backup works fine when I start it manually. I did not any changes to the schedule or to the device where the data is stored (external USB disk). I recently put on maintenance of Vista via Windows Update, did not observe other problems. Running Vista Home Premium 32-bit on a PC from Dell Quad with 4 GB of memory. Any ideas on what is at the origin of the outbreak of backups to fail?
Thank you
zxk1Hello Zxk1,
Thanks for posting in the Microsoft Answers forum! I suggest that search you your computer for any virus infection that may hinder your scheduled automatic backups. Below you will find a sew websites that provide public services that allows you to scan your computer from viruses and spyware:
Microsoft Windows malicious removal tool
This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=enSuperAntiSpyware
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
http://www.SUPERAntiSpyware.com/download.htmlBytes of Malware Anti-malware (Freeware)
http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.htmlTrend Micro HouseCall - Free Online Virus and Spyware Scanner
HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
http://housecall.trendmicro.com/Please let me know if this helps t solve your issueJ
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Application services won't start does not after Oracle Applications 11i Clone
Hi all
Can someone help me on this...
EBS: 11.5.9
Database: 9.2.0.3.0
After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
It's show time when I tried to start the services. Please find below
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Service control script execution:
/Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start
script gave:
****************************************************
ERROR: Timed out: Exception interrupted
Command line is maybe not valid
****************************************************
Thanks in advance...
SAIAutoConfig succeeded completely without error?
Please see (adstrtal.sh returns timeout error [331322.1 ID]).
Thank you
Hussein -
Process Manager won't start does not as a service
Hi all
We have a weekly reboot of the server, after restarting the service manager is not automatically indicating. I put the Manager as a windows service, and the file GLOBALS is uppercase only. I checked in the windows service, there is a name of service with OGGMGR1 and it is set to automatic. My error log file displays the following error:
2012-10-07 04:00:40 ERROR OGG - 00665 Oracle GoldenGate for Oracle, EXT1.prm Capture: OIC runtime error select a row (status = 3113-ORA-03113: end of file on communication channel), SQL < SELECT DECODE (archived, 'YES', 1, 0), status FROM v$ session WHERE the thread # =: ora_thread AND sequence # =: ora_seq_no >.
2012-10-07 04:00:40 OGG-01668 Oracle GoldenGate for Oracle, EXT1.prm Capture ERROR: PROCESS ABENDING.
2012-10-07 04:00:55 INFO OGG - 01087 Oracle GoldenGate for Oracle, Manager MGR.prm: Bishop received user logoff event.
2012-10-07 04:00:55 OGG - 01087 Oracle GoldenGate Capture for Oracle, DPUMP.prm INFO: received extract user logoff event.
2012-10-07 04:03:49 ERROR OGG - 00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI error the OCIServerAttach (status = 12560-ORA-12560: TNS:protocol adapter error).
2012-10-07 04:03:49 ERROR OGG - 01668 Oracle GoldenGate for Oracle, Manager mgr.prm: PROCESS ABENDING.
My env: windows server 2008R2 with GG:11.1.1.1.2, DB: Oracle 11.2.0.3
Thank youHello
May be that Manager service tried to start automatically before starting the database services because you could use the credentials database in your mgr settings file.
Use BOOTDELAYMINUTES setting in your file manager settings, this BOOTDELAYMINUTES can be used to delay the start AUTOMATIC settings until the database services are
has started.This parameter is used only for Windows.
I hope this will help you.
Annamalai -
Split HP 13 x 2: laptop won't start
Hello @migo10,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post on the laptop won't start does not and wanted to help you!
For starters, can you provide me with the product number of the laptop? Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?
In the meantime, please consult the following document and let me know how it goes:
Computers laptops HP - computer won't start (Windows 8)
Please let me know if this information has been helpful by clicking the thumbs up below. If this post has solved your problem, then please click accept as a Solution.
Have a great day!
-
HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success. Plugged external on another laptop, new files since the previous backup are no where. Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files. I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease. I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you
Hello
This backup after pressing F11 is a HP backup option, not a Microsoft option.
I suggest that you contact HP or ask their Support Forums.
It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.
Saving your files:
You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.
Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.
See you soon.
-
Original title: computer laptop (Windows 8) starts do not
Laptop: Sony Vaio
Processor: core i3 with 4 GB of memoryOperating system: Windows 8Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.I tried in the BIOS and it detects the hard drive, it means that hard drive still works.How to solve this problem?Hi Sunil,
Thanks for the reply.
I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.
Get help from Microsoft Windows activation
https://support.Microsoft.com/kb/950929?WA=wsignin1.0
Let us know if you need assistance.
-
information store service Exchange starts does not automatically
information store service Exchange starts does not automatically
Post in the Forums of Exchange Server:
http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve -
My Hp laptop computers microphone phone does not work. No one can hear me. ??????
Hello
Look at this:
Kind regards.
-
Original title: screen saver does not start because MSVCR100.dll was not found
After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:
ScreenSaver: Photo screensaver.scr - unable to locate component.
This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.
The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.
Help, please. Thank you.
Hello
It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.
But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.
-
HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START
my laptop won, t start when I press the button nothing! It doesn, t start
Tell me please help me
With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.
After you have done that reset for the power back in and try again, sometimes get you lucky.
Maybe you are looking for
-
Question about updating drivers for Tecra A9
Hello I noticed that support Toshiba updates drivers for Tecra A9 very slowly even if they introduce important features. For example, the display driver for 965 graphics worm 15 is much better than 14 worm distributed by Toshiba. I know that pilots a
-
Is there a way to find an evolutionary gap?
Hello I am currently a large amount of data points, recording 1 out of every 1000 points to a spreadsheet and save the last 1000 points to record in a spreadsheet when the program is finished. I wish I could know the overall variance of all the poin
-
After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software a
-
Can't get my HP Laser JEt 1300 to work with windows 8.1
Not sure if Im missing a step, but I can't get my Laser Jet 1300 to work with windows 8.1. Brand new computer and have spend 9 hours trying to install this. Must be missing a step. I get an error message after clicking on the button print...
-
There is the ENTERPRISE Server option installed on my 8700. I want to vsend and receive emails from email account different without making use of the BB Enterprise stars I would like to get rid of the company-installed program and replace it with the