Process Manager won't start does not as a service

Similar Questions

• Presario CQ60 wireless services won't start does not automatically

  Hello

  The blue light does not turn on automatically when I start my laptop upward, which means that the wireless is turned on. I have to press the orange button until it turns blue and then the wireless works. Although not a major problem, it's awkward because it takes a few minutes for the wireless to kick and find the signal wi - fi etc.

  It's never happened before and I can only think it must be linked to me recently to get the card out wireless as part of the process of getting the fan to clear a jam. The wireless adapter has been connected back up ok because it does not start when you press the button, but I can't help but think that disconnection has energised it this problem, which means that it does not start automatically when the laptop is pulled up.

  I have a Compaq CQ60 running Win7 32 bit.

  Any help would be greatly appreciated - thanks in advance.

  Hello

  Try the following.

  Download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• Windows Defender won't start does not automatically, it's because I use AVG anti-virus software?

  I recently downloaded the free version of AVG v.9, which seems to work very well. However Windows Defender no longer seems work fine, normally this is an error message saying that it does not work and I have to manually start even if I set it to start automatically. Sometimes it does not start at all.  Is it a problem because I use AVG and I have to run Windows defender, while running AVG?

  
  

  I got appreciatte all boards.

  
  

  Thanks J.

  AVG and defender in the face of a conflict between them.

  And even if you change Microsoft Security Essentials, it will turn off Defender, because it has its own integrated version of Defender.

  See you soon.

  Mick Murphy - Microsoft partner

• laptop won't start does not suddenly

  My Lenovo 3000 V100, worked perfectly until about 3 hours when I turned off the system, the battery is also very good and loads correctly.

  Now, it's just does not turn on, AC and DC. Can anyone give any suggestions on what could be the problem.

  Thank you!

  Remove the battery, plug the AC power, try to turn on the computer.

  also try to press power button two or three minutes and check that it works.

• won't start does not after a recovery

  My G61-320US... LAPTOP CLOSED JUST BY ITSELF AND I USED IT... WHEN I PUT IT, BUT I HAD AN OPTION OF RECOVERY AND HAS DONE FOR MORE THAN 3 DAYS NOW IT DID NOT START UP AND WHEN I PRESS THE POWER BUTTON IT JUST BLINKS OUNCES AND SHE

  Do a hard reset:

  Disconnect all devices and remove all devices USB and SD cards

  Disconnect the power adapter, remove the battery and then press on and press and hold power for at least 15 seconds.

  Plug the power adapter (but do not insert the battery), press the power button.

  If the computer starts normally, close and reinsert the battery.

  It would be an idea to make the hard drive Diagnostics.

• Vista won't start does not correctly

  I just reinstalled Vista OS because my computer just kept a loop saying a recent hardware or software installation may cause a problem but I haven't installed hardware or software. After the reinstallation of Vista, I still get the same loop, but it starts not eventful. Can someone help me solve this problem? Thank you

  I hope that you formatted the HD before reinstalling, if not, then format & let auto install vista. This

  is a clean install, unplug the network cable, printers, etc. before you start. Also, if it's a desktop pc,

  replace battery MB, manual reading, & intel recommend to wait 10 minutes before a new

  installed, this clears the CMOS memory. Once thru, on reboot, reset date/time etc., as it is by default, as well as change to

  material of the add-on.

• Backups of Vista won't start does not as expected

  Backups of Vista were starting automatically as scheduled for the last 3 years, but now they do not start automatically.  The backup works fine when I start it manually.  I did not any changes to the schedule or to the device where the data is stored (external USB disk).  I recently put on maintenance of Vista via Windows Update, did not observe other problems.  Running Vista Home Premium 32-bit on a PC from Dell Quad with 4 GB of memory.  Any ideas on what is at the origin of the outbreak of backups to fail?

  Thank you
  zxk1

  Hello Zxk1,

  Thanks for posting in the Microsoft Answers forum! I suggest that search you your computer for any virus infection that may hinder your scheduled automatic backups. Below you will find a sew websites that provide public services that allows you to scan your computer from viruses and spyware:

  Microsoft Windows malicious removal tool
  This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

  SuperAntiSpyware
  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
  http://www.SUPERAntiSpyware.com/download.html

  Bytes of Malware Anti-malware (Freeware)
  http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

   

  Trend Micro HouseCall - Free Online Virus and Spyware Scanner
  HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
  http://housecall.trendmicro.com/

  Please let me know if this helps t solve your issueJ

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Application services won't start does not after Oracle Applications 11i Clone

  Hi all
  
  Can someone help me on this...
  
  EBS: 11.5.9
  Database: 9.2.0.3.0
  
  After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
  It's show time when I tried to start the services. Please find below
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  
  Service control script execution:
  /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start
  
  script gave:
  ****************************************************
  ERROR: Timed out: Exception interrupted
  
  Command line is maybe not valid
  ****************************************************
  
  Thanks in advance...
  SAI

  AutoConfig succeeded completely without error?

  Please see (adstrtal.sh returns timeout error [331322.1 ID]).

  Thank you
  Hussein

• information store service Exchange starts does not automatically

  information store service Exchange starts does not automatically

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  even using restore window can not solve the problem, I use windows 7 pro, this happen after the update I have install on September 24, 2012

  Hello

  1. What is the KB (Knowledge Base) number associated with the update?

  2. the problem persists only with ORB start?

  Method 1: Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• I get an error, "the executable file that this service is configured to run does not implement the service" when I try to synchronize the time in Windows XP.

  After trying to fix the error of time synchronization by typing net start w32time that receipt of the message in the title.  In addition, type net stop w32time responded that the service was not working.

  Original title: the executable that this service is configured to run does not implement the service

  After checking the configuration in the registry and check or update if necessary from the link below:

  Then the time errors that I got from the command prompt window:
  Order--> net stop w32time & net start w32time
  Response--> The Windows Time service is not started.

  Order--> net start w32time
  Response--> system error 1083.
  The executable program that this service is configured to run in does not implement the service.

  --> Command w32tm/Resync /rediscover
  Response--> sending command to local computer resync...
  The following error occurred: the RPC server is unavailbale. (0x800706BA)

  Hi Mitchell_G,

  Thank you for keeping us posted.

  The steps of items offered in the previous post?

  We know if you need help. We will be happy to help you.

  Thank you.

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• ORA-12514 TNS: Listener does not currently of service required

  Hi all
  
  
  I created a thread here only three days ago on the question above:
  
  ORA-12514 TNS: Listener does not currently of service required
  
  and I ended install oracle again this time around just after 2 days I'm getting the same problem again. I have not yet published that any same file not open it not even anywhere near her. Can anyone tell me the reason?
  
  Thank you and best regards,
  
  Lucky aka Lastw0nd3r
  
  Published by: lastw0nd3r on August 5, 2010 07:24

  SQL NET should now work for you.*
  If so, please mark as ANSWER

  but where was I wrong?

  the database is not started so the listener did not know the DB Service