Presario CQ60 wireless services won't start does not automatically

Hello

The blue light does not turn on automatically when I start my laptop upward, which means that the wireless is turned on. I have to press the orange button until it turns blue and then the wireless works. Although not a major problem, it's awkward because it takes a few minutes for the wireless to kick and find the signal wi - fi etc.

It's never happened before and I can only think it must be linked to me recently to get the card out wireless as part of the process of getting the fan to clear a jam. The wireless adapter has been connected back up ok because it does not start when you press the button, but I can't help but think that disconnection has energised it this problem, which means that it does not start automatically when the laptop is pulled up.

I have a Compaq CQ60 running Win7 32 bit.

Any help would be greatly appreciated - thanks in advance.

Hello

Try the following.

Download and reinstall HP Wireless Assistant from the link below.

http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

When the installation is complete, restart the laptop.

When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Windows Defender won't start does not automatically, it's because I use AVG anti-virus software?

    I recently downloaded the free version of AVG v.9, which seems to work very well. However Windows Defender no longer seems work fine, normally this is an error message saying that it does not work and I have to manually start even if I set it to start automatically. Sometimes it does not start at all.  Is it a problem because I use AVG and I have to run Windows defender, while running AVG?


    I got appreciatte all boards.


    Thanks J.

    AVG and defender in the face of a conflict between them.

    And even if you change Microsoft Security Essentials, it will turn off Defender, because it has its own integrated version of Defender.

    See you soon.

    Mick Murphy - Microsoft partner

  • Application services won't start does not after Oracle Applications 11i Clone

    Hi all

    Can someone help me on this...

    EBS: 11.5.9
    Database: 9.2.0.3.0

    After cloning oracle Application Apache, concurrent managers and other services are in place and works perfectly but my forms and reports services do not come to the top.
    It's show time when I tried to start the services. Please find below

    Service control script execution:
    /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfrmctl.sh start

    script gave:
    ****************************************************
    ERROR: Timed out: Exception interrupted

    Command line is maybe not valid
    ****************************************************


    Service control script execution:
    /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adrepctl.sh start

    script gave:
    ****************************************************
    ERROR: Timed out: Exception interrupted

    Command line is maybe not valid
    ****************************************************


    Service control script execution:
    /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmcctl.sh start

    script gave:
    ****************************************************
    ERROR: Timed out: Exception interrupted

    Command line is maybe not valid
    ****************************************************


    Service control script execution:
    /Disk1/Oracle/dev1comn/Admin/scripts/dev1_dataprepdev1/adfmsctl.sh start

    script gave:
    ****************************************************
    ERROR: Timed out: Exception interrupted

    Command line is maybe not valid
    ****************************************************

    Thanks in advance...
    SAI

    AutoConfig succeeded completely without error?

    Please see (adstrtal.sh returns timeout error [331322.1 ID]).

    Thank you
    Hussein

  • information store service Exchange starts does not automatically

    information store service Exchange starts does not automatically

    Post in the Forums of Exchange Server:
    http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

  • Database service starts does not automatically

    I've set up a new service of database on a cluster of 3 nodes running 11.1.0.6 and I can start service manually without any problem, but if I bounce the database, the database service does not automatically start even if the database is running - what is the procedure to make sure that the service starts automatically with the database?

    Thank you

    short answer - service_name parameter. Longer answer as well as a very useful document is at http://www.ardentperf.com/pub/services-schneider07.pdf

    illustration

    SYS @ DB10G >SHOW PARAMETER SERVICE_NAMES

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
service_names                        string      db10g
SYS @ DB10G >HOST LSNRCTL SERVICES

LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:18

Copyright (c) 1991, 2007, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "db10g" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "db10gXDB" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER 
         (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
Service "db10g_XPT" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
The command completed successfully

SYS @ DB10G >ALTER SYSTEM SET SERVICE_NAMES=DB10G,MY_SERVICE
  2  ;

System altered.

SYS @ DB10G >ALTER SYSTEM REGISTER
  2  ;

System altered.

SYS @ DB10G >HOST LSNRCTL SERVICES

LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:48

Copyright (c) 1991, 2007, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "MY_SERVICE" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "db10g" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "db10gXDB" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1002 state:ready
         DISPATCHER 
         (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
Service "db10g_XPT" has 1 instance(s).
  Instance "db10g", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
The command completed successfully

SYS @ DB10G >

    Niall Litchfield
    http://www.orawin.info/

    Published by: Niall Litchfield Sep 10, 2008 12:42 TO REMOVE the server name.

  • Process Manager won't start does not as a service

    Hi all
    We have a weekly reboot of the server, after restarting the service manager is not automatically indicating. I put the Manager as a windows service, and the file GLOBALS is uppercase only. I checked in the windows service, there is a name of service with OGGMGR1 and it is set to automatic. My error log file displays the following error:

    2012-10-07 04:00:40 ERROR OGG - 00665 Oracle GoldenGate for Oracle, EXT1.prm Capture: OIC runtime error select a row (status = 3113-ORA-03113: end of file on communication channel), SQL < SELECT DECODE (archived, 'YES', 1, 0), status FROM v$ session WHERE the thread # =: ora_thread AND sequence # =: ora_seq_no >.
    2012-10-07 04:00:40 OGG-01668 Oracle GoldenGate for Oracle, EXT1.prm Capture ERROR: PROCESS ABENDING.
    2012-10-07 04:00:55 INFO OGG - 01087 Oracle GoldenGate for Oracle, Manager MGR.prm: Bishop received user logoff event.
    2012-10-07 04:00:55 OGG - 01087 Oracle GoldenGate Capture for Oracle, DPUMP.prm INFO: received extract user logoff event.
    2012-10-07 04:03:49 ERROR OGG - 00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI error the OCIServerAttach (status = 12560-ORA-12560: TNS:protocol adapter error).
    2012-10-07 04:03:49 ERROR OGG - 01668 Oracle GoldenGate for Oracle, Manager mgr.prm: PROCESS ABENDING.

    My env: windows server 2008R2 with GG:11.1.1.1.2, DB: Oracle 11.2.0.3

    Thank you

    Hello

    May be that Manager service tried to start automatically before starting the database services because you could use the credentials database in your mgr settings file.

    Use BOOTDELAYMINUTES setting in your file manager settings, this BOOTDELAYMINUTES can be used to delay the start AUTOMATIC settings until the database services are
    has started.

    This parameter is used only for Windows.

    I hope this will help you.
    Annamalai

  • laptop won't start does not suddenly

    My Lenovo 3000 V100, worked perfectly until about 3 hours when I turned off the system, the battery is also very good and loads correctly.

    Now, it's just does not turn on, AC and DC. Can anyone give any suggestions on what could be the problem.

    Thank you!

    Remove the battery, plug the AC power, try to turn on the computer.

    also try to press power button two or three minutes and check that it works.

  • Backups of Vista won't start does not as expected

    Backups of Vista were starting automatically as scheduled for the last 3 years, but now they do not start automatically.  The backup works fine when I start it manually.  I did not any changes to the schedule or to the device where the data is stored (external USB disk).  I recently put on maintenance of Vista via Windows Update, did not observe other problems.  Running Vista Home Premium 32-bit on a PC from Dell Quad with 4 GB of memory.  Any ideas on what is at the origin of the outbreak of backups to fail?

    Thank you
    zxk1

    Hello Zxk1,

    Thanks for posting in the Microsoft Answers forum! I suggest that search you your computer for any virus infection that may hinder your scheduled automatic backups. Below you will find a sew websites that provide public services that allows you to scan your computer from viruses and spyware:

    Microsoft Windows malicious removal tool
    This tool checks your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove the infection if it is found. Microsoft will release an updated version of this tool the second Tuesday of each month.
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=ad724ae0-e72d-4f54-9ab3-75b8eb148356&displaylang=en

    SuperAntiSpyware
    SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms.
    http://www.SUPERAntiSpyware.com/download.html

    Bytes of Malware Anti-malware (Freeware)
    http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

     

    Trend Micro HouseCall - Free Online Virus and Spyware Scanner
    HouseCall is a free on-line virus scanner offered by Trend Micro, which checks if a computer has been infected by viruses, software spyware or other malicious software. HouseCall performs additional security checks to identify and fix vulnerabilities to prevent re-infection.
    http://housecall.trendmicro.com/

    Please let me know if this helps t solve your issueJ

    Adam
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • won't start does not after a recovery

    My G61-320US... LAPTOP CLOSED JUST BY ITSELF AND I USED IT... WHEN I PUT IT, BUT I HAD AN OPTION OF RECOVERY AND HAS DONE FOR MORE THAN 3 DAYS NOW IT DID NOT START UP AND WHEN I PRESS THE POWER BUTTON IT JUST BLINKS OUNCES AND SHE

    Do a hard reset:

    Disconnect all devices and remove all devices USB and SD cards

    Disconnect the power adapter, remove the battery and then press on and press and hold power for at least 15 seconds.

    Plug the power adapter (but do not insert the battery), press the power button.

    If the computer starts normally, close and reinsert the battery.

    It would be an idea to make the hard drive Diagnostics.

  • Vista won't start does not correctly

    I just reinstalled Vista OS because my computer just kept a loop saying a recent hardware or software installation may cause a problem but I haven't installed hardware or software. After the reinstallation of Vista, I still get the same loop, but it starts not eventful. Can someone help me solve this problem? Thank you

    I hope that you formatted the HD before reinstalling, if not, then format & let auto install vista. This

    is a clean install, unplug the network cable, printers, etc. before you start. Also, if it's a desktop pc,

    replace battery MB, manual reading, & intel recommend to wait 10 minutes before a new

    installed, this clears the CMOS memory. Once thru, on reboot, reset date/time etc., as it is by default, as well as change to

    material of the add-on.

  • After restarting the Services, service of the Foundation does not start

    Hi all

    Recently, I applied the patch and restarted services, later noted that the services of the Foundation does not start. I mentioned newspapers and show error below.

    < 29 April 2015 19:45:30 PDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 of Oracle Corporation >

    < 29 April 2015 19:45:31 PDT > < critical > < security > < BEA-090518 > < could not decrypt the username of {ESA} attribute value = 9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA in the C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties file. If you copied an attribute costed boot.properties of another area in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, replace the attribute encrypted by its value in clear text, and then restart the server. The attribute will be encrypted again. Otherwise, change all attributes encrypted values in clear text, and then restart the server. All the attributes of encryptable will be encrypted again. Decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException. >

    Enter the user name to start WebLogic server:

    I have connected to the Weblogic Server and checked, the service of the Foundation is not started.

    We do not have the backup of the installation folder.

    Manually, I have edited the user name and password and the services, started but no luck.

    Get an idea on processBootProperties.cmd, I'll set it off for the new boot.properties.

    Please suggest.

    Thank you

    Hi all

    I have manually enter the credentials for the logical server and services. It worked.

    I did the same thing first, but I made a few typo errors in credentials, he killed for more than 1 hour...) :

    Thank you

  • When you try to print the document his service hence giving error does not

    I am using windows xp pro sp2

    When you try to print the document his service hence giving error does not

    then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

    Please help me

    Hi kalpesh_vaghela,

    1. Did you the latest changes on the computer?
    2. What is the full error message that you receive?
    3. What is the number and model of the printer?
    4. You use any program to print the document?
    5. Are you experiencing a similar problem with any program that allows you to print?
    6. You have security software installed on the computer?

    Method 1

    See the link below and try the fixit tool available, check if it helps.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

     

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    When you are prompted, click restart to restart the computer.

  • After installing service pack 2, computer does not recognize the cd drive

    Original title: after installation of service pack 2, computer does not recognize my cd drive, I deleted the computer recognizes the drive but the programs are not yet loads

    My burning software are not yet picking up the car, it says no recorder found or is just let me burn, I had none of these problems before I started to install the updates

    Hi Shon S,.

    Since you are facing problems after you remove the filters, you can try to uninstall and reinstall the DVD player and check.

    For more information, you can refer to the following article:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Hope this information is useful.

  • vCenter service starts do not automatically after the server restarts

    Hello

    We use vCenter Server 5.5.0 build 1476327 installed by using Installation Mode on Windows Server 2008 R2 with SQL 2008 R2. All SSO, inventory service, vcenter, customer web etc, are on the same server.

    VCenter server service is set to automatic (startup type), Local System (connect as). However at the restarting windows server vCenter, vcenter service does not automatically start and it gives error in the vpxd.log below. But if we manually start the services vcenter, it works very well.

    2014 02-12 T 17: 38:49.186 + 05:30 [03016 info 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VC55DB with username vpxuser

    2014 02-12 T 17: 38:55.750 + 05:30 [03016 info 'Default'] [VdbSchemaLoader::LookupSchemaFromDB] loaded schema information and DB index

    2014 02-12 T 17: 38:59.586 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6058ed8 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12094

    2014 02-12 T 17: 39:12.034 + 05:30 [02040 WARNING opID "VpxProfiler" SWI-56f32f43 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12448

    2014 02-12 T 17: 39:24.094 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-31169898 =] VpxUtil_InvokeWithOpId [TotalTime] took 12059 ms

    2014 02-12 T 17: 39:36.549 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-6a5d128c =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12451

    2014 02-12 T 17: 39:48.618 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6d7d4b3 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12045

    2014 02-12 T 17: 40:00.625 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-55e83917 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12007

    2014 02-12 T 17: 40:12.994 + 05:30 [02040 WARNING opID "VpxProfiler" SWI - 3113 c 398 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12251

    2014 02-12 T 17: 40:25.196 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

    2014 02-12 T 17: 40:37.852 + 05:30 [00928 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12646

    2014 02-12 T 17: 40:49.875 + 05:30 [02036 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12019

    2014 02-12 T 17: 40:56.287 + 05:30 [03016 info 'Default'] judgment of VMware VirtualCenter forcing now

    Check connectivity ODBC (SQL authentication), looks very good. Don't know what are these VpxProfiler warnings in the newspaper, after which the VirtualCenter is forced to stop.

    Please advise on this.

    Thanks in advance!

    Try to set the vcenter service in Automatic (delayed start mode) leave the sql first service started. to the Webcomic.

    hope it will settle your error. same problem I faced and fixed in this way.

    Thank you.

  • OSWatcher BB does not automatically start after reboot on a linux machine

    Hello
    I configured the OSW on my 2 node RAC on linux.
    When I start to startOSWbb.sh as the user oracle, it works ok.
    I installed the osw-service - 0.0.6 - 1.noarch.rpm rpm to add it to the service of linux, and indeed, he created the etc/init.d/osw.
    but after restarting the service of the OSW does not work. I see that everything has begun and has created a new folder to archive, a new vmstat.header, new vtop.tmp/tmp. but that's all.
    It is not running and it do right files in archive folder / file.
    also ps - ef | grep-i osw returns nothing
    where can I find its newspapers (saw nothing to NS)

    Thank you
    Yaron



    install oswatcher for RAC
    ============================

    mkdir/users/oracle/osw Pei
    CD/users/oracle/osw /.
    mkdir lxodsdb1tst
    mkdir lxodsdb2tst
    CP oswbb511_512.tar/users/oracle/osw/lxodsdb1tst
    tar - xvf oswbb511_512.tar
    CD oswbb

    lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb > ls
    analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
    docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
    Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh


    CP Exampleprivate.net private.net
    chmod 775 private.net
    VI private.net

    ######################################################################
    # This file contains examples of how to monitor private networks. TO
    # monitor your private networks create an executable file in the same
    # directory named private.net. Use the example for your host below operating system.
    # Make sure that you do not delete the last line in this file. Your file
    # private.net MUST contain the line rm lock.file.
    ######################################################################
    #Linux example
    ######################################################################
    echo "zzz * '' date'.
    Traceroute - r f lxodsdb2tst-priv
    Traceroute - r f lxodsdb1tst-priv
    ######################################################################
    # DO NOT DELETE THE NEXT LINE!
    #
    ######################################################################
    Locks/lock.file RM


    ./startOSWbb.sh


    lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >./startOSWbb.sh
    lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >
    Info... You don't have a value for snapshotInterval.
    Info... Using the default value = 30
    Info... You don't have a value for archiveInterval.
    Info... Using the default value = 48
    Defining archive log directory to/users/oracle/osw/lxodsdb1tst/oswbb/archive

    Test for the discovery of the utilities...
    VMSTAT found on your system.
    IOSTAT found on your system.
    MPSTAT found on your system.
    NETSTAT found on your system.
    TOP found on your system.

    Testing for the discovery of the OS CPU COUNT
    OSWbb is looking for the NUMBER of CPUS on your system
    NUMBER of CPUS will be used by oswbba to automatically search for cpu problems

    NUMBER of CPU found on your system.
    UC = 24

    Discovery completed.






    =================================================== on lxodsdb2tst =================================

    lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst > tar - xvf oswbb511_512.tar
    CD oswbb

    lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb > ls
    analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
    docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
    Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh



    xodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >./startOSWbb.sh
    lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >
    Info... You don't have a value for snapshotInterval.
    Info... Using the default value = 30
    Info... You don't have a value for archiveInterval.
    Info... Using the default value = 48
    Defining archive log directory to/users/oracle/osw/lxodsdb2tst/oswbb/archive

    Test for the discovery of the utilities...
    VMSTAT found on your system.
    IOSTAT found on your system.
    MPSTAT found on your system.
    NETSTAT found on your system.
    TOP found on your system.

    Testing for the discovery of the OS CPU COUNT
    OSWbb is looking for the NUMBER of CPUS on your system
    NUMBER of CPUS will be used by oswbba to automatically search for cpu problems

    NUMBER of CPU found on your system.
    UC = 24

    Discovery completed.

    From black box OSWatcher v5.1.1 Sun Nov 11 10:18:09 IST 2012
    With SnapshotInterval = 30
    With ArchiveInterval = 48

    OSWatcher Black Box - written by Carl Davis, Centre of Expertise,
    Oracle Corporation
    For questions about installation and use, please go to MOS (Note: 301137.1()
    If you need assistance or have any comments or improvements
    queries, you can email me [email protected]


    Data are stored in the directory: / users/oracle/osw/lxodsdb2tst/oswbb/archive

    From the collection of data...




    ==========================================install osw rpm===========================================

    quo
    CD/users/oracle/osw /.

    [root@lxodsdb1tst osw] # rpm - ihv osw-service - 0.0.6 - 1.noarch.rpm
    Preparing... ########################################### [100%]
    1:OSW - service # [100%]

    VI/etc/sysconfig/osw

    # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
    #OSWHOME = / opt/oswbb
    OSWHOME = / users/oracle/osw/lxodsdb1tst/oswbb
    # OSWINTERVAL set the number of seconds between collections
    OSWINTERVAL = 30
    # OSRETENTION set the number of hours logs must be kept
    OSWRETENTION = 168
    # Put OSUSER to the owner of the directory OSWHOME
    OSWUSER = oracle




    [root@lxodsdb1tst osw] # / sbin/chkconfig osw on
    [root@lxodsdb1tst osw] # / sbin/service osw start

    Here's what worked for me (I had the same problem):

    I uninstalled the osw-service RPM.

    I've added in /etc/rc.local the following command:

    ~Oracle/bin/oswbb CD & / bin/su oracle-c ' source ~oracle/.osw_profile & nohup./startOSWbb.sh 60 240 > / dev/null 2 > & 1 & ".

    Where:

    ~Oracle/bin/oswbb is where I untarred archive oswbb520.tar

    ~Oracle/.osw_profile looks like this (it has the same content as the old/etc/sysconfig/osw):

    # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
    OSWHOME = / home/oracle/bin/oswbb / ${HOSTNAME}
    # OSWINTERVAL set the number of seconds between collections
    OSWINTERVAL = 60
    # OSRETENTION set the number of hours logs must be kept
    OSWRETENTION = 240
    # Put OSUSER to the owner of the directory OSWHOME
    OSWUSER = oracle
    # Set the correct destination folder
    Export OSWBB_ARCHIVE_DEST = / home/oracle/log/oswbb / ${HOSTNAME}

    Published by: user13134683 on November 24, 2012 10:01

Maybe you are looking for