Large data Lite v3.0 and spark.

Similar Questions

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Split a large data file

  Hello:

  I have a large .dat file that contains multiple groups of data. I tried the Import Wizard, but it is only able to analyze all the data channels (columns). How to create a data plugin that is capable of breaking a large file into several groups of data?

  Example Structure:

  Comments and header information

  Group info

  Group info

  Group info

  Channels

  Data...

  Group info

  Group info

  Group info

  Channels

  Data...

  and it repeats.

  My goal to have in separate groups is to import each group of data in the form of sheets in an excel file.

  Hello stfung,

  Please find attached a draft for the use. Download the file "URI" on your computer and then double click on it. This will install a use called "ModTest-text file.

  The major section of the Plugin meta-data handling. reading data from the signal into groups is the smallest part.

  If you are interested in this part of the script is in a function called "ProcessSignals(oFile,oGroup)".

  Please let me know if the plugin works for you.

  Andreas

• IO error: output file: application.cod too large data section

  Hello, when I compile my application using BlackBerry JDE, I get the following error:

  I/o Error: output file: application.cod too large data section

  I get the error when you use the JDE v4.2.1 or JDE v4.3. It works very well for v4.6 or higher.

  I have another forum post about it here.

  I also read the following article here.

  On this basis I tried to divide all of my application, but that doesn't seem to work. The best case that it compiles for awhile and the problem is that I add more lines of code.

  I was wondering if someone could solve the problem otherwise. Or if someone knows the real reason behind this question?

  Any help will be appreciated.

  Thank you!

  I finally managed to solve this problem, here is the solution:

  This problem occurs when the compiler CAP is not able to give an account of one of the data resources. The CAP compiler tries to package the data sections to a size of 61440 bytesdefauly max. "You can use the option of CAP'-datafull = N' where N is the maximum size of the data section and set the size to be something less than the default value. With a few essays on the size, you'll be able to work around the problem.

  If someone else if this problem you can use the same trick to solve!

• How to install the large data file?

  Anyone know how I can install large binary data to BlackBerry files during the installation of an application?

  My application needs a size of 8 MB of the data file.

  I tried to add the file in my BlackBerry project in the Eclipse environment.

  But the compiler could not generate an executable file with the following message.

  «Unrecoverable internal error: java.lang.NullPointerException.» CAP run for the project xxxx»

  So, I tested with a small binary file. This time, the compiler generated a cod file. but the javaloader to load the application with this message.

  "Error: file is not a valid Java code file.

  When I tried with a small plus, we managed to load, but I failed to run the program with that.

  "Error at startup xxx: Module 'xxx' has verification error at offset 42b 5 (codfile version 78) 3135.

  Is it possible to include large binary data files in the cod file?

  And what is the best practice to deal with such a large data files?

  I hope to get a useful answer to my question.

  Thanks in advance for your answer.

  Kim.

  I finally managed to include the large data file in library projects.

  I have divided the data file in 2 separate files and then each file added to library projects.

  Each project the library has about 4 MB of the data file.

  So I have to install 3 .cod files.

  But in any case, it works fine. And I think that there will not be any problem because I use library projects only the first time.

  Peter, thank you very much for your support...

  Kim

• How to calculate daily, hourly average for the very large data set?

  Some_Timestamp	"Parameter1"	Parameter2
  1 JANUARY 2015 02:00. 00:000000 AM - 07:00	2341.4534	676341.4534
  1 JANUARY 2015 02:00. 01:000000 AM - 07:00	2341.4533	676341.3
  1 JANUARY 2015 03:04. 01:000000 PM - 07:00	5332.3533	676341.53
  1 JANUARY 2015 03:00. 01:000046 PM - 07:00	23.34	36434.4345
  JANUARY 2, 2015 05:06.01:000236 AM - 07:00	352.33	43543.4353
  JANUARY 2, 2015 09:00. 01:000026 AM - 07:00	234.45	3453.54
  3 FEBRUARY 2015 10:00. 01:000026 PM - 07:00	3423.353	4634.45
  FEBRUARY 4, 2015 11:08. 01:000026 AM - 07:00	324.35325	34534.53

  We have data as above a table and we want to calculate all the days, the hourly average for large data set (almost 100 million).  Is it possible to use the sql functions of analysis for better performance instead of the ordinary average and group of?  Or any other way better performance?

  Don't know if that works better, but instead of using to_char, you could use trunc. Try something like this:

  select
      trunc(some_timestamp,'DD'),
      avg(parameter1)
  from
     bigtable
  where
     some_timestamp between systimestamp-180 and systimestamp
  group by
     trunc(some_timestamp,'DD');
  

  Hope that helps,

  dhalek

• Why import data if ready schema and index create, increase in Undo TableSpace

  I have a problem importing data.
  When I export data don't have schema import include the index schema.
  And then I import the schema ready.
  When I import data, I find this Undo TableSpace increase very fast.
  I have therefore two tests.
  1. IMPORT of data and index, every thing ok look
  2 import a schema includes index
  and then import data. Undo Tablespace very rapid increase

  If you mean undo tablespace increase in order to read consisten read.

  N ° cancel space use increases due to the DML. (requests for consistent readings read undo, they generate no cancellation to grow)

  so you're saying that redo log appear, rollback undo segment will increase.

  N ° increase in written cancellations results increase in roll forward.

  IF we import large data, we must export data with the index and import data right now

  If you import large data, you must create the indexes after the data is imported. If the index definitions are included in the export, the default behavior is that import will create them once the data is imported. To do this, undo lower for indexes.
  Note This will generate redo for the creation (but does not cancel and therefore not generate recovery for cancellation). You can avoid this by manually running CREATE INDEX... NOLOGGING - but it means you need to get and modify the scripts CREATE INDEX.

  Hemant K Collette

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• The application of health on my new 6s shows "no data" power, active energy and stand hours of rest.

  Health app shows "no data" power, active energy and stand hours of rest

  Hello, Mjalderman.

  Thank you for visiting the communities of Apple support.

  I understand that some application of health data is not followed.  Looks like you don't have a device such as an Apple Watch or similar tracker connected to your iPhone 6s.  You would need a type of source or fitness tracker to collect these data before it would show in these categories.

  Collect health and fitness

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch

  I have included a few options of our Apple store to give you an idea of what is needed to keep these categories.  You are not limited to these options.

  Fitness Tracker

  See you soon

• import excel data to labVIEW, filtering and exporting to Excel

  LabVIEW dear specialists,

  I have about 2500 data each for acceleration and force stored in two excel columns of the worksheet as well as time data in another column. My problem is to purify my data of noise so I could generate thin sinusoidal signals for my thesis. I'm still new to labVIEW and I would like to ask for help to import my data from labVIEW, filter and exporting to Excel. Please help me. I enclose my data below. Thank you very much.

  froebaruch

  Hello!

  These could be good starting points:

  http://www.NI.com/analysis/Excel.htm

  https://decibel.NI.com/content/docs/doc-8226

  A few examples delivered with Labview, too.

  Kind regards

  Marco

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.