laser jet p1102: survey
How do I know when I need ink or ink level?
Hi @eslam_shehata,
Welcome to the Forums of HP Support!
I understand that you are looking for information on how to check the level of ink for your printer HP Laserjet P1102. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
Here are a few ways to check your printer ink levels.
- Please download and run the print and Scan of the doctor, it displays the ink levels.
- HP LaserJet Pro printers - print a configuration or State Page
Use one of the following methods to print a Setup page.
- Open the Printers folder.
Tags: HP Printers
Similar Questions
-
Laser Jet P1102s: Win7Control Laser Jet P1102s Panel question
After the successful installation of my new Laser Jet P1102s on Windows 7 (32 bit), I found two icons in the control panel (see attachment). One is on the right side OK - the printer works well. But there is a sort of warning sign near the left ikon. Someone knows the reason or the sense of that?
THX
Hi Hegefer,
Thanks for letting me know that the icon was not restarted.
I think that's the Smart Install which automatically load the printer again on the restart and we can simply turn off so that it will not continue.
Here are the instructions if you want to proceed when you have time.
Follow these steps to disable the Smart Install. Select printer not PC:
On the Windows computer, go to start, computer, right-click the CD for the
printer and left click Open in a new window, go to smart util/siutility.exe/HP install utility.
Shows printer or PC - select printer.
Then click on disable.Have a great weekend!
-
HP Laser Jet P1102 wireless linux OS... ?
How can I set up a wireless HP Laser Jet P1102 printer to work with an OS linux.. ?
DaveDWArveyess,
This site should help with drivers and install:
http://hplipopensource.com/hplip-Web/index.html
Good luck!
-
When I give a print, only blank page comes my printer is HP Laser Jet P1102
When I give a print, only blank page comes my printer is HP Laser Jet P1102
Hi aremps,
1 did you changes to the computer before the show?
2. what operating system you have installed in the computer?This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.
Please select the operating system and follow the instructions to solve the problem:
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=enPlease report if you are still having the problem. I will be happy to provide you with additional options.
-
IHAVE hp laser jet p1102 and hp laser jet1020
IHAVE hp laser jet p1102 and hp laser jet1020 and ihve macbook air iwont software for printers thank u
Here is a link that will provide you with the software and the driver for the LaserJet P1102.
Sorry, the LaserJet 1020 is not compatible with the Mac software.
-
power of incompatibility input (laser jet p1102 pro hp)
Hello
I bought a printer p1102 considering that it will work for 110 ac and AC 220 but when I tried to install the CA 220-240, 50/60 Hz wrriten system on the back of the it. Is it posible that it will work on 110 AC because my current environment doesent supports 220 AC
Based on the technical specifications, there are two type of difference in the model:
MODEL specification 110 volts 220 volts
Power supply requirements - 115 to 127 V (+/-10%)
-
My printer print 2 Facer habit any more laser jet P1102 hp
I'm running Mac os x 10.8.2 and until there is about 3 weeks, I was able to print double-sided (manual feed) I would get a little pop box telling me to push go once I put the 1 series of documents that came the printer threw it into the tray to paper to begin the second side.
I get MORE than the box more and now nothing will print 2 sides because of this, the printer says he's waiting for me, but no. box *.
Normally, I have to print PDF slides for the school with 100 + slides by chapter, so I use slides mutiple by option of the page and use the front two but now nothing will print 2 Facer. Not even the Pages, or text editior will print on 2 sides, due to the printer "pop up box" just never came up. Help, please
I tried to delete the printer, adding the printer again, update drivers, I even restored my count to an earlier saved version of the Jan 4. I'm willing to try anything at this point and I ran out of my own ideas.
On another forum, someone suggested opening and closing of the compartment of toner instead of press 'ok '.
Low Tech, but maybe it will work.
HGW
-
HP LASER JET P1102: Scanner error Laserjet P1102 52.0 Professional
Hi, I need some help or advice I can't use my printer 3 months when I try to print I get an error message like this "scanner error of 52.0!"
I want to find a solution for this problem!
Hi @CAMARAIZ,
In addition to my post, if you are unable to print the 'Page or report Configuration' there is a hardware problem. Try the hard reset and if the problem persists, contact HP.
Contact HP for service in all countries except Asia-Pacific. -
My HP Laser Jet P1102 does not recognize that I have installed a new toner cartridge - still to come up with "out of toner" alert. I tried off, reinstall the cartridge and generally fiddling around with it but not joy. She also refuses to notice when I replaced the paper after the execution of work environment or put paper in the tray to print side 2 - he's there flashing message 'replace paper' until I have give it away and remove work - help please!
Let's try the second kind of reset mentioned in this video, because it seems that your printer has difficulties to recognize its sensors.
http://www.YouTube.com/watch?v=31TbWMrTaFk
Before unplugging the printer, I remove the paper and toner and replace them after back on the powers of the printer.
In addition, I've seen a number of little problems like this problem by changing the configuration. How the printer is connected to the power supply? Is it connected directly to a wall jack or a limiter of surge, backup battery or power strip? Here's a post I did on the importance of this.
Let me know how it goes!
-
Laser Jet P1102w, need to factory reset
Hello. I have a Laser Jet P1102w, which I had set up to print wireless before and had difficulty. So in the integrated Web (EWS) of the printer server I set up with an IP address manually and subsequently he fiine. Then my ISP sent a different router that I have implemented. Unfortunately I did change the IP address manually on my printer to the integrated Web server, first of all. Oops!
In any case, I reinstalled the printer using the original HP DVD installation disc and also downloaded all updates firmware and HP Scan and print doctor. But it will not complete the wireless installation, I get an error message: "the printer has been able to connect to the network wireless using the wireless identification information. However, this computer is unable to communicate with the printer. Please check printer is on the same network as the computer and try again. »
I am able to print a page of Self Test/Configuration of the printer which shows the old manual IP address that I had put in the SAP. Of course this IP address will not bring up the SAP any longer so I can't change it to manual. Config page shows also that my printer is on the new network, as it's my computer. I think that printing held back by not being able to connect with the new router from this router is an IP address anywhere near manual that I put on the printer (if necessary).
I saw in the other responses to requests for similar information that I can get rid of the IP address manually, if I do a factory reset. Except that I do not know how. P1102 w doesn't have a 'control panel', just the wireless button and another "X" button - the one who insisted to get the Configuration Page. Press together does not reset anything.
Can you tell my how to do a reset to the factory settings? Or think of another way, I can get into EWS printer so I can fix this? Or another solution? Thank you!
Hi, me again. I managed to reset the printer by following these steps: 1. get off the printer. 2. press and hold pressed the buttons 'X' and wireless at the same time and then press the power button. 3. always held the X and the buttons wireless for a total of about 15 seconds to push at the start. Then released.
-
Color Laser Jet MFP M277dw Pro: frequently updated software
I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.
The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.
Sincere greetings
Arne H. Wilstrup
DenmarkAHWGreetings @ahw,
Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.
Given that the printer works, I would say to hide updates.
A poster tried to show or hide updates and it solved their problem.
- How to "hide update" during the Build 9926
- Need for the old Windows Update, not the new Windows Update
- Windows 10 - where is the 'hide or show updates' hidden feature
- How can I hide this update in Windows 10?
- How to hide Windows Update, Windows 10 build 10061?
You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.
If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!
-
I have a new Dell computer that runs on Microsoft windows 7 (64 bit) then my laser jet setting all in one that I wonder what download of HP to get hooked. I chose the largest size (I think that pl6?) -in any case, the printer works fine as well as the fax, but I can't scan. I see a place that maybe this laser 3050 part scan jet only works with a 32-bit system-Please HELP
Hi there bazilwood2;
Suggestion quick let;
Your HP 3050 laser jet is a commercial product. I suggest you post in the forum for HP Business Support for a better chance to find a quick solution.This is the page for your printer business support
http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en & CC = US & prodTypeId = 18972 & prodSeriesId = 1140783 & Task = & lang = to & CC = US
You will find the commercial Council of Laserjet here.
http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413
Hope you find the help you need;
RobertoR -
HP Laser Jet MFP M127fw Pro: Reduce the font size of iPad Air
I installed the HP ePrint app on my iPad Air and print by AirPrint on my Laser Jet Pro M127fw MFP printer. The font size is too large on the print job. How can I reduce the font size for my iPad Air printing?
A big thank you to ice at the service of the cloud, the problem has been completely resolved.
Thanks to the team -
laser jet mfp m127fn pro: need manual for laser jet pro mfp127fn
There was no selection board for printers. I need the manual for a laser jet mfp 127fn pro. whenever I click on this manual, on the website of hp, I get a blank screen with a tiny 'x' in a small circle at the top left of my screen. can someone tell me why I can't access the manual? I do not have a firewall.
I'm happy that using another browser worked for you.
-
Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode
I have Laser Jet Pro MFP M127FW. This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print. I can now no longer print documents, or send and receive faxes again. When I leave on this screen, the message disappears and comes back about a minute later for inactivity. I tried to unplug and plug the unit in the. I tried to use the switch to stop the machine. When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!
It is a real problem for me because I use the fax machine throughout the day! Can someone help me? Thank you so much in advance!
Hey @nhorn1115,
Welcome to the Forums of HP Support!
I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:
- Click on the configuration icon that looks like a key.
- Click on Service.
- Click Fax Service.
- Click clear saved faxes.
- Connect the cable of the fax.
Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
Maybe you are looking for
-
the last two days, I get an error message and Firefox does not open. I'm on 9.0
The last two days, Firefox will not load. I get an error screen. I'm on 9.0
-
HP OfficejetPro 8600 more: Scan works only from the PC, not the scanner
My scan of my Officejet Pro 8600 function will not work unless I have run a scan uning the software installed on the PC. When I try to scan from the control panel of the printer, I get a notice that says: "For scanning to a computer to make sure that
-
Failed to retrieve an e-mail that I spent hours!
I'm not sure what I did, but when I closed it to save it as a draft for tomorrow, it wasn't in my project or ANY folder. Not Spam or trash or anywhere. I'll try to understand where he is crazy!
-
Let go of the left mouse button
Hello I recently bought a HP Pavilion G6 1359ea about 6 months ago, and already the left button of the mouse of the laptop has become loose. It wobbles around when they are affected and it feels generally much more flexible than my right mouse button
-
Firewall Windows with advanced security on Windows 8, lack of predefined rules
I only noticed the problem initially because the network discovery is disabled, and no matter what I did I could not turn it back on. The necessary services were already running and I could navigate manually to other computers on the network, but the