LaserJet 1536dnf mfp: HP laserjet 1536dnf Windows 10 Scan mfp printer works not

Similar Questions

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• LaserJet 2605dn any size but letter print does not correctly

  We had our Laserjet 2605dn for a few years and had no problems printing using different paper sizes, using the XP computers.  However, when you print to the printer of 2605 to using a Windows 7 machine, the printer will not print correctly on letter-size paper.

  We try to print using a half-sheet letter or size of the statement (5.5 x 8.5).  We tried printing on 3 different machines to Windows 7, using Microsoft Word and also LibreOffice.  We choose the correct size paper into the printer Preferences dialog box and the print preview shows that it will print correctly.  However, when it prints, it is cropped and we get an error message printed on another sheet of paper: error PCL XL WARNING: IllegalMediaSize.

  We tried setting the custom paper size as the size of the statement in the dialog box printer, printing from the status bar, and also the manual feed.  We use the latest driver available through Windows Update and the HP Web site.

  Please notify.

  I ended up starting completely over.  First I have updated the firmware of the printer even if she showed it was common.  Then I uninstalled and reinstalled the printer on each computer, to have watch online for the driver.  Once it was full, I am able to print correctly on statement and letter-size paper.  Obviously the firmware or drivers have been corrupted or not really updated as indicated.  Thanks for your advice!

• HP Color LaserJet 2840 MFP Pr: I've upgraded to Windows 10 now the scanner on my HP Color LaserJet 2840 printer MFP printer does not work

  I upgraded to Windows 10, when I tried to use my scanner, I get the message - the printer does not see the PC.   Is there a way to get around this?

  Hello

  First of all, remember to install the communication driver USB LaserJet of HP (DOT4) below:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=445197&swLangOid=8&swEnvOid=4192

  Know that basic scanning capabilities only are offered through Windows Fax and Scan and only via a USB connection, not the network:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03501661

• HP LaserJet 1018 on Windows 7 / 32 bit: printer will not print

  My HP LaserJet 1018, running off my Acer laptop with Windows 7 Pro 32 bit, stopped working without known reason.

  I did the following to try to resolve the problem:

  * Check the cables and connections. These work, I think. Shoes printer green light.

  * I deleted the spoooler of local print.

  * I tried the troubleshooting feature.

  * I uninstalled and reinstalled the printer with the HP disk.

  * I rebooted the computer and the printer several times.

  * I have updated the latest version of the software on the HP site.

  None of the above seems to work.

  When I open a document and select print, it says that the printer is ready (Green Tick).

  However, it does not print even if the printer is connected and the green light on the printer itself is a steady green.

  When I check the icon of the printer on the bottom of my screen, it says that there are no print jobs in the queue.

  My last resort is now going through a new cable or call a computer scientist on the spot. I work for myself and really don't want to bear the cost.

  Any suggestions? Advice?

  Thank you!

  Thanks a lot 8lives for getting back to me.

  I managed to solve the problem in the last hour or two.

  That's what I did:

  * Cable USB purchased and attached

  * In the Windows devices and printers, I chose to remove the HP printer

  In the programs I uninstalled a PDF printer at random, I found

  In programs, I uninstalled the HP printer and enabled the computer restarts

  To restart the computer, the computer recognized and installed an HP printer and USB port without putting me the drive back in, and the printer worked.

  That may help a user in the future.

  But thanks again for your response, it is appreciated.

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Windows 7 Canon MP500 printer does not

  "Printer printer Windows 7 Canon MP 500 will not work, it comes up with the message" not of respondimg ", but the works of scanner and printer works when his hook

  at a top of the tower with Windows XP have tried updating drivers, but they want to charge $29.00 for drivers update programme.any solutions?

  You do not pay anyone for a driver update program.

  If win7 drivers/software are available they will be freely available on the support site for Canon, as the manufacturer of your hardware.

• LaserJet 1536dnf: unable to scan and print 2 documents through the ADF faces

  I'm currently scanning and printing, two documents faces through the ADF. I went through the controls on the printer to get the "copy" menu and select the duplex option, press ok.  Then looked for "type of copy. The only choice I have is 1 to 1 side and 1 or 2 sides. According to other posts, there is No '01:58 back!

  Hello

  It does support duplex scanning. You have to do manually

  Kind regards.

• "Laserjet 1022n Windows Update", causing problems printing: print jobs do not print

  Hello

  A few days ago I installed upgrading Windows Laserjet 1022n on my Windows 7 64 bit and since then I can not print a page normally: the page does not print. I use a TCP/IP network port.

  I made several attempts to resolve this problem:

  -uninstall the printer driver and install it again (I tried the latest version on the HP site and an older one that worked perfectly before)

  -update the firmware of the printer to the latest version on the HP site.

  When I put the printer in pause and start the print job, you can see in the list. Resumption of the printer, printing starts on the printer but you see that the job remains in the list, flashes again and again. The printer keeps printing the same page.

  I don't know what I can do to solve this problem. There is no way to uninstall the update of the HP Laserjet 1022n software because it does not appear in the list of installed programs (course list is also op updates from windows updates).

  I have same problem printing to the same printer from another PC Windows 7 (with the same windows update done)

  But I have no problem printing with my laptop on an other network printers.

  Is there someone who has the same problem and how to solve?

  Thank you for answer

  I found the solution on this site: http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing

  Just uncheck the chekbox "enable two-way communication" on the "Ports" tab of the properties of the printer and it works normally again!

• HP Laserjet 200 M276 MFP printer is not printing in color

  I'm trying to get my printer to print in color, but I only get out, not in the least blue colors to print.

  Any ideas what could be the cause?

  FYI: I use original HP toner

  Thank you

  Yvonne

  Welcome to the Forums of HP YHendrikx,

  By your post, I see that you have found only output blue.
  I can help you with this problem.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  I have provided a document through the steps to see if she will help solve this problem.

  Troubleshooting print quality problems.

  Please provide detailed results if you're still having problems.

  What are the results of the supplies status page and the print quality page?

  Good day!
  Thank you.

• LaserJet M1213nf MFP: Printer does not print the claim code more

  I use a chromebook, so I use my printer as a Google Cloudprinter. Usually, I'm able to get my printer using claim code that is printed in the Backgrounder (this information sheet is printer when I activate HP Webservices on the printer).

  For some reason, I seem to be impossible to activate the Web services successfully. I have a guest that webservices are enabled, but who is supposed to have printed information sheet no longer get printed. So, I don't know what is my claim code, and accordingly I seem not to be able to print more Google Cloudprint.

  I can connect to the site HPConnected, I can't add a printer because I don't know the claim code.

  Can you please let me know what I might hurt? How can I get the claim code?

  Thank you

  KNK

  Hello and welcome to the HP support community!

  Is your ChromeBook and printer using the same wireless network?  If so, have you tried to install the "HP Print application" of the Chrome Web store?

  Please see the document which contains the instructions for use of HP on a Chromebook print.

  http://support.HP.com/us-en/document/c04683559

  Here is the HP article on "How to get the claim code".

  WyreNut

• Windows 10 install doesn't work not after reboot (works fine until the PC is rebooted).

  It's bad enough. Upgrade to windows 10. Wanted to ensure that I started with a clean slate, so I have uninstalled FireFox, and then use the new edge of Windows browser to download the latest version of FireFox.

  He moved very well, remembers my bookmarks and settings, etc. Everything seems fine.

  But after a system restart, the FireFox icon on the desktop and the taskbar are just blank page icon, and when you try to run the program it says it cannot be found, or that I don't have permission to run it.

  Let's not get too hung up on how the bad error message is (go, Windows, who is?), the problem is that a program that worked very well until I rebooted now is not found or all of a sudden, I don't have permission to run it?

  The problem is if I try to boot from the desktop shortcut or if I go directly into C:\Program Files (x 86) \Mozilla Firefox and double-click on Firefox.exe.

  I tried the things:

  1. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that it was reported as a program that had been downloaded on the Internet and could be 'blocked '. So I checked the 'Unlock' button Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  2. check the properties of the installer to download stub (Firefox Setup Stub 40.0.3.exe). I noticed that there are two weird entries 'unknown user' in the settings of security with a sort of GUID. I removed those two. Did an uninstall, and then run Setup again. Everything is fine. Restart - same problem.

  3. do you have an uninstall, and then run the installer as administrator (after making the above changes). Everything is fine. Restart - same problem.

  I'm out of ideas.

  A diagnosis by a Microsoft technician during a support chat session!

  If you want to do a clean install of FireFox on your Windows machine after upgrading to Windows 10, but you had FireFox installed on Windows 7 or Windows 8 before the upgrade, you must uninstall the TWO FireFox and install the service of Maintenance of Mozilla before performing cleaning.

  If you uninstall FireFox but not the service of Maintenance of Mozilla, you will get the squirrels I described, where FireFox stops working after a reboot or a disconnection / connection.

  I think this is related to the BS that Microsoft introduced with Windows 10 where, after installing FIreFox, if you click on the button that says that you want FireFox to be your default browser is not only to persist this setting directly. Need you to the configuration screen of Windows 10 for default programs, which is not at all intuitive, especially those based on past behavior.

  I think that FireFox should put an explanatory text (on the page where you click on the button to make FireFox the default browser) which explains what Microsoft is up to.

  plan to install FireFox on Windows 10 machine

• Windows 7 Home Basic tone works not

  I bought a computer laptop sony vaio VPCEH26EN in 2011. The laptop comes with windows 7 Home Basic preinstalled. Recently, the system had not worked in the last week. I have left chance rather than format windows. The windows 7 Home basic has been downloaded from the internet. The key provided with the laptop does not work. In one place when I entered a character, the windows show invalid character error. Help, please

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  You can also activate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 Desktop Gadget calendar works not properly.

  Nice day

  Recently, my calendar from Win7 Gadget started acting strange.

  Normally so I it is the small size and showing the month calendar.

  

  Now what he does is to come with the display of the start date or after exiting the screen saver mode.

  

  I have to manually click it to return to month mode. It sticks only in this mode until the screen saver is used, then return to date.

  Is there maybe a registry setting or setting hidden control panel of the Windows Calendar gadget?

  Thoughts?

  Thanks for your time.

  Bill Wilson

  Thanks for choosing the Microsoft forums.

  I understand that view of Google gadgets desktop calendar changes automatically when you restart the computer, and after the resumption of Fund of screen saver mode.

  I would like to know some information about the problem so that we can help you further.

  1. you did it that any change of hardware or software before the show?

  I suggest you try the following steps:

  Method 1 Try the following steps in the article below.

  Gadgets Windows 7 can not work or be displayed properly

  http://support.Microsoft.com/kb/2515657/en-us

  Method 2 Try the gadgets to the default settings, and then check the issue.

  Windows 7 Gadgets do not work

  The Gadget to restore to the default settings.

  1. go to control panel and change the category view.

  2. Select appearance and personalization.

  3. then click on restore Gadgets installed with Windows desktop

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you.