HP Color LaserJet 2840 MFP Pr: I've upgraded to Windows 10 now the scanner on my HP Color LaserJet 2840 printer MFP printer does not work

I upgraded to Windows 10, when I tried to use my scanner, I get the message - the printer does not see the PC.   Is there a way to get around this?


First of all, remember to install the communication driver USB LaserJet of HP (DOT4) below:


Know that basic scanning capabilities only are offered through Windows Fax and Scan and only via a USB connection, not the network:


Tags: HP Printers

Similar Questions

  • Connected to my system HP-Laserjet-3050 printer does not work

    Printer connected to my HP-Laserjet-3050 system does not work. Please help me.


    Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

    And there are some troubleshooting steps for her there too.

    HP LaserJet 3050 all-in-One printer range

    Or you can also ask in the Forums of HP's Support.



    This can also help you:

    "Solve printer problems.


    "Solve printer problems.

    In the upper right corner, select your operating system from the menu drop-down.


    See you soon.

  • HP laserjet 1012 printer # does not work.

    I have connected a printer HP laserjet 1012 # to a laptop via the USB port, windows7.  The printer will not work.  Troubleshooting shows no driver.  Programs of research/AutoCorrect cannot find a driver.  How can I find and load a driver for this printer?

    Either install the driver from the disk that came with the printer, or go to the HP website and download the appropriate driver.

  • my hp laserjet 1100 printer does not control of the computer (Windows 7)

    my hp laserjet 1100 printer does not control computer but installed suucessfully

    Likewise, it cannot print a test page, but when I prees test page on the printer button, then it will be printed
    but nothing can be printed using computer, the window 7 bits.32
    When I click on any document, once it shows (a single document in quiew) but suddenly disappear
    Please help me, I also visited the website of hp several times


    Thank you for your response.

    Have you tried methods of resolution of the problems mentioned in the previous answer?

    Please update the State of the question, we will be happy to help you!

  • HP LaserJet 1015 printer will not work on Windows 8

    I have a HP LaserJet 1015 printer will not work.  Used with Windows 7 and it works very well, it will not work with Windows 8. Nothing came out.  I used all the devices, coil, etc that they had and was able to find.

    You can download the latest drivers from the following link for Windows 8:

    » Microsoft Windows 8 (32-bit)
    » Microsoft Windows 8 (64-bit)
  • HP color laser jet cm1312 mfp sharing does not work

    Hello, I have a problem.
    The this printer to connect to the server (windows 7 32 bit, latest driver).
    Other users (network) may not print, but after restart server, everything works...
    What is my problem? Help, please.


    To understand the issue correctly, try the following:

    1. If all the shared PC are not able to print, check if you are able to print from the server PC.

    If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

    2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

    3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

    4. If the driver on the server is offline, try now to turn off the SNMP state:

    From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

    See you soon,.


  • Update and now HP LaserJet 3390 printer will not work on XP

    I have an acer netbook.  Yesterday morning my printer (HP LaserJet 3390) worked and now it doesn't.  I made a stop down on my netbook and I remember the icon that tells me an update is available.  I am running Windows XP with IE 7.  I let him do the update and now printer is not working.  I am printing wireless via a router and a modem.  I reinstalled the printer and the driver have also downloaded from the HP website.  Any suggestions?

    How to uninstall it?


    With Windows XP, uninstall an update from start > settings > Control Panel > recent updates (check the "Show updates" box at the top of the page and select sort by name) should be at the bottom of the list. Right-click the update that you want to remove.

    * But *... It is not a good idea to install the security updates. You should try to solve the problem without uninstalling the updates.


  • Laser color CP1025nw spray: printer does not print

    The LaserJet CP1025nw color does not print when I click on 'print '.  The green light is, as if the printer is ready to print.  Ordinary laser printing paper is properly loaded in the tray.  The black toner is 70% and the three colors are all<10%.  i="" have="" set="" the="" printer="" to="">

    When I click on 'Print' there are no sounds of the printer, however, the green light remains on constantly.  It does not, Flash as it does when you're printing.

    This printer can print grayscale with empty color cartridges?  I am trying to print a b & w text.  If so, what should I do?

    Thanks for any idea that you can provide.


    Hi @JBC2,

    I see that you have problems printing and want to know if you can print grayscale if the colour toners are exhausted. I'd love to help you.

    If any toners and are completely exhausted, the printer will not continue to print until they were replaced.

    Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

    HP LaserJet Pro CP1025 and printers color CP1025nw - printing a Configuration Page.

    I have provided a few steps if the problem is software partner.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click Print & Scan.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +.  Then click the Add button.

    How is the printer connected? (USB, Ethernet, WiFi)

    If you appreciate my efforts, please click on the button below the thumbs up.

    If there is anything else I can help you, let me know. Thank you.

  • Windows Update 8.1 - now my LaserJet P1005 printer will not work (AGAIN!)

    I have a HP laserjet P1005 printer, whose yeaterday was work happliy in window 8. I downloaded 8.1 last night and the printer no longer works!

    With the window of printer status open (through the control panal windows) the details of the document are displayed briefly when you click on the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on a laptop without problem.

    Driver Hp downloads link it "seem" a driver for the 8.1 but I think it's only version 8.0 wrongly labeled.

    I am sick to death with HP. It took them more than 1 year to untangle a driver for Windows 8, and it blocks as soon as Microsoft tweek their BONES.

    Does anyone have any ideas how this can be solved? HP seem to be abandoned as a fundamental value customer - I have not buy one of their products again.

    Hi again - finally got it works!

    I downloaded the software from the link... again. Still no joy

    Remove the printer from the computer devices. Then downloaded the link... again. The computer had the printer appears as a device.


    I started again from scratch:

    Reinstalled the 'original' driver from the boot disk. (the driver from the link above must have still been present).

    Printer on stream.

    Very happy.

  • Windows 7 and HP LaserJet 5 p - old printer printer does not work with this new computer

    Just bought new PC and it has Windows 7.  Old HP LaserJet 5 p printer has always worked with last PC (XP).  This printer uses the parallel so purchased and plugged port with a parallel to USB printer cable.  Thought everything was cool when it seemed that the printer was recognized as "new device" but would not print my Word document.  Review of the Panel's PC recognized some other strange printer, so it has been deleted and I used the troubleshooter to find and download the old printer driver.  PC now shows the correct printer but my documents still won't print.  What can / should I do for these 2 working together?  Don't want to have to buy a new printer just to get something that works with 7.

    I was too frustrated. Finally, I solved the problem. I bought a parallel to USB cable head Gear. First attempts do not work. Unplug the printer from the computer. That removing all printers (some I just created trying). Make sure that you do not have the test pages in the queue (cancel all), otherwise impossible to remove printer. Also update windows drivers (to add the printer section). Turn off the computer. Connect printer USB available on the computer again. Turn on computer. And. You DID!

  • PDF/X1a with a logo that contains a colorized grayscale tiff print does not correctly

    I have a 3 logo colors: black, SPM 200U and PMS 1955U. The logo was built in Illustrator and I placed ontop of it grayscale tiff. Tiff grayscale is a dashed effect (points) that I have colorized to PMS 1955U in Illustrator, try it hidden on top of the logo and place it to multiply. In Illustrator, separations of good appearance and it prints fine when you print directly from illustrator.

    The problem is when I export to a PDF/x1a and try to print it, it does not print correctly. Printing from acrobat, it only presents a preview and print the PMS 1955U to the dotted line and black. Does not print the flat PMS 200U in the tiff format. I tried bitmapping file photoshop and make that the monochromatic stipple and still doesn't seem to work when you export to PDF and printing.

    Funny, that's when I do the whole process for the logo CMYK (not PMS), it prints fine to a PDF/x1a.

    Any ideas on how to get the logo to export and print correctly?

    Any help is very appreciated!

    Print quality using PDF version 1.4 that supports transparency while PDF/X-1a uses PDF version 1.3 which requires transparency to be flattened.

    For your problem, try to activate the overprint Preview in Acrobat preferences and see that you get the expected results, use the output in Acrobat Preview Panel to turn off individual plate to see if your missing PMS 200U is listed and flat color appears.

    If the foregoing is not works, please send me the files to reproduce this problem at my end, I will send my email in private message for you.


  • Manual duplex printing does not work for LaserJet 100 color MFP M175a


    Windows OS 8.1. Printer LaserJet 100 Color MFP M175a. driver version date 2011 Apr 13

    1. after the passage on the checkbox "Print on both sides (manually)" on the tab "Final" of the print properties dialog box and
    print, dialogue with the instruction how to turn paper appears. Then the printer should print the odd pages, stop for
    turn the paper, and then continue printing even pages on the back of sheets of paper. But my machine print
    all pages sequentually sequentially 1,2,3,... without breaks. What is TI - my bug error or possible in driver?

    2 functions of the DeviceCapabilities API of Windows with fwCapability = DC_DUPLEX for this printer returns 0 (duplexing
    impossible). This value for any other HP printers, even without duplex automatic, always equal to 1 unit.

    Hi @Up205,

    I see by your post that you are having problems manually double-sided printing. I can help you with this.

    The software for this model on the 8.1 for Windows is the Basic Solution software and the driver. This solution of basic software provides printing and scan feature only. You download and install the latest drivers?

    HP LaserJet Pro 100 color MFP M175nw drivers.

    Ensure that the bidirectional Support is enabled.

    Go to the type (menu tiles) in "devices and printers" screen, select settings, click on devices and printers, click with the right button on the printer, start left click on properties of the printer, on the Ports tab, put a check mark next to allow bidirectional support.

    You may have to restart the computer.

    If you need help, let me know.

    Good day!
    Thank you.

  • Color LaserJet CP1025nw: printer does not print after changing cartridges

    I just inserted cartridges M, Y and C in my printer.  They are official cartridges 126 a.  I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out).  I inserted one at a time, waiting after each insertion for the printer to run through its cycle.  Then I tried to print a color print job with no luck.  Then I tried to print a simple typed page - once again, no luck!

    Is it possible to print a test page?  I don't get any messages on my computer.  When I look at the print queue, it says "error printing".  Help, please!  Thank you.

    Note later: my mistake!  I turn on the blue light from the top; Once lit, the printer has been good to go.  Can tell you that I'm not very technologically savvy?

    So it works very well now?

  • HP Color LaserJet CP1215 printer does not install

    I have HPprinter1215 colors and cannot install my computer

    I have HPprinter1215 colors and cannot install my computer help kindly

    Have you tried the software, drivers and the printer utility of diagnosis available on the HP support site on this page?

    When installing drivers or software support for a device, it's always a good idea for the installation software right click and choose run as administrator. Acknowledge the UAC confirmation and provide credentials if requested.
  • LaserJet P1006: Printer does not print custom paper size (#6 3/4 envelope) correctly frome wordperfect

    I have an impossible to correctly print #6 3 / 4 envelope using WordPerfect X 7 (Version
    I use a HP LaserJet P1006, with 10 Windows HOME 64-64-bit. I manually added the #6 3 / 4 paper size envelope in the box size Options paper preferably print and the Print Server preference box. A test page will print correctly, just like a #10 envelope. At #6 3 / 4 print attempt, impressions as if an 8.5 x 11 sheet of paper, with addresses in the lower let of the leaf, properly oriented.

    The properties of the printer are as follows:
    IMF data format
    HP1006PrintPro print processor
    Windows x 64 operating system environment
    Name of driver HP LaserJetP1006
    Of Type Type3-user mode driver
    1.02.2680 driver version
    Additional printer driver files
    C:\windows\system32\spool\DRIVERS\x64\3\HP1006PP. DLL
    HP1006GC. DLL
    HP1006SU. ENT
    HP1006SU. WORM

    Although I could not use Notepad or WordPad, I can save the document in PDF format and print the envelope in PDF format from the Viewer.

    Thank you for your help.

Maybe you are looking for