LaserJet CP1525nw slow printing

Similar Questions

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• HP LaserJet CP1525nw color print quality problems

  I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

  Hello Graf213,

  There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

  Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

  Solving print quality problems

  Perform the steps, and I would like to know the results.

• HP color laserjet CP4525: HP color laserjet cp4525 slow printing

  I have a color laserjet CP4525 feel verry slowly after the replacement of the ITB.

  I compare specifications letter size is 42 ppm in black and white

  My printer give a 15 ppm +/-1 page, with diagnostic test tray 2 paper.

  I did a cold reset and check the type of paper and install firmware latess 7.220.2 July 31, 2015.

  After changing the magenta cartridge and once the ITB (under warranty), still the same problem.

  All the consumable are ok

  I did a printing b & w with MSword network, a single sentence on the letter format, it will print 15 ppm +/-1 page, no more.

  the perfect print quality, what may be the cause? DC / DC control? format?.

  I need help.

  Hello

  Do you think that the printer has impeded?  Or, is there a big gap between the ejected pages?  Have you checked the paper type in the bin?  Please make sure that the paper type is set to "Plain".

  After the closure of the status bar, the media sensor will detect the first fed leaves 5 and decide on the type of media.  Maybe your media are dirty or defective?  Try cleaning the sensor of media.

  You can disable the detection of media sensor, so if the above does not resolve issue you, please let me know.

  Kind regards

  Dave

  I work for HP

• My Laserjet CP1525nw disconnects frequently and does not print. What should I do to put online?

  I recently bought a LaserJet CP1525nw color printer. Firstly, I have established a wireless connection, via a router, with an Acer PC (Windows 7 Professional 64-bit operating system) using the CD of the printer by following the guided procedure and with attention to connect the USB cable when asked me to do. The printer worked very well. Then I installed the software in the CD for the printer on an Asus PC (operating system Windows 7 Professional 64 bit) who was in another room of my house and establishes a wireless connection between the Asus PC and printer. During the installation I was not asked to make the connection with the USB cable. I was able to print from the PC Acer or Asus PC regularly. Finally, I have a wireless printer on my laptop (operating system Linux Ubuntu 12.04 32 bit) using the HPLIP software. On the PC the LaserJet has been set as default printer. Printer LaserJet printed all three PC regularly. I left the printer. The next day, I try to print but I did not do it from a PC. The printer display showed 'Ready' and the correct printer (192.168.1.7) IP address. The blue led is on continuously. However open the control panel of the printer on the PC, I realized that the printer is offline. I tried to solve the problem to read the guide to the printer, but I wasn't able to find any suggestion. PC Acer and Asus have firewall Windows is activated and installed AVG antivirus. The netbook nothing. On the Acer PC, I uninstalled the printer and do a new installation using the CD for the printer. After this operation, I was still able to print from a PC, but the next day, the printer was offline again and was not able to print from a PC. Really, I cannot understand what is happening and should deeply grateful to receive any suggestions on your part. Many thanks in advance and best regards. sdrrmit

  This article should help to keep the Wi - Fi connection and solve problems in offline mode:
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• Printer driver LaserJet CP1525nw moved

  All of a sudden my Laserjet CP1525nw color printerdriver reinstall on a USB cable. Technical support is unable to find the problem. I also cleaned my registry and my hard drive but nothing helped. I rarely meet driver problems and have never had a printer driver install fail. Can anyone provide any indication this problem?

  I'm under Win. 7 (32-bit) on a desktop computer.

  Hi Ron,

  You are right, it would be something in the operating system at the origin of the problem. Unfortunately I can't help you with issues related to your operating system. The only thing I can say is that you back up your data on the hard drive and then reload your OS. I'm glad to hear that you were able to successfully install the printer on your computer and the other computer. Have a wonderful weekend.

• Color laserjet CP1525nw will not print in color

  I installed the PCL6 and PostScript drivers on my Surface Pro 3 to print to my LaserJet CP1525nw color.  The printer is connected to my router.  The printer prints, but only in shades of gray.  What can I do to be able to print in color and continue to print through my router?

  My printer is connected via USB. I installed the full version of the software, and everything works now. Thank you!

• LaserJet CP1525nw said "Low memory" and do not print

  I can't get my HP LaserJet BP1525nw of printing.  It says "low memory".  Then, when I click on the OK button then it prints a page that says PCL XL Error and error: InsufficientMemory.

  How do I clear the memory?  And if I do not delete how can I keep my connection Wireless for it?

  Help, please!

  CarylAug,

  The printer memory is full, which explains why you receive this error message. Try changing your printer and turn it back on. This should erase the memory of the printer. When you send print jobs to the printer, try to send the into small pieces. Each power cycle so ofter, your printer and clear the memory and your shouldn't have this problem in the future.

  Memory is low Press [OK]

  The memory of the product is almost full.

  Press OK to finish the job, or press X to cancel the job. Divide the work in jobs that contain fewer pages.

• LaserJet CP1525nw: CP1525nw color printer leaves magenta spots to the left of each page

  My CP1525nw color printer leaves the magenta veins on the left side of each page to print.  I tried to clean the printer using the clean function built into many times I removed and cleaned the amgenta cartridge, and I also deleted every piece of software my machine HP and reinstalled the drivers for this printer.  Magenta strekas are still there. They are always on the left side of the page.

  someone had this problem a few years ago and an answering machine seems to have responded with a link to a wrong page

  Is there a solution or a work link pleaase?

  Well, it's obvious that you're upset.  I'd be for.  To make this real simple.  You have a bad magenta toner cartridge. Cleaning will not work because the wiper inside the toner cartridge blade went probably bad toner causing the flight of this side and causing the problem.  Replace the magenta toner with a new toner hp original and all should be good.

• Enable Web Services on HP LaserJet CP1525nw

  We are trying to install web print on HP LaserJet CP1525nw service.

  This is a printer over the network from a server windows server 2008 R2 for Windows 7 x 64 machines

  It is connected to a network wired and all (printing etc.) works execpt WebService.

  We manually set DNS 8.8.8.8 and 8.8.4.4 secondary and restarted dns

  We also have white listed IP of the printer on the firewall, so it has access to the internet through the network without be filtered. (Did anyone know what are the IP address for the web services on the HP circuit?)

  When access us the printer using its IP address and go to the configuration of Web Services and click on 'Activate' it is on the screen for about 2 minutes and does not

  "Connection check connection error".

  Any advice is much appreicated.

  Success his works now!

• How do we install the PDL_Common he asks when installing a Laserjet CP1525n color printer

  Hello

  During the installation process, I get a pop-up asking for the CD with the PDL_Common.  This error occurs during the installation of the printer driver.  I don't have a disk for it, what can I do?

  Hi Lisam123

  I understand that you get the PDL_Common error during installation.

  When you get the error try pointing to the c:, windows, program files or program files x 86, then hp, laserjet to see if it is listed.

  Try to run the HP printer install wizard for Windows. (Win7 and Win8 only)

  Here's a url for your Laserjet cp1525nw downloading. Just select the operating system.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4052980&LC=en&cc=us&DLC=en&lang=en&cc=us

  Please provide the following information so that I can better help you.

  Which driver are you setup because you do not have the cd?

  What operating system do you use? (winxp, win7, win8, win8.1)

  How is the printer connected? (usb, ethernet, wifi)

• Change the language on Laserjet CP1525nw

  My tongue is currently set to Czech and I don't know how to change the language to English on my LaserJet CP1525nw settings

  Hello

  Babou click here 2 - 3 times on the Cancel button to ensure that the printer will display its main screen.

  Click the arrow to the right 3 times, and then click the OK button twice , and the list of languages should appear on the screen.

  Kind regards

  Shlomi

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?