LaserJet CP6015dn made noise every 30 seconds

Similar Questions

• Grinding noise every 3 seconds on the left side of my laptop

  Hello, I just bought a HP touchsmart pavilion N229tx last week and I noticed now that it has started creating noises grinding every 3 seconds every time my laptop is turned on and running. The noise comes close the wind where the air is supposed to come out.

  What should I do with this problem?

  Also when I bought the laptop and it opened the first time that I continue to have the fan error when starting, saying that he had found that the fan is not operational I think you're mistake 90 b. This product whenever I turn on the laptop.

  Try a hard reset as follows:
  
  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button
  
  Who can fix the error message.

  To solve the noise that could be linked to the fan, you will need to contact HP warranty service. HP Service centre may replace the CPU fan.

  It is always useful to include the number of the full product. You left out the first two digits and the hyphen.

• deaf new laserjet 1102w made noise when printing

  I just bought a laserjet 1102w to replace an old laserjet 1002. The fact 1102w one muffled loud noise every time it well a piece of paper causing the Office to shake.  Is this normal with this printer now or make me a defective printer?

  Hey Stafic,

  I would like to go ahead and launch HP Hardware Diagnostic Utility to see if it is able to determine if there are hardware problems. You can download the tool here: HP Hardware Diagnostic Utility

  Run the tool and post back with updates.

  Thank you

  Sean

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Distortion of the sound every 20 seconds on Satellite C

  When listening to audio with and without a helmet, every 20 seconds or so the output sound is deformed for several seconds and in some cases this sound distortion also causes computer to freeze completely display.

  My PC is a Toshiba Satellite series C running Windows 7.

  Any suggestions please?

  Please be so kind and post some info about this noise problem.
  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed this problem on the first day?
  Have you noticed this problem whenever you hear the music and watch movies using different actors?
  With other words, it's a kind of general problem on your laptop?

  When this happens you noticed most high HDD activity in the background (System analysis, installation of updates or something similar)?

• Satellite A135-S4666 - cooling fan turns on and turns off every 20 seconds

  Hello

  I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.
  It is a little annoying and it disctracts me of what I'm doing... is there a solution?

  Thank you very much.

  Hi Martin,

  This behavior is perfectly normal and nothing to worry about. If you find the noise irritating cooling fans you are likely to change their behavior by using the utility of Toshiba power where you should be able to set the cooling mode to run more quietly. I think trhe default is to allow the CPU to run at full speed, which will, of course, the fans turn every few seconds, but by reducing the speed of the CPU, the heat produced will be lower and therefore the fans will run less often.

  Kind regards

• system crashes every 2 seconds

  Hello people!

  I have a laptop G62 with the 64 bit version of windows 7, I have almost 4 years

  About 3 days ago, I ran a few youtube videos, the system started to freeze (video + sound) every 2 seconds!

  I turned it off and went to bed, the next morning, I turned it, went to the home page! and he showed me the desktop but nothing opens, not applications without the browser, when I opened the Task Manager, it showed the programs that I clicked with a * 32 at the end!

  in about 5 min later explorer.exe crashes and I had to stop it.

  what I tried:

  memory test: test the HARD disc, freezes in almost 50%

  factory reset: the partition is not found

  Scan of the system with antivirus: freezes in the Middle!

  software to clean registry
  
  logged in to windows, normal start, after 6-8 minutes it starts to freez every 2 seconds, and every two seconds, I hear a noise in the HARD disk like crack! and it happens every 2 seconds
  
  my activities:
  performance of Flight simulator X
  turn 3d flash games
  movies and videos youtube

  system:

  Intel Core i3 2.40 GHZ (4CPUs)
  Home Edition of Windows 7 64 bit
  
  Note: I have been using safe mode with network for over 2 weeks now, is not freez in this mode!
  I do not have the CD repaired

  Sounds like the hard drive is failing fast and will need to be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get one of at least equal quality of the original in order to use recovery disks to install Windows & programs. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• Every 5 seconds there is a short click, done grating burst from somewhere in the main Board or the chip. All PC components vibrate for half a second.

  My PC components vibrate, and then click (grinding noise). It seems to be a kind of discharge of energy. I tried to remove the A drive (which vibrated more)... continuation of the click. I put it in a disk hard nine... more vibrate. I ran the computer in Mode safe and this is... NO NOISE! What is going on?
  What is a 'switching due to inductance noise"? Is - this "deferred procedure calls"?
  It's obviously some sort of condition of signs, not a mechanical condition.
  Why every 5 seconds?
  Any suggestions are appreciated.
  (BTW... Yes, I already dusted off.)

  Hello Computrified,

  Thank you for your message.  You can review your fans.  Since these are the only parties 'move' in your computer, it is possible that one could go bad or become loose.  Please let us know the result.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Spike in ping every 60 seconds, wmp54g

  Vista ultimate x 64

  WRT120N router

  Wmp54g V4 adapter

  All by sucking my router, 192.168.1.1 I noticed every 60 seconds, the ping to dope for about 1000 Ms. tested on my laptop, and it didn't happen. When this happen the packet loss on the ts2 and TS3 Server I use jumps to 50%

  Have not yet tried a lot, locked the router mode G, tried the channels 1, 6 and 11. Tried with filtering mac on and out, swell like wpa security. Tested also with SPI firewall turned on and off.

  I'm about 15 feet above my router, 1 wall with a constant of 5/5 bars. The laptop is about 20-25 feet away.

  I also noticed that this adapter refuses to download at a faster rate that about 400 kB/s, even the wusb100 Wireless USB adapter I was using yesterday would go at least 650.

  Replaced the USB with the pci I had problems of connections. Constant disconnects, everything that involves connecting to multiple computers, it made disconnect.

  Really, the points don't bother me as much as the slow download rate.

  In fact, using other drivers linksys garbage drivers worked fine. Switched on the drivers Ralink, and his work very well now.

  For anyone wondering, it's the pilot "PCI/mPCI/CB (RT256x/RT266x).

• computer beep will sound every 3 seconds and does not stop while the computer is on... why not? How to stop it? __

  My new Dell Inspiron 1545 beeps (like a USB stick is plugged or unplugged) every 3 seconds, without judgment, without doing me anything to provoke. I turned the computer off and back on several times, but the noise persists.

  Why this is happening? How to stop (without just turning off the sound)?

  Yessim

  http://support.Dell.com/

  As this is a brand new computer, it is under warranty.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  

  http://en.community.Dell.com/support-forums/default.aspx

  Dell Support Forums

  Please contact Dell at the link above.

  And the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 - get a ding dong sound every few seconds

  I am running windows 7. I get a constant ding dong upward, then ding dong down every few seconds

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  As described in the question, I understand that you sound every few seconds on the Windows 7 computer. I will certainly help you get this fixed number.

  I would be grateful if you could help me with more information:

  Do no pop up also when this noise appears?

  This problem may occur because of any USB device connected to your computer. I suggest you to disconnect all the USB devices on your computer and check to see if you still get the sound.

  Connect the devices once you diagnose if the noise comes up or not after the disconnection of the devices and follow the procedure below.

  Run the hardware and devices Troubleshooter

  Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

  1. open Control Panel

  2. click Troubleshooting and select the option to display all on the left pane.

  3. click Troubleshooting of hardware and devices and follow the prompts.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• No power and flashes of light every ten seconds

  I have a HP e92910f. The power comes from start to not work. at the back, the green light is on. the power light flashes about every 10 seconds. Whenever the light the fan made a little movement

  Mrvulcan, welcome to the forum.

  I doubt that the power supply (PSU) did not.  Here is a guide to help you troubleshoot it:

  http://support.HP.com/us-en/document/bph06788

  If this does not resolve the problem, here is a guide to help you that you determine what means the flashing of the LED:

  http://support.HP.com/us-en/document/c01732674

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• audio interruptions every 30 seconds on WAV recording AND playback - computer laptop Dell 1545, Windows 7

  Recently (the last couple of weeks), my laptop Dell 1545 with Windows 7 started having a problem: when I record or reading any WAV file (or a file MPG or WMV video too by the way) with any application (I tried several), there is a stuttering or interruption every 30 seconds like clockwork.  I have tried everything and can't seem to fix it.  During playback, it causes a split second buzz or silent, on the record, missing just a fraction of a second of audio, leaving a 'leap' in the best stuff WAV audio recording.  The only changes that I made in the system in the past month have been a few updates to Windows 7.  It ruins any recording or playback, I try to do, and is very frustrating.  It does the same thing on the files that are years old and new files (reading).  If I burn these files to a CD or DVD, they play very well in the CD drive or DVD, is not a problem in the files (except those currently record during breaks).

  What I tried:

  Much, restart several times.

  Reinstall the driver for my audio interface, even if she did the same on the native sound card too.

  Download the new driver from the audio interface and install it.

  Back to the old driver, then again to the new.

  Tried to record from multiple sources, ditto.

  I tried recording through the native as well as audio interface sound card.

  Deleted 40 GB from my hard drive.

  Defragged my hard drive

  Off my anti-virus program

  Close all other programs other than playback of the file.

  All USB disconnected elements.

  Tried to plugged the charger and entirely on batteries.

  RAM tested.

  Tested CPU.

  Nothing has worked so far.

  Any ideas?

  DWasnich: I had the same problem as you yesterday after restoring my Dell Inspiron 1545 to factory image. Through process of elimination (as mentioned Gokul T) I was able to determine that one of the services was originally the audio and video to jump to 30-second intervals. I disabled the 'Intel Matrix Storage Monitor' service and solved the problem. Why this service was installed and running after the factory reload is confusing. This is one portable hard drive without needing a RAID System. I hope this has solved your problem too! Joe

• Preloader which modifies the external SWF files every 5 seconds

  Hello
  
  I made a web banner in flash that loads an external swf and another external swf changes after 5 seconds. The banner have a preloader, but the problem becomes when you load the first time. As sovereign wealth funds are not cached in the cache of the browser and yet, time 5 seconds start counting from the preloader, and when the external swf file, shows only 1 second rest and it is replaced by another. There is a way to 'freeze' the time for each external swf until it loads completely?
  
  The code that loads SWFs every 5 seconds (this code is placed in a layer of action):
  
  start of the code:
  
  var intervalId: number;
  var: number = 0;
  var maxCount:Number = 23;
  var duration: number = 0;
  var banners: Array = new Array)
  "abatrade.swf,"
  "bancobrasil.swf,"
  "caparao.swf,"
  "cedro.swf,"
  "cesama.swf,"
  "copasa.swf,"
  "damatta.swf,"
  "emtel.swf,"
  "engedrain.swf,"
  "extel.swf,"
  "feedback.swf,"
  "iti.swf,"
  "intermedium.swf,"
  "magnesita.swf,"
  "maquenge.swf,"
  "maxxdata.swf,"
  "orteng.swf,"
  "paiva.swf,"
  "paraibuna.swf,"
  "paraopeba.swf,"
  "sabesp.swf,"
  "serpro.swf,"
  "soll.swf,"
  'thawte.swf '.
  );
  
  function executeCallback(param:String) {}
  var duration: number = 5000;
  loadMovie (banners [count], loadmovie_mc);
  loadmovie_mc._x = 0;
  loadmovie_mc._y = 0;
  
  clearInterval (intervalId);
  if(Count < maxCount) {}
  Count ++;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  }
  else {}
  Count = 0;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  }
  }
  
  If (intervalId! = null) {}
  clearInterval (intervalId);
  }
  
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  
  end of the code
  ----------------------------------------
  
  And the code to the preloader (this code I place in the movieclip that loads external SWF files):
  
  start of the code:
  
  {onClipEvent (enterFrame)}
  var gtT:Number = this.getBytesTotal ();
  var gtL:Number = this.getBytesLoaded ();
  var gtP:Number = int ((gtL/gtT) * 100);
  If (TWG > gtL) {}
  This ._alpha = 0;
  _root. Loader._alpha = 100;
  _root. Loader.bar._width = gtP;
  clearInterval (intervalId);
  } else {}
  This ._alpha = 100;
  _root. Loader._alpha = 0;
  intervalId = setInterval (Thi, "executeCallback", duration, banners [count]);
  delete onEnterFrame;
  }
  }
  
  end of the code
  
  Note that I tried to freeze the time using a clearInterval does in the second code, but he simply doesn't work...
  
  Any ideas? Thank you
  
  Edson

  Here's the correct code kglad send me. Thank you very much!

• Running for some time, firefox 'hangs' every 7 seconds 3 seconds, typing, scrolling, navigate... all functions to follow the cycle of 7 seconds break. Why?

  This problem does not appear to exist until "free" download of Windows 10 installed. I've waited too long to return to 8.1, now stuck with the $ @# @ 10 software. Using a FF browser "synchronized" to work (win 7) I have no problems with the cyclical lag during typing, scrolling, etc. Be totally irritated with win 10, I tried once again to try Linux (Mint) and noticed that the SHIFT does not seem to be there when you use FF in Linux, which has installed from their 'package '. This shift occurs every 7 seconds to 3 seconds of insensitive cursor, typing keystrokes, scrolling action... whatever. Suspecting some 'supplement' to go funky, I have removed ALL addons... no improvement. This forum works on 64-bit, 2 gig memory, relatively new machine that had no question to win 10.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select the Options under Windows or Preferences on Mac or Linux.

  2. Select the Advanced Panel, then on the general tab.
  3. Uncheck the use hardware acceleration when available.
  4. Restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  Thank you.