LaserJet P2055dn: HP LaserJet P2055dn - duplex printing problem

Similar Questions

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• LaserJet P1006 duplex printing manual

  I have a problem with manual duplex printing on the Laserjet P1006 running Windows Vista. I have multiple accounts configured in Windows. When I print using the account that installed the printer, everything works fine. When I try to print to another account, the prompt that asks you to click continue to print the 2nd side of the paper just has a button closure instead of a button to continue on the bottom. To confirm the problem, I uninstalled the printer and then reinstalled on another user account. Now, my account not manual duplex, but the other cannot. Does anyone have a solution to this problem?

  Ah ha! I have a better workaround (at least for my situation; if all goes well it will help others too)

  At first, after reviewing the issue of original posters it dawned on me that if I could just install the driver as a normal user (not Admin) then it should work as long as I'm logged in as a normal user (I'm the only user on this computer). But unfortunately I don't have the ability to install unless I run as administrator, so no hope there.

  So here's the real solution (for XP users, at least): after installing the driver as an administrator, you must open the "Printers and faxes" window as an administrator. (There are a number of ways to do this. One way is to run Windows Explorer as administrator and then go to the desktop and on the side panel, there should be a link to the control panel. Open and then click on printers and faxes.)

  Now select the printer, right click and choose Properties, then select the Security tab. Under "group or user names", select everyone. In the permissions window, check all the buttons 'Allow', then press on apply. (While you're here, you might also click the "Device settings" tab and confirm that the checkbox "allow manual Duplexing" is checked.)

  For me, which did the trick.

  The advantage is that, before I was also not able to save any 'Print task Quick Sets' in printing preferences of dialogue (unless I was running as an administrator), but now I'm able to do the same.

  Message edited by kmote 03/11/2009 10:09

• HP LaserJet 1536dnf Mfp: HP Laserjet 1536dnf MFP - print problem printer

  My office has a printer HP LaserJet 1536dnf MFP printer and copy machine and it's only last month a year.  This morning the computer was printing and copy fine, then in the middle of a print job 21 page pages begins to show the 4 brands of blackshadow - like on the right side of the page (starting at the top and down to about 4 inches before printing the next black shadow).  Sometimes copying and printing.  I tried to reset the printer by unplugging the power for 10 minutes.  I tried to clean it with cleaning setting.  So far, nothing has worked.

  Greetings;

  If you could post a small picture of the question I might better be able to determine the cause.

  Are marks on the page dashes in the media?

  Brands repeat down the page in a spaced identical schema?

  The issue might have to do with the toner drum, but could be a piece of paper stuck on the fuser unit.

  Unlike the intervention of Anonymous_Fan this is not a model of injket and has no heads printing or alignment of the calibrations.

  I followed this thread and waiting for your response.

  Kind regards

  Jaclyn

• HP LaserJet p2035n: LaserJet p2035n Duplex printing in Windows 7 x 64 error

  I added a Windows 7 x 64 computer to the home network. Duplex printing works, but the second manual side does not invert the order of the pages, resulting in a controlled print job. In XP, of course, there was an option to reverse the order of pages when you print the even pages. Any ideas how to make it works with the Windows 7 printer driver?

  Well, I finally thought to it after trying various options. The solution is completely counterintuitive, is not yet documented anywhere on Earth, but it works. Here's how:

  Select "Print on both sides, flip on short edge pages."

  Press 'print '.

  Once the print job is done on the first side, the troubled yellow icon at the top of the printer starts flashing.

  Remove the printed pages of the delivery tray and place head downstairs, side white upward, in the manual feeder.

  Press the button on top of the printer paper.

  Second side will now display in the correct order.

  Thank you, HP, whereby we understand such things on our own.

• 6700 duplex printing problem

  I've just set up the hp officejet 6700 premuim for windows 7. For several days, it was two-sided printing. Today, the drop down menu no longer has optionally double-sided printing. I checked my setup and automatic duplex printing unit shows installed. I don't have any changes that I remember. How should I do?

  ERC

  Hi @erc002 and welcome to the Forums of HP!

  I see you are having problems printing duplex.  I would like to help.

  Is this problem occurring n a specific program, or occur in multiple ones?

  I recommend to download and run the HP print and Scan Doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Office Jet 6000 wireless duplex printing problem

  (Note: all printers updates have been made)

  Printer works great as duplex, however:

  I try to Print Duplex (1/2 letter size pages - portrait booklet with the paper size of 8.5 "x 5.5" ).

  When I go to print I select the paper size for brochure (predefined size as shown above), however deselects the duplex option and manual is the only option.

  If I reselect Duplex then the size of the paper goes back to 8 1/2 "x 11".

  It's normal for duplex printing on non-standard paper?

  I know I can do it manually by printing one side at the time, but it defeats the purpose.

  Thanks in advance for any answers/ideas.

  blperry2001, I responded earlier to a similar post here (http://goo.gl/tcbiM) to explain why some paper sizes are not able to print.

  A list of most of the formats accepted for our printers can be found here (http://goo.gl/Bwv10), although according to their use some sizes may not be supported.

  I hope this helps!

• HP Laserjet Pro 400: Printing problems HP Laserjet Pro 400

  I installed a new toner cartridge.  It worked very well for a few days and now, on the side of the page it prints, it leaves a trail of ink through the page also spaced points.  I tried the cleaning function and print out a few pages to see if it goes away but neither have worked.  Are there more options or insight into what is happening?

  Christina

  The new cartridge is probably defective.  To test put a sheet of paper on the manual fold down tray on the front and go to the reports menu and print a configuration page.  When the rear edge of the paper into the printer, quickly press the button to open the toner door to stop printing.  Remove the toner cartridge and look at the picture below.  If the points are present the toner cartridge is the problem and should be returned to the place of purchase for refund or Exchange.

• Printing with color HP LaserJet 2840 PCL6 printer problem

  I installed the printer on another computer. When I try to print, every time I need to reset the printer before it prints a document that is made by the new installed MS Office 2010. What to do to be able to print at a time?

  This looks like a problem with the printer itself.  Have you checked for firmware later?

• Multifunction color HP LaserJet Pro 200: printing problems - Full black pages!

  My printer has suddenly started printing totally black pages - new black toner cartridge a month ago.

  Do you still have the old toner cartridge. It could be the toner so if you can try another good cartridge. I also have to remove and reinstall the black toner cartridge.

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• HP ENVY 100 D410 CN517A Duplex printing problem

  My printer jams every time I try to print on both sides of the paper (as is pull the inner paper after printing the first side). It's the same kind of paper, I am using since I bought it, and it used to work before (so no, this isn't a problem with the paper). The only thing that has changed recently is that I changed the ink cartridges, but I was able to do some work before duplex he screwed up. I am on Windows 7 by the way. Any suggestion as to what is wrong?

  KeyllyNYC said it is an instrument in the service of the printer for "cleaning of the paper source.

  Go to the configuration Menu (it looks like a key), click on 'Tools' and the fourth option should be "own paper source."

  If that doesn't fix things, you can manually clean the rollers inside the machine. Simply open the lid of the scanner, then access of transport cover. In the back, there is a removable access door roller, pull it out. Then with a damp cloth wipe Lint (like a coffee filter or a microfibre cloth) large rubber rolls and let them dry.

  

  When they are dry and closes the printer, try printing again.

  I hope this helps!

• HP Deskjet 1510: Duplex printing problem - an odd number of pages only

  If I print something with 8 or 12 pages or whatever (numbers) everything works perfectly.

  For odd numbers of 9 or 15, or whether, it becomes a bit like a random number generator. Page 1 is ok, but the rear where need to go 2 can be empty, could be page 4. The last page prints on the last page which must be empty.

  If I have a 9 page document that I can choose pages 1-8 and then separately just print 9 and it works well.

  Hey @terry6,

  I see you have some problems with the printing of your Windows Vista computer to your Deskjet 1510. Now, a printer only prints what the computer told him to print, but I can help you find the problem on your PC.
   
  Here's what we will do:

  1. Turn the printer off.
  2. Close all programs on your PC.
  3. Open your control panel, and then printers and faxes.
  4. Right click on the image to the printer.
  5. Click on remove the instrument.
  6. Repeat if you have copies of your Deskjet 1510 listed.
  7. Turn on the printer.
  8. If the printer does not appear in this window after you turn on the printer and wait a few minutes and then click Add a printer up.
  9. Follow the prompts to add the printer to the back.
  10. Try to print again.

  This should fix your problem with printing pages in the right order. If it does not then try the following:

  1. Uninstall and reinstall the printer.
  2. Uninstall and reinstall the software, you are printing from.
  3. Try another program.

  If he let so please other users know by clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a great weekend!

• Dell h625cdw duplex printing problem

  I've just set up a dell MFP on a home network h625cdw.  Print orders of MS Office programs on my desktop (a XPS 8700 win 10 family) do not recognize this as a double-sided printer and I can print only two faces manually.  Print orders of MS Office programs on my laptop (running Win 10 Pro Surface book) recognize the ability of the printer duplex.  I tried to uninstall the printer and reinstall it on my desktop computer, but it is still not recognized as a double-sided printer.  Another feature sounds great.  Any suggestions?

  Can you go into the properties of the printer and check the driver version and compare between your desktop and laptop configs?

• OfficeJet Pro 8100 Duplex printing problem

  When I try to print double-sided, the second page prints upside down.  I tried to fix with the changes made to the different settings, but have not been able to find a way to fix this problem.  Any help would be appreciated.

  I use Windows 7 and the printer is installed on a wireless network.

  Hello

  In the control panel or the application being used, open the dialog box Preferences of the hologram.

  Change the printing on the both sides option return long edges.

  If that is already selected change back on the short edge.

  This value must be the cause of this problem.

  Please let me know of any problems,

  Shlomi