LaserJet pro 100 cannot connect wireless

Similar Questions

• OfficeJet Pro 8610 cannot connect wireless

  I have an Officejet Pro 8610 (CN41JB30XY)

  IM using a laptop from Samsung (NP510RSE) running Windows 8.1 x 64

  The printer sets up a operates fine USB

  When I run the installation of the software and that you are trying to set up a Wi - Fi connection it fails

  There is no error message is not very well the printer

  Have disabled Norton and the Firewall window - no help

  Started in safe mode with network - no help

  Ran msconfig and doesn't make a start limited - no help

  I'm on a private infrastructure network and connect to the IP 192.168.0.149

  The guys that I beat my brain for a week, your help will be aprecitated

  Note: I do not have a router am on a WIFI network

  Hi @Phil_Ramsey,.

  By your post, I see that you cannot set up the printer on the wireless network. I can help you with this.

  Please provide more information on the configuration of your network. Given that you do not use a router.

  In the meantime, follow the steps described in this document for the wireless printing Center.

  Select your printer never worked on the network.

  When you run the Wireless Setup Wizard on the printer is not automatically find the network and automatically provide a static IP address or will you set a static IP address? (which could be the problem)

  You can test the printer?

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run,.

  Make sure they are on the same subnet mask.

  Type cmd and then type ipconfig.
  Check the IP address of the computer and the subnet mask.
  Now, check the IP address of the printer.
  Do the first 3 sets of numbers match?

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

   

• The HP Laserjet Pro 100 Color MFP 175nw scanning

  Does anyone know if HP Laserjet Pro 100 Color MFP 175nw requires the Ethernet connection to scan documents or WiFi will be sufficient?

  Hello

  The product of its capacity to provide by any method of connection took in charge.

  So you can scan via USB, Ethernet or wireless connection.

  Concerning

  Shlomi

• HP LaserJet Pro 100 color MFP: install the driver for color laserjet MFP m175a pro 100 failed at about 83%

  When I connected the printer to the system recognizes it as a cd player.

  I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg.

  UAC is disabled and .net framework advanced fetures is not installed.

  I see an error in the event viewer, without and the error number:

  Message: The object of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
  Source: mscorlib

  Hey @yechiel-adar,.

  Welcome to the Forums of HP Support!

  I understand that your color HP LaserJet Pro 100 M175a multifunction fails to install on your computer Windows 8.1 as the computer recognizes your printer as a CD drive and the installation fails at 83%. I would like to help you to solve this problem today. To be honest, it sounds like there is a conflict between your computer and the HP Smart Install feature. Smart Install is a feature that has been programmed into the new models of Laserjet. It allows you to simply plug a USB cable and the installation files will load on your computer for you for faster and easier installation. However, on some computers systems rather find recognizing printers printers rather than software CDs. In this case, the installation never ends with success that your computer never actually detects the Laserjet Printer. That being said, I'll guide you through a few steps below to resolve this issue.

  Please, disconnect the USB cable from your computer before you continue.

  Step 1: Disable Smart Install:

  1. On the front panel of your printer, select the button Setup (key)
  2. Right arrow to the Service menu , and then select OK
  3. Right arrow key for Smart Install and select OK
  4. Please turn OFF Smart Install

  Once Smart Install turned offshore, please proceed to the next step.

  Step 2: Uninstall the drivers:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with. Even if your ever successful installation there is a chance that a part of the software package and the pilot has made its way on your computer. To ensure that there are no problems when reinstall us your printer, I'll first you remove all traces of your printer from your computer.

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type programs and features. Click on programs and features to run
  3. In the window programs and features will populate a list of the programs installed on your computer. Please scroll down and look for your HP Laserjet. If you see the Laserjet listed please select it and choose Uninstall
  4. Follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 3: Delete the temporary files:

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen please type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. R ight, click on the recycling bin on your desktop and select empty recycling bin

  Step 4: Install the device:

  1. Please click here to download and run the installer full feature software and driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your HP Laserjet Printer
  3. Do not connect the USB cable until the installation window invites you to

  Once the installation is completed successfully, please test print to confirm that your product works as normal.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Can I disable wi - fi on a HP LaserJet Pro 100 MFP M177fw color. My place of work does not.

  My workplace allows no wi - fi to be active on the printers. Features wi - fi color HP LaserJet Pro 100 MFP M177fw can be disabled?

  Hi ltyarr,

  I understand what you want to do but you can just turn off the wireless radio, or you can install a password for the network, and then disable the wireless radio.

  I have provided the manual for the Laserjet Pro 100 color MFP M177fw. The specialized section

  Safety features of the product to the 56 page allows you to configure the wireless and password protect the network. You can disable the wireless radio and no one could access or set up a network without password.

  MULTIFUNCTION COLOR LASERJET PRO.

  Good day.

• new printer not found "LaserJet Pro 100 color MFP M175a" "scan."

  Hello

  I just installed and tested my new printer "LaserJet Pro 100 M175a MFP color".

  In the first test to copy a completely black page is out.

  Scanner is also 'not found '.

  Should I is it possible for me to find the solution to the problem or I have to bring it back to the shop?

  Thanks in advance

  Hello trixy

  When a scanner is out an image/file all in black, this usually indicates a hardware problem. If the printer is new you can bring back to the store and exchange it.

  Alternatively, you can call the HP support at 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Tecra M1 cannot connect wireless

  Hello

  This new but I hope someone can help me.

  I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

  I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
  I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

  Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
  No problem connecting via a direct cable.

  Thank you

  Hello

  have you tried to connect with another machine to check if it works?
  Otherwise, I suggest the following things:

  -Disable all security features
  -update the firmware on your router
  -dhcp instead of IP´s sets the value
  -read the manual of the router, sometimes they have weird parameters

  and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

  Welcome them

• El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  Open Printers & Scanners, select the Pro 100 and remove it from the list of printers by clicking the button "-". Then click on the button "+" to add the Pro 100 again.

  If wrong you again then try to print a reset of the print system. Note This action will remove all devices breeders & Scanners, but not supported drivers, so you just need to add the printer again. To reset the printing system, open Printers & Scanners and rest the mouse pointer over the list of printers. Then right click on (or hold down the command key, then) and select Reset from the context menu that appears. You will be asked to enter your password for the process to continue.

• I need instructions for replacing the ink cartridge on my color laserjet pro 100 mfp175nw.

  Can you please send me instructions to replace the ink cartridge on my color laserjet pro 100 mfp175nw.  I have a 126 a cartridge.  Also, where can I get a full manual for my printer?

  Hello revammann

  You can find instructions for the replacement of the cartridge to print here and you can find the user manuals here.

• My computer cannot connect wirelessly.

  I accidentally downloaded a windows vista edition family basic model of office on my laptop

  Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

  Dear, Mizzy2Fy4U

  Hello

   
  1. from which site you downloaded Windows vista home edition?
  2. what operating system is already installed on the computer?
  3. What is the exact error message about hardware and the floppy?
   
  You can also perform the resolution of the problems of Internet connection and check:
  See the link provided:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• ASUS zenbook: HP LaserJet Pro 100 color MFP M175

  I just bought a new computer and are unable to log in and install the drivers for my printer

  HP LaserJet Pro 100 color MFP M175a

  can you help, I can't find anything on your Web site. Is there some kind of special things to do with wndows 10?

  Best regards

  Hi Tim, I don't know why but I tried to install the driver for windows 8.1 and it works! So I can print again with my new laptop. Thanks for the help

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• 8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet

  Unable to connect wireless when adding the printer.  I can see the IP address and the name on the report to the printer, but can not see the printer when I try to log on my computer.  It worked fine until I loaded the latest patch. It's the same thing with another 8600 and I got to the wire that one for the router to print.  This 8600 is too far from the router to run a cable (at the top). (only about 20 feet of actual distance.) I see that the printer is enabled on the router.  I tried to add the printer to the computer with the IP address and the hostname without success. We were working wireless until today.  I've uninstalled and reinstalled the driver without success.  Still do not see the printer.

  Any suggestions?

  I forgot to say that I fail to see the printer wireless to 2 separate computers - an 8.1 and other windows 7.