8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet

Similar Questions

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photosmart all-in-one c309g is connected, wireless, print runs, analyze a computer.

  Have you tried all the solutions available several times through doc of hp printer/scan, hp solutions, including resettlement using disk and downloading on site, uninstall, download patch amd, recovering to an earlier date and reboot... reinstalled to get a definitive answer again "HP Photosmart Premiun c309g-m software installation is complete." ", but your device is not connected.   So I'm back to the original problem... I have a good wireless connection, the printer works... will not scan to computer... MSG 'Try Start scan of the computer' if frustrating... is there a solution, I have not tried?   Pls advise. TX

  Windows 7, 64

  Hello-

  I think I know what the problem is. There is a problem with the processor. I will include a link that will solve the problem.

  http://support.HP.com/us-en/document/c03030583

  There is a patch in that you must run.

  After running the patch, you should be able to install the printer.

• 3520, printer all-in-one will not connect wireless

  I am running Lion on my Mac. The printer works correctly when it is connected by the USB cable. The test of the printer indicates the wireless connection is OK. But when the cable is disconnected, my computer does not find the printer so I can't print wirelessly. The computer says it is plugged into the same ID wireless. I tried to reinstall the HP software to no success. Very frustrating that the printer was working wireless for a year with no problems. It just stopped during the night. Thanks for any help you can provide... Ted

  Hi TED1234,

  There is a chance that the HP software that came with the printer may not work with your version of Lion. I recommend to download the installation here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-103382-2&cc=us&DLC=en&LC=en&OS=4114&product=5162506&sw_lang=

  After you download the driver, I recommend trying to follow the steps listed in the method three second-stage for OS x 10.7 Lion. In step 2 of the second method, there are 2 options. According to what is invited on your Mac, you will want to follow the instructions for the appropriate option.

  Please specify the details of your installation if this does not resolve your problems of wireless configuration. If you encounter error messages, please note them here and attach a screenshot of your laptop. You can take screenshots by pressing "Control + shift + 4" and the screenshot will automatically record your desktop.

  Thank you.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• Pro, All in One 3520 - Downgrade Windows 7 64 bit to 32 bit

  Hi all

  I have a Pro all in one desktop PC 3520 with Windows 7 64 bit pre-installed, for some reason, I think to downgrade the os to the 32-bit version.

  Is it supported? Need a new Windows license (32-bit version) to reinstall the OS?

  Thank you for you in advance for your support.

  Stefano

  To answer your questions

  (1) is it supported? -from this page , it appears that 32-bit is not

  (2) it is necessary a new Windows license (32-bit version) to reinstall the OS? -No, the license key will work with both versions.

  I'm really curious why it's coming.  A Windows operating system, pre-installed, work goes to the function.  What is proposed may not work, so why mess with it?

• HP Pro all-in-One PC 3520

  the 3520 PC does HP Pro all-in-One has a touchscreen monitor please

  This is a machine of i3 level company. There is no touch screen, according to my research.

• -What is the HP Officejet 7310 all in one able to print wireless

  -What is the HP Officejet 7310 all in one able to print wireless

  What operating system?  If Windows and with the printer connected to the router via Ethernet, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• The 7510 all-in-one can be connected to an iMac by Bluetooth instead of Wi - Fi connection?

  The 7510 all-in-one can be connected to an iMac by Bluetooth instead of Wi - Fi connection?

  Hi johnrpiano,

  No, the 7510 does not support bluetooth connections.

• Tecra M1 cannot connect wireless

  Hello

  This new but I hope someone can help me.

  I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

  I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
  I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

  Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
  No problem connecting via a direct cable.

  Thank you

  Hello

  have you tried to connect with another machine to check if it works?
  Otherwise, I suggest the following things:

  -Disable all security features
  -update the firmware on your router
  -dhcp instead of IP´s sets the value
  -read the manual of the router, sometimes they have weird parameters

  and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

  Welcome them

• My computer cannot connect wirelessly.

  I accidentally downloaded a windows vista edition family basic model of office on my laptop

  Now my computer cannot connect wirelessly. Now when I tried to download the cd I wanted to down load which has windows xp, it has not work it says something about the material or the floppy disk. My model laptop is a Hp Compaq 6910p. Please help me

  Dear, Mizzy2Fy4U

  Hello

   
  1. from which site you downloaded Windows vista home edition?
  2. what operating system is already installed on the computer?
  3. What is the exact error message about hardware and the floppy?
   
  You can also perform the resolution of the problems of Internet connection and check:
  See the link provided:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• OfficeJet Pro HP All-o 6978: HP OfficeJet Pro all-in-One Printer 6978

  The all-in-one printer HP OfficeJet Pro 6978 does printing on thick paper?  I see in favor "thick, plain paper", but do not know what it is.

  Thank you.

  Hello

  Thank you for using the HP Forums.

  Please refer to the form, it does not support some cardstock:

  http://support.HP.com/us-en/document/c05061732

  Thank you.

• OfficeJet Pro All In One 6835: Officejet Pro 6835 printhead error

  My Pro Officjet 6835 all in one shows a printhead error.  I installed new ink cartridges about 2 weeks ago, and it printed fine since then.  I tried troubleshooting.  When I try to "Clean printhead" computer, it simply says "printer is busy".  When I try to clean the printer configuration menu, it shows that it is cleaning for about a half second and then returns to the maintenance printer screen.  On one attempt, it seems to work, but after 3 hours, no there was no change or action.  I have reset the printer (unplug the unit for more than 60 seconds - of the printer and the power outlet), off several times and contracted cartridges to attempt to clean the print head.  It doesn't seem to be removable, so I'm stuck.  I'm currently under Mac OS X Yosemite 10.10.3.  I really need to be able to print several documents as soon as possible.  Help?

  Hi @customerHI

  I would advise to call HP telephone support. The print head is not replaceable, and you will need for the printer needs to be replaced. Can you please post back to let us know how you go?

  Thank you

  Ciara

  Americas & Asia

  http://support.HP.com/us-en/document/c04839288

  Europe, Middle East, Africa

  http://support.HP.com/us-en/document/c04839289

• HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

  I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

  You need a wireless setup to print from Android phones.

  Please see this link for mobile printing options available:

  http://www.HP.com/go/mobileprinting/

  WyreNut