LASERJET PRO M1536DNF - problem with send reel

Similar Questions

• LaserJet Pro M1536dnf troubled fax send... just saying fax work added but does not send

  I have a LaserJet Pro M1536dnf, which is used as a stand alone Fax.  When we try to send a fax, the document is scanned, but instead to send the fax, it says Fax added task.  When you check the status of the fax machine it says nothing is stored and the fax is never sent.  I've updated the firmware to the last and it worked for a bit, but now it don't send faxes again.  He will receive faxes without any problem and can reproduce documents as well.  Is there anything else I can do to try to solve this problem.  I went through all the troubleshooting steps that appeared on the Web site.

  Appreciate the help!

  Hi jloo,

  Please check your private messages and let me know if the steps fixes your problem?

• LaserJet Pro M426fdw: Problems with printing of pdf documents

  Whenever I try to print PDFs in duplex (although occasionally same problem print one page) the first page does not print and on the pages that follow, most of the lines are blackened the right edge in towards the middle of the page.  I didn't notice the problem with documents in other formats, but I always have problems with pdf files, and I have no problem, print the pdf to my other printers.

  Do other normal Duplexes of programs (word, etc.)?

  If so, it sounds Adobe specific, otherwise I would reinstall the printer driver.

• HP laserjet pro m127mfw: problem with fax

  Print Fax page 1 stays on the screen of the printer, even if I unplug the power and the cable from the computer.  Once, it will print the last fax received.

  Hi @Kathmanu2,

  Thanks for joining the Forums of HP Support for a solution to your problem of fax.

  I understand that your are using a HP LaserJet MFP M127 with computer Windows 10 Pro and when you receive a fax the display stops at 'Print Fax page 1', then you need to disconnect the cables and it prints the last fax received when you reconnect them. I would like to help with that.

  Looks like the printer memory is full. A the NVRAM initialization is necessary in order to empty the memory.

  I'll send you a PM with information necessary reset. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  Please let me know if that solves the problem, or if you need assistance.

• MFP HP LASERJET PRO M1136: PROBLEM WITH FILLING THE CARTRIDGE

  THE THIRD SYMBOL ON MY PRINTER SHOWS THE CARTIRIDGE OR TONER IS LOW, SO I FILLED THE TONER TODAY BUT STILL THE ICON ON MY PRINTER IS FLASHING, WHICH INDICATES THE LEVEL OF TONER.

  WHAT SHOULD I DO AND WHY HIS SHOWS THE SAME.

  Hi @SAMRAMANI ,

  I see by your post that recharged toner shows always low. I'd love to help you.

  HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use not genuine HP cartridges.

  To get a better understanding to take a look at the document below: benefits Original HP.

  If after changing the ink cartridge genuine HP and you still have questions, I suggest to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-Assis ANSI.org/access/access_t.html

  Have a great day!
  Thank you.

• HP laserjet pro M1536dnf wireless configuration in order to use Air printing

  Since I am trying to print from my new Ipad Air, excuse my newbie questions for networking printing!

  What I know so far:

  1. I understand my printer HP laserjet pro M1536dnf is 'not' a WiFi printer.

  2 by HP support and Apple Support web sites, my printer HP laserjet pro M1536dnf is 'Air Print' active. I guess that a certain update must incorporated the Betacam Air Print!

  3. According to the web site of the HP Support, I have currently the latest firmware installed (20130815).

  Note: On my Config report, it shows the status for IPv4 and IPv6 as "network cable unplugged". I have the address IP Show as active.

  3. my home configuration has the internet cable from my modem cable to my router wireless Linkys E3200 via a coaxial cable. Between my router and my computer is connected through the Ethernet cable. My printer HP Laserjet 1536dnf printer is connected to my computer via a USB cable.

  Issues related to the:

  1. go to after I saw and read about on-line, is correct to say "I'll have to change my Ethernet cable from the router to the computer and change it to leave the router to the Ethernet port on the printer?"

  2. do I have to remove the USB from the printer to the computer?

  3. by removing the USB cable between the printer and the computer, how my computer would communicate to the printer to perform a print job? Unless, I suppose, I add another Ethernet cable between the router and the ethernet port on my computer!

  4 other advice, I might have missed?

  @RicharddR

  Thanks for your post on the forums of hp.com. Here are answers to your specific questions:

  1. you must have all your devices on the same cable modem network: computer, printer, mobile devices. Looks like your Setup is similar to mine. I have mine with the modem installation cable to my Cisco router that broadcast wireless signal. Then I have my devices on this router (computer, printer, mobile devices).

  2. If you use Airprint, you put your printer on a network or wireless. Since your printer is a model of dnf (D - duplex, n = network, f = fax), you must use a network cable and add it to your router. AirPrint is not supported via the USB port.

  3. If you remove the USB cable between the printer and the computer, you need to add your computer to the same network as your added to the printer. You can either do this via the ethernet cable or wireless depending on the capacities of the router and the computer. The important thing is that all the devices are on the same network.

  4. for other tips: make sure everything (computer, printer, router, mobile devices, etc.) are on the same network, otherwise you will not be able to print or have communication problems such as print jobs do not print.

  Good luck.

• HP LaserJet Pro M1536dnf MFP: Inaccessible Scanner for the HP LaserJet Pro M1536dnf MFP

  Problem:    When I try to scan a document I get the following error: (see screenshot below)

  "Scanner inaccessible.... Scanner communication cannot be established. Make sure that your product is powered, check it out connection and ensure that your network is working properly. If these conditions are correct, restart the product and try to scan the image. If you are running a software firewall, it can block scan communication. Please visit www.hp.com/go/wirelessprinting for help to configure your firewall. »

  

  Shortly before this error message appears the scan on the printer function active (i.e. the scan head heats up and moves on the glass while kindled) , but no preview picture ever, only the error message. This error has just occurred within the last few weeks and before the scanner and printer worked flawlessly, although I'm not sure what happens if something changed to cause the problem. Printing features appear to be affected and functioning properly.

  Background:     
  (1) I use a HP LaserJet Pro M1536dnf multifunction printer (product #: CE538A), fax, scanner, copier.

  (2) my OS is a Windows 7 Home Premium SP1 64 bit.

  (3) I also run Norton 360 first worm 21.7.0.11 and System Mechanic Professional worm 14.5. Disabling the Norton 360 Firewall has no impact and I get the same error "scanner inaccessible."

  (4) the computer and printer are both connected by ethernet cable to my wireless router. My router is a NETGEAR R7500-100NAS. I bought and installed yesterday thinking that my scanning error was due to a bad router. This new wireless router has had no effect on fixing my mistake 'inaccessible scanner. The error is the same today as it was before the new router.

  (5) I ran recently updated HP and no new update is available, all windows updates are installed.

  (6) I tried to uninstall and reistalling the full version of the driver without change, I still get the same error.

  7A) when I run HP Print and Scan Doctor 4.6, most of the time, it shows that all controls the scanner, all green checkmarks, are indicated next to Device Manager, the device status, Windows (WIA) Scan, HP Scanner Twain and HP Scan (see screenshot below)

  

  but then, when I try a test analysis, the "inaccessible Scanner...". Communication of the scanner' error occurs.

  7 (b) other times, when I run HP Print and Scan Doctor 4.6, it shows: (see screenshot below)
  Error of scanning of Windows (WIA): the tool has detected a problem with scanning software (WIA]. Remove the software by clicking 'uninstall '. Reinstall the software with t he product CD or by downloading the software full of the latest features of (recommended) HP customer care.

  

  (8) all other aspects of the printer are working very well to my knowledge (it prints and copies without error).

  (9) I am able to view the IP address of my printer in my Internet browser, but there is no available for me WebScan functionality sweep as a workaround.

  Question:

  What can I do to fix the function scan from my printer that worked flawlessly just a few weeks ago? Any help would be greatly appreciated I'm full of ideas on what is wrong or how to fix it. Thank you!

  -Eric

  Hey @Eric_Bucktown,

  Thank you a lot to get back to me regarding this conflict of scanning. Also, thank you for all of the details that you have included in your messages. It is the first time I've heard talk of Mindspark or other spyware cause conflicts of scan. I'll have to remember to have others perform these steps in the future should similar questions arise. Controls only you need to run is the HP print and the tool of analysis of the doctor. It is designed to fix all possible system software driver and conflicts on the computer. However, as you can see, spyware and malware can sneak between the cracks.

  I brought this question to one of my colleagues who works with computers rather than printers. After I explained to him that you had made to solve this problem, it was suggested to keep your system in good working order and to avoid future conflicts of scan, you run the Malwarebytes Anti-Malware and SUPERAntiSpyware Free Edition once a month. Also, just to let you know, Malwarebytes Anti-Malware and SUPERAntiSpyware Free Edition software does not actively scan your system unless you use the complete edition of Malwarebytes for a cost. This means that the software does not always find the infected files and will only scans your system on a regular basis. If you use your computer frequently, you can perform analysis at the same time a couple of months, and not once a month.

  If you encounter any problems in the future, please don't hesitate to reach out for support on the Forums of HP's Support. It was a pleasure to work with you! Good day.

• HP LaserJet Pro M1536dnf: Re: help cold reset for M1536dnf]

  Hello

  Please send me the instructions to reset cold this printer. I can't access the web interface or the menu of the printer. Thank you.

  Hey @ccalderon,

  Welcome to the HP's Support Forum!

  I understand that you are looking to perform a cold reset on your HP LaserJet Pro M1536dnf multifunction printer the menu on your printer and built-in Web server do not respond. I want to help you with this today.

  I will send you a private Message with instructions on how to reset NVRAM on your Laserjet programming. Please check your private Messages for instructions.

  Good luck!

• Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

  We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

  Hey Candlmc,

  If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

  This is the section that will allow you to change the ring volume and the volume of the phone line.

  Hope this helps,

  Jason

• problems with sending/receiving messages

  For the last two weeks my iphone 6 s and my son 6 more have had problems with sending/receiving messages in the texts of the Group and regularly comes to a voicemail.  Messages are not at all or you may be able to receive them. Then last night on a group text between me and another user of iphone and a droid user messages were not all going through and an 'unknown' appeared on the screen of the droid users as if this person has attempted to send a message to our group text but nothing was there.  Iphone users could not see it.  This morning - messages still does not go through the text of the group or on one.  Any ideas?

  SMS texts are a function of carrier

  Control an upgrade of the carrier

  If the droid user used an iPhone before having them their registration number

  Also check with support carrier technique

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• LaserJet Pro 200n: problem printing PDF with HP Laserjet Pro 200n

  Hello

  I have problems printing of PDFs of our color laserjet pro 200 hp MFP M276n.

  I get a sheet of paper and a blank message on the printer saying 49 service error - power off, then on

  I can print from word/excel documents. It started only recently, and the printer used to work properly. I have updated the firmware of the printer from the Web site and also downloaded the new driver software and deleted, reinstalled the printer.

  Connected printer throgh network, using the static IP address. I have reset the default printer and reinstall with a different IP address. The problem still exists.

  Let me know what to do for them.

  Hello

  My printer now works, and it is wrapped only because two or three color toner runs out, and the printer to enter this mode. Really stupid... as I tried to print the document B & W, and then set the options pint to print grayscale.

  In any case, the solution for me is that make sure toner all have dye in it, and youi don't have no cominng message saying 'Replace cyan"etc...

• HP Laserjet Pro M451dn: Problem on a computer with the printer fonts

  Hello

  We have three computers that seem to be running the same configuration.  The problem occurs with Microsoft Publisher as follows:

  -On both computers, when specific documents are called, they work fine and fine print

  -A computer, when particular documents are called, we get the error: "load fonts - information on the police below shows what fonts are embedded in your publication or are unavailable - Goudy/unknown/not available & Goudy ExraBold/unknown/not available."

  I checked all computers and confirmed that the same TTF are installed, even to copy fonts goudy from one computer to another to ensure that they are the same.

  When I go into one of the computers that work and look at the "commercial fonts" section in Microsoft Publisher, it tells me that:

  Police = Goudy

  font type = printer

  Police source = system

  Police = Goudy ExtraBold

  font type = printer

  police source = system

  I tried to install the latest drivers for the M451dn of Laserjet Pro, but the fonts are not yet available. I have no idea on how printer vs TTF fonts. If it were an FTT, I would simply copy, but I don't know how to fix this computer to access the printer fonts.  Any help will be greatly appreciated.

  Thank you

  Jeff

  > fonts, I'm looking are listed as "Additional PS emulation fonts" for a different model printer.  When a non-PS driver is used, the driver can always access these fonts...

  I don't know for certain, but I guess these "Fonts additional PS emulation" can probably be used only if you are using a PostScript printer driver.

  If you use a printer PCL5 or PCL6 (PCL XL) driver, then these policies probably are not accessible.

  EDIT: I found an online source for one of these PS_12542.ttf (= Goudy) fonts, and it doesn't seem to be a valid TrueType font that (in theory) can probably be used by other pilots.

  But this policy has a "limited" license, which means that it cannot be incorporated in the documents:

  

  It is possible (probable?-I don't know) that support routines and standard printer drivers that you cannot use this policy as a "source" for temporary downloaded fonts "smoothly."

• OfficeJet Pro 8620: problem with ink

  Hello. I have nothing else to the HP printers used in my life using the computer - more than 25 years! I bought a new Officejet Pro 8620 2 years. I also bought cartridges refilled at the same time as my father died and I would need to use the printer a lot. Unfortunately, I bought ink another 3 times for this printer, when printing somewhere near 100 pages ALTOGETHER since the purchase. Problem is the printer keeps saying cartridge is not HP and damaged - should replace the HP cartridges. I've NEVER had a problem before using reloaded cartridges. Why change now? Am very close to get back to using my old computer Win XP and more old HP all-in-one printer. I have 3, and none of them has NEVER given any problems.

  Looking for help on this. Have always had confidence in HP before - don't want to lose that now. Last cartridges were new HP, but still having the same problems. Suppliers of ink have been highly evaluated with excellent reviews. Warranty expired a year ago. Haven't had extended warranty because, as I said, never had a problem with HP printers to more than 25 years.

  In addition, cellular internet very limited - and not (!) reliable. 50 miles of the city.

  Yes, I learned a LOT over the weekend. First of all, I ordered a few inkplicity.com ink. Am curious about their ink, with their 1 year warranty. Shortly after ordering, I contacted Fuzoo, who then asked me to photograph both sides of the chip. I had no idea of the chip was removable. And actually, I see on the YoYoInk cartridges that the chip is glued in place. Then, I saw a few chips ink auto reset for sale online. And then began to find a lot of links and messages and articles on the chips of HP and the problems associated with them. Like my old printers were about 2000 or so, I had never met the problems associated with the current chips.

  Now, Fuzoo has graciously agreed to replace not only the Magenta faulty cartridge (which has their 'old' piece), but will send a full order before, which was black (2) and a set of color inks. Can't get much better than this! So it would seem that I'm no longer need an explanation of why this happens - it's all about HP and their need to force their customers (who FREELY CHOOSE to buy their printers) in the purchase of HP ONLY cartridges.

  It is a free country that is stuffed with capitalism. You'd be hard-pressed to get into any grocery store and NO search of generic items just alongside their counterparts in brand and usually for less money. You have car trouble? Generic (non - OEM) parts are available, as well as a lot of rooms refurbished. HP should remember their place in the grand scheme of things, or they will go the way of many other electronics companies. Trying to force customers to pay more for ink is bad. ... So this would increase the cost of the printers in the first place? Yes, probably. I was always ready to buy quality products when I could afford to, and HP printers had always been reliable but also easy to use. With this printer, I swore to the dang thing a lot more that I used it.

  Please, ch, make the message and ease up trying to railroad customers. Even us loyal customers for a long time "' will leave! Don't forget, we are customers of HP by "choice"!

  Problem is now solved. Thank you all for your comments!

• Driver HP LaserJet Pro P1606dn problem? -windows could not load print processor "HP1100PrintProc".

  I have a Windows 2012 R1 Print Server that hosts a network HP LaserJet Pro P1606dn printer (driver version: 5.0.1.57036). Printers are successfully applied by group policy. He has no problem printing, however, when users log on to a server to remote desktop of Windows 2008 R2 and Windows 7 computers, the following error message appears in the system event viewer:

  "Windows has no load HP1100PrintProc print processor because EnumDatatypes has failed." Error code 126. Module: HP1100PrintProc.dll. If please get and install a new version of the driver from the manufacturer (if available) or choose another driver that works with this printing device. »

  Any advice how to solve?

  I used the HP PCL5 universal driver and this has solved the problem.

  61.130.4.12834 worm.