Color Laserjet Pro M177fw MFP: HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

Similar Questions

• HP Color Laserjet M177fw MFP Pro cool mood after printing all pages.

  Hello!

  I have the same problem as these other guys. Could you send me the same solution as well?

  Hello

  Thanks for the forum invited, please check my private Message

  I hope this helps you!

  If my post has solved your problem, please mark it as "accepted solution".

  +++ Say thank you by clicking on the star of congratulations in the post.
  
  Although I am an employee of HP, I speak for myself and not for HP.

• OfficeJet Pro 8600 not to print all Pages of multi-page jobs

  
  

  Problem solved: remove the printer and reinstall seem to have done the trick.

  This is very useful information on the surge protectors.

  Thank you

• LaserJet Pro M127FW: LaserJet Pro M127FW stuck to print Fax Page 1

  I encounter an error on the MFP HP LaserJet Pro 127FW where it is blocked to message "Printing Fax Page 1". Cannot do anything else on the printer. I tried feeding this bike but still does not work. It has been like that for a few days now.

  In my view, there are some instructions on other threads to do a hard reset. Help, please.

  Thank you.

  As this does not work, I'll send you a private message describing how to perform a factory reset. You should see a private message to your forum Inbox shortly.

  Please let me know if this clears the fax message.

• LaserJet 4100n: LaserJet 4100n hangs after printing 2 pages followed by a blank page

  Until very recently, the LaserJet 4100n printer we had put in place was working very well. Today, we noticed that whenever we try to print something that is longer than 2 pages long, the same behavior occurs.

  First of all, it will display the first 2 pages of the document correctly. Then he goes to crash an empty page, stop printing, but still got the message "Processing Job of tray 2" on the screen, as well as data LED continues to blink and the printer does the usual printing sounds (though nothing comes out). Even if I wait and leave it like that, nothing is printed.

  If I lift the Panel before when it crashes, the noise stops and the screen displays a message "close the front cover. At the close the front cover and wait a few moments, the print job takes over and the next 2 pages of the work print, as well as another white page, and the printer hangs once more. It is possible to repeat the process until the print job is completed, but it is tedious and time consuming, whereas the print jobs may have a lot of pages.

  It is also worth mentioning that no error messages appear in the event logs, and we use this printer as a network printer.

  Any ideas?

  You have a stickey solenoid which controls the roller in tray 2.  You suggest doing a google search for the service manual and then look for instructions on the decomposition of the printer in 2 halves.  The lower half will be where the solenoid.  You remove all the screws of the cover plate and remove the plate of the electromagnet is on the right side toward the front and has 2 black wires, it will.  Remove the solenoid, remove the spring for "L" arm and then clean up the residue of glue that held the cushion damping in place.  Replace with the material of substitution as a buffer of furniture pad slim cut.  Replace the arm L put the reel in place and back and it should work perfectly.  For tray one you must order a tray 1 separation pad.  Yet once, just do a search on google for the element as it is real cheap and very easy to install.

• HP Officejet Pro 8500: HP Officejet Pro 8500 ceased only printing partial page in pink only

  Printer was only print a partial page of the multi page document. Replace the printer cartridges. Has run HP Diagnostics and cleaned the print heads. Still no change. For priting only a small amount of test page in pink only. Also have cartridges removed and rehabilitated. Have restarted printer several times. Please notify.

  Hello @help411911,

  The Forums of HP is a great place to find answers to the questions/problems you may have, welcome! I see that you are facing some print quality problems when you print to your HP Officejet 8500. It is printing in pink only and partial pages. You have performed the steps in troubleshooting without success.

  1. When you performed the cleaning and printed the test page, have you seen all the colors on the page or is - this only rose as well?

  2. are you able to make a black copy?

  3. When you upgraded to Windows 10 you would update the software and drivers for the 8500 JO so?

  What does the HP print and Scan doctor find? I look forward to hear from you.

  You can say thank you easily by clicking on the ' Thumbs Up ' below!

• Brand new 710 6500 of Macbook pro OS 10.6 arrested after printing 10 pages

  computer sends something to the printer, need the paper and the print head moves as it should be printing, but no ink comes out at all. White pages. Same thing happens with several different programs, Entourage, excel - he has worked for 10 pages. Test page prints correctly. Can also print machine fine Winxp.

  Printer restarted, rebooted the computer, reinstalled the drivers, then uninstalled all the HP software and reinstalled, then read this forum and reset the list of printers. Anything not fixed so far.

  I am in security, have not tried to talk to HP yet, but tomorrow. Try here first.

  Thanks in advance.

  Thanks PrintDoc, I forgot to mention in my post that I also included this step in the middle of everything I did without effect.

  However, I got on the phone earlier with support and we have deleted and reinstalled everything and it works now.

• All-in-one Officejet Pro 8620: hesitation in printing final page

  Just bought this printer and it works fine except for perhaps as long as 10 seconds in the middle of the last page of a multiple page print job stop.  I had several HP printers over the years and have never had this before.  Generally, the pages just well rip out all the way to the end, but it's very annoying.  It's just a feature of the machine, or can I do something?

  Thanks for your advice.

  DC

  Thanks for the tips.  It IS Wi - fi so it might be the issue.  So it goes.

  Take care.

  DC

• HP Color Laserjet Pro M252 - not to print a PDF file

  Hey Adobe Forum,

  I have a problem with a M252 Pro of Laserjet of color HP which will not print all PDF documents. When you try to print a PDF file, the document is idling to "print...". ».

  Information about the current configuration:

  1. the customer is on a Windows 7, 64-bit workstation.

  2. the pilot is the last on the site - HP Color Laseret M252 PCL6. I tried the PCL5, PS and HP universal printer drivers.

  3. the printer has been added as a local printer TCP/IP (10.45.157.31/24) and a shared printer from the server. The two did not work.

  4. the workstation has Adobe Reader X installed the latest updates. The upgrade of the revision to XI or higher version is not an option.

  5 other files can be printed such as images and Microsoft Word documents.

  6. I tried setting Adobe for 'Print As Image '; It did make a difference.

  If anyone has any suggestions, please let me know.

  Thank you

  Max

  It turns out that, the question not print was the result of an incompatibility of duplex on the switch port to which it was connected. I tried an administrator account that does not correct the problem. Print jobs were still sitting in the queue up to 5 minutes after selecting printing. A PDF file passes finally after minutes of waiting, but was cancelled by users after assuming it was the slightest error / stuck.

  When checking switch, there was a lot of duplex mismatch errors in newspapers. Double-sided printing has been on before auto however there may be problems with automatic duplex printing. I put the port 100 Mbit/s/full that if it is in offline mode. I put it at 10 Mbit/s/full and it came online and all problems solved.

  Thank you for your help.

  Max.

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• HP color laserjet m451 print 2nd page upside down, why?

  I have a HP Color laserjet m451dn which has a capacity of dulpex automatic. I created a two page brochure in Adobe InDesign CS3. In printing the file, it prints the second page upside. I have front and back on or go back upstairs, the 2nd page is upside down. It does this with my pages of graphics program as well. Can print a Web page, document word without problem [with several pages]. Even if I select "print on both sides" and "Finish" even problem.

  Can I print one page at a time? I'm sure I can, but could someone give me the correct instructions: what [s] sandbox use: ending of paper and how to I insert in the tray (external or internal) which direction?

  Help, please! It makes me CWAYZEE!

  And thanks in advance,

  Ellen

  no_problem wrote:

  Ellen,

  If your M451 prints both sides correctly using your MS word or other Microsoft applications, your problem is with the printing preferences in the Adobe package you mentioned, and unfortunately, I can't learn where your package preferences is that allows you to print on both sides in a brochure format.  However, I can help you with "manually printing two-sided" (at your request).  After you printed side 1 of your two-sided brochure, place the side face upwards in the feeder - the top of the page printed forward or inward toward the direction of advance.

  No thanks no problem [that sounds weird to say; > D].

  I found the solution on my own. As I have said, it was only happening with InDesign CS3 and Corel Draw. I don't think it has to do with the programs BUT, Ta Ta! Here is the solution that I found:

  1. open the print dialog box

  2. After you have put [a journal] in the [set #1] outside bar in the print dialog box, select "Paper Source", then in Tray 1 Manual power.

  3. Select 'Finish' and check "Print on both sides", and then print the first side.

  4. a 'message' on the printer control panel will come [heck, I forgot what he said <> but something to the effect that I should continue the process of printing].

  It allows to print the first side, then pull the paper back and the second part print correctly! YEEPEEEE!

  It worked and if you have a faster procedure, please let me know. Sometimes to find a "work around" and it works, even if it takes more time do you! But if one more easy procedure that is faster and less "hoops" to pass, my boy.  .  .  I'm a game for it!

  Is do what ya have to do, but if a faster easier way comes along, PAHLEEZE! Let me know!

  And thanks again,

  Ellen

• Color LaserJet CP1025: printer prints one page and then stops

  I've had my printer for several years. Now, when I try to print a multiple-page file, it prints a page and stops. I need to print each page individually. It is never used to do this.

  Hey @Egolioxon,

  Thanks for posting in the Forum from HP Support.

  I understand that you have a problem of partial print job when you use your HP LaserJet Pro CP1025 colour printer.  I would like to help.

  First of all, I recommend to run you HP and Scan Doctor for Windows printing.  You can click here to install it.  This utility can find and fix what is sick of your configuration.  In addition, if this approach does not help, I suggest to work your way through the steps listed in this article from HP.  She is expected to rule out possible problems of print queue.  Finally, it won't hurt to empty your temporary files, as explained below:

  Clear the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks again for your post and have a great day!

• HP Laserjet Pro CM1415 while a printer/Scanner

  I just 'restored' all the info on my new iMac to my MacBook Pro. I can print but cannot scan using HPScan 3. Two computers use OS 10.9.2. How can I get my Scan to work? I need new drivers? If Yes, where can I find them?

  Thank you

  Hi pocoguy,

  Welcome to the HP Forums.

  I see that you are not able to scan with the Laserjet CM1415 since the restoration of all the info on your new iMac to your MacBook Pro. I will do my best to help you with this problem.

  Uninstall all the old software. Printing software uninstalled.

  Then download and install the new software of the printer.

  HP LaserJet Pro CM1415fn color MFP series Full Software Solution - OS X 10.9 Mavericks.

  This should help you back in business again.

  I have provided a document for how Scan: v10.9 OS Xor with the HP software.

  If there is anything else I can help you with just let me know.

  Have a great day.
  Thank you.

• Just got my HP LaserJet Pro M451nw 400 and it prints all greenish! Tried everything

  Help!

  I just got my HP LaserJet Pro M451nw 400 and it prints all greenish!

  I tried everything in the troubleshooting page for quality of printing, calibration, color settings, page, even the driver HP Universal PS of cleaning.

  When I entered my product in the registration area, it is said the warranty is good until June 2014 as Newegg said the guarantee would be also 1 year ...

  I'm sorry you're having trouble with your new LaserJet print quality.

  I assume you are using supplied with the printer, toner cartridges since this is brand new.  Otherwise, recharged cartridges sometimes are not of high quality and can cause less than optimal printouts.

  The following link gives several options to try if you have not already tried these things:

  HP technical support URL

  One of the options I copied from the above URL:

  Adjust the color settings in the printer driver

  Change the theme color for a print job

  1. On the file menu in the software, click on print.

  2. Click Properties or preferences.

  3. Click the color tab.

  4. Select a color theme from the drop-down list of color themes.

     1: tab color

     

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml