Last runtime engine does not support XP

Similar Questions

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• I try to run speech recognition on Windows 7, but I get "your current engine by default does not support this action at this time".

  I have a built in microphone and it can clearly hear me on Skype. Also, in Control Panel, "Set up a microphone" I read the text «Peter dictates to his computer...» "the tapeworm down meets my speech and volume, so clearly that my mike works.  However, in the next screen, I get "the computer didn't hear anything like that".

  Hi David Loxley,.

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  http://Windows.Microsoft.com/en-us/Windows7/use-speech-recognition-to-operate-Windows-and-programs

  For reference, you also visit the given link: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/your-current-default-speech-engine-does-not/c9b657f2-b04f-46e6-ae7b-06af2f900c23

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?

• Unlocked Iphone a1549 does not support the Turkish GSM Carrier

  Hello

  I bought an Iphone 6 128 GB a1549 renovated factory unlocked from amazon, while I was in the United States. I came back to Turkey last Thursday and bought a sim card to use here. But my Iphone says it does not support the sim card. What do you think could be the problem and how can I solve it? Thank you.

  senyavuzselim wrote:

  What do you think could be the problem and how can I solve it?

  The phone is not unlocked.

• I get the message "this search engine is not supported by Firefox and cannot be installed" whenever I try to install a plugin to search on the Mozilla Add-ons site. Why?

  Any search plugin I chose to install it from the list of search plugins FireFox on the Mozilla Add-ons site, I get the same error message - "this search engine is not supported by FireFox and can not be installed. I tried to delete the 3 files in my profile identified in the article on troubleshooting plugins, but it did not help. I am running Firefox with administrator privileges, but it does not help. The problem seems to be with the search plugins. I can install other extensions that are not plugins from the Mozilla Add-ons site search, but not the search plugins. I tried restarting FireFox and restarting the computer severaltimes, but I get the same error message when I try to install a search plugin.

  Something is messed up on the pages of plugins MySapce AMO. Clear the URL bar and type something here (but do not hit Enter) - then you should be able to proceed with the installation of a search plugin.

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• Pavilion 23-b244 AiO: the system recovery media does not support this computer

  Hey all,.

  I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

  Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

  I think that's why I'm not able to boot to recovery discs?

  Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

  Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Display card/video card does not support DirectX

  First of all, I thank you in advance for any help I receive...

  When running a game program, on occasion, the program is interrupted by a blue screen with a message something very long fault and then my computer shuts down. When I reboot, I get the error message statement, I send and the message...

  To upgrade your

  This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer

  If someone can point me in the right direction, until the card video and/or display adapter that I need, I would appreciate it. I don't run a daily automatic updates... don't know if it's important. Thank you, once again.

  Hello

  ·         What is the exact blue screen error that you are experiencing?

  ·         Game in which you try to read?

  ·         Which version of DirectX is installed on the system?

  Method 1:

  If you do not know the version of DirectX that is installed on the system, then, I suggest you follow the steps mentioned in the article below.

  How to determine the Version of DirectX using the DirectX Diagnostic tool

  http://support.Microsoft.com/kb/157730

  Method 2:

  I suggest to download DirectX on the system from the link below and then install it on the system and check if the problem is resolved.

  End-user Runtime Web install DirectX

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• Error - device 0 video card does not support at least shader model 2. Please update your card.

  Original title: Windows Xp graphics Shader model 2.
  We receive a message that says "device 0 graphics card does not support at least shader model 2. Please update your map"for a new pc game SIMs3... can you help me with this, please. We have downloaded the version lasted Grphics Intel for Windows;  Where map video to update / upgrade? Thank you for your time.

  Hi Yagimc,

  What is the model of the graphics card?

  To play SIM 3, the graphic card must meet the following requirements:

  DirectX 9 compatible .0c card with 128 MB RAM (NVIDIA FX 5900/ATI 9500 or better) and support for Pixel Shader 2.0.

  You can contact Intel support to check if your graphics card supports the above features.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• HP Envy TouchSmart 360 x: plugged in, does not support?

  Recently I used my laptop to play Fallout 3 for a fairly long period. Last night when I closed the game my battery indicator says plugged in, does not support. I tried to uninstall the control method compatible battery and reboot, but that did nothing. This is the second time that this happened to me, but the first time that the battery just started to load it again without doing me something for her, but this time, nothing works. I can't take out the battery and test anything, without the battery because I don't trust myself to disassemble my laptop because the battery is inside. When I use the HP Support Assistant to check the battery, it is said that it is ok and the battery indicator indicates that he is in charge, but about ten seconds later it stops to load and the auditor of battery indicates the battery status is unknown. Is there something wrong with my battery?

  @Are_Zee,

  Hello and thanks for the display on the HP support forums.  If you experience a problem when the battery is in fact showing ok and does not appear in the indicator so that you can do is try to do a system restore before the problem started to see if it's the software causing the problem.

  So you can try to perform a calibration of the battery.  Here is a link to help you with that.

  HP laptops - test and calibrate the battery (Windows 10)

  Please let me know how it goes.

  Thanks again for posting and have a great day.