Windows repair problem

Similar Questions

• Satellite A135-S4527 - Windows encountered problem & fails to load

  At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
  Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

  Fortunately the data is saved, but I have no recovery disks.

  How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
  If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

  Hello

  As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

  If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

  Good bye

• P2-1120: Windows repair disk

  My computer Windows 7 needs a repair disk to initialize, but I can't do the him since he cannot start... My other computer is a windows 10 and I wonder if a repair made a computer disc windows 10, be compatible with a Windows 7?

  OneOneWorld

  Hello;

  Let me welcome you on the HP forums!

  I read your post about needing a Windows repair disk and wanted to help.

  Sorry, but from what I remember, the Win10 option is to create a recovery disc - and is supposed to be written on a USB key.

  If your Win7 PC can boot on USB, you can give it a try.

  But if it does not, the ISO file to create a repair CD Win7 can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

  When you download this file, it will be an ISO file.

  To make a CD bootable it, you will need to download and install ImgBurn.  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

  To make a USB bootable of it, you will need to download and install RUFUS.  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.

  Then the media start and run Startup Repair three times - that's right, three times - as it takes three passes to repair all files of the boot loader.

  IF it works, when you delete the media and reboot, you should then start a Windows desktop computer.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• window repair virus won't let me not even run in safe mode system restore.

  original title: window repair virus won't let me not even run in safe mode system restore.  What should I do now?

  Research on the web.  Not far from the computer.  Computer is speaking.  Windows repair itself downloaded to my computer XP Prof  Apparently erased all programs, all about office except explore and recycle bin.  Computer restarted in safe mode to do a system restore to an earlier date to wipe clear out of the memory of the computer.  Has started the system restore, you click on a date, click, hourglass and then nothing.  No message, nothing.  Click Next again and still nothing.  Download Security Essentials.  Took several attempts so that it can be updated.  Computer turns off.  EU Security Essentials uninstall and reinstall.  Finally updated.  I hope this works!

  Hi, John. I had to deal with this virus of the Windows repair. I have had pretty good luck (fingers crossed anyway) by using the removal guide posted on bleepingcomputer.com.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-repair

  They have a program called rkill download that stops all the running processes. Allows you to prevent the virus from Windows repair. It will give you a file log and show you things that stop you. Write those down.

  I had the same problem you had with not be able to update Malwarebytes. I would like to run rkill, run Malwarebytes, and then reboot and repair Windows would jump to the top. On the third try, I didn't restart after running rkill and Malwarebytes. Instead, I searched for the files that rkill to stop (and I wrote down) and remove them manually from the C drive. Also, I have downloaded and run CCleaner which has removed registry now dead keys associated with the repair of Windows virus in the registry.

  CCleaner: http://www.piriform.com/ccleaner

  Then I rebooted. That seemed to do the trick: I was able to update Malwarebytes again. I ran the program display offers the site computer network, and which unhid all files that was hiding the Windows repair virus.

  Again seems to work... thought it might be of help to you as well! Good luck!

• How can I restore my desktop computer and programs in windows xp afer windows repair trojan

  I have a malware that it's windows repair, got rid of it with malwarebytes, superantispyware, and norton but my windows desktop and programs will not return.  I get back my files however.  What can I do to restore my desktop computer and programs?

  Hi DanaHahn,

  ·         What happens when you access programs?

  ·         You receive an error?

  ·         Office missing?

  Try to boot in safe mode and see if the problem persists. Report of the results. Respond with more information so we can help you best.

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Can't go beyond starting windows repair

  Hi, I have a problem with startup on my Acer repair. the option is to launch Windows repair or restart normally. Of course it does not work. When I select the repair option it asks to select the local drivers. I don't know which select here? I guess that the problem is with windows, but there are dozens of files within this option and I don't know which of these to select the choice?

  Hello

  (1) what is the specific issue that you experience when you try to run the system restore?

  (2) what is the exact error message while trying to start?

  (3) have tried to boot mode safe?

  Refer to the below section which can help you perform a startup repair

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  You must select the C: or OS: drive to perform the Startup Repair.

  Hope this information helps.

• Can upgrade you Vista to 7 if the Windows repair failed?

  I'm having a problem with my computer (Vista Ultimate 64) where there is a failure of the system, and it does not start, just restarts. Windows repair has not solved the problem.

  Would it not be wise to purchase a Vista upgrade to Windows 7? This update level or likely to fail?

  No, you can do a custom installation:

  How to: perform a customized Windows installation

• Get an error "Windows repair disc has stopped working' when creating Windows 7 repair disc.

  * Original title: Windows 7 cannot create a repair disk

  Hello

  I have a new alienware desktop computer running windows 7. When I try to create a system repair disc, I get an error message that says that Windows repair disc has stopped working, this happens until I get to the screen that allows to select a drive. Here is the crash report. I have read some of the related posts and I don't think I have the synchronization of the box and I did not backup Dell although I have something called AlienRespawn.  Please help thanks.

  Problem event name: APPCRASH

  Application name: recdisc.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7990e

  Fault Module name: ole32.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c92c

  Exception code: c0000005

  Exception offset: 00000000000284fb

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: e574

  More information 2: e57488545f86d383cf00c40c411daee5

  3 more information: 6d8c

  Additional information 4: 6d8c259a187c440c17982de29c5dc6e7

  Hello

  The problem was definitely Alienrespawn. I was able to create the with Alienrespawn recovery disk and turned off once I was able to create in Windows 7.

  Thank you very much for the help!

• Firewall Windows in Windows 7 problem

  Whenever I turn on my computer, I get a message in the center of the action that Windows Firewall is disabled. I turn in but when I turn off the machine and restart the same thing happens.

  Anyone can help solve the problem?
  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click on start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• To the PSE11 windows 8 category PSE6/windows vista: problem catalog conversion

  Hello. I saved my PSE6 on external hard drive (I optimized/repaired before saving) and then installed PSE11 on the new 8 pc windows - no problem. Followed all the advice, I have seen/read to convert saved PSE6 catalog but doesn't seem to find (I tried custom location / browse and go to the folder where the backup is saved, but it just says: "no file matching your search").

  I then tried to install PSE6 on new computer restored catalogue him, then looked for the catalogue still in PSE11. It seemed now to find and convert, but some files where missing and a lot of keywords/tags as missing.

  I tried to uninstall the lot (including the removal of the files in the files they were saved in the new computer) and after looking at the Forum, tried to backup old PSE6 on old pc again, but this time the first saved metadata on files and then sustained upward (took HOURS!) Reinstalled PSE11 on the new computer and tried - back to the first problem - does not "see" the backup, even if I know it's there (there is a .tly file, etc.).

  I don't really want two versions of the PSE on the new PC and I REALLY don't want to have to start from scratch all 5000 marking files! I hope someone can help and tell me what I'm missing. I certainly not a seasoned PSE user, mainly due to lack of time and started with PSE6 knowing nothing at all. Am hoping to have more time to use PSE as I will work from home, but I just spent the major part of 2 days trying to figure this...

  Yes, of course. Please check that you check the box corresponding to the maintenance of the folder hierarchy.

  Thank you

  Catherine

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows 7 - problem 'says that my laptop was inconsistent.

  Original title: Windows 7 problem.

  At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.

  Hello

  Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.

  To start the computer in safe mode with network.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Please let us know if you need more assistance.

• A virus deleted my windows\repair to xp media edition sp3 directory. How can I return the repair folder?

  I have a gateway xp media edition with sp3.
  Had a bad java/feat virus and it deleted my C:\windows\repair folder.
  Cannot find my recovery disks. Is there a place of Microsoft
  can I download the file directory? If not, is it possible to copy the repair
  Directory of any xp cd to replace my missing?

  Thanks for any help you can provide.

  Hello

  ·         Are you able to start on the computer?

  ·         You get the error message?

  ·         What anti-virus program do you use?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

   

  I suggest you install the latest anti-virus Microsoft Security essential on the computer program and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If you have Windows XP CD you can try to check and scan of System File Checker running if this can help.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• I have a virus called windows repair

  Please help cannot get rid of the virus called windows repair

  Download malwarebytes startup in safe mode / networking (reboot hold F8 down). Put to day then do a full scan