Similar Questions

• Change the audio level of many clips in the browser?

  I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.

  Is it possible to change the audio level in many clips selected in the browser?

  Select the clips.

  Go to the Clip > Audio Options > Audio Gain

  When the Gain Audio pane opens, set Adjust Gain of: -12

  

  Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.

  MtD

• iMovie - set audio levels manually extracted

  I think remember when I learned to use iMovie for years that there was a way, after extracting audio from a clip, to manually adjust audio levels in the clip. So if there were a few places in the video where the audio to be more or less than I wanted to, I could do by dragging the level a little line upwards or downwards. Is it possible to do it in iMovie ' 09? Or is the only option to change the audio level for the entire clip? I know it's possible discolor or fade out, but I'm looking for more specific control.

  You can still do.   Place the cursor on the line of horizontal volume of the audio clip, and then Option/click on it.   That will place a small point on the line

  You can go up and down to change the volume.   You can place several points along the line of volume, where you can adjust the

  volume at specific locations in the video.

• Y at - it a keyboard shortcut to raise the audio level upwards or downwards by a 1db?

  In Final Cut Pro, you can select a single item, or a track or group of clips, and press on the + or - button to increase or decrease the volume of the clip, 1 dB at each tap, so you can quickly make this slight change in the volume of perhaps a music or voice to follow and quickly see how it changes the relationship between the music and the voice , or something similar.

  I know that you can manually change the audio levels of clips in Premiere Pro by pulling on the audio lines..., I know you can navigate VIDEO - AUDIO OPTIONS and punch in a db of change as well, but none of these options are are fast as CONTROL + or - to continue to see how 1db upward or downward change affects balance.

  Is there a keyboard equivalent in Premiere Pro?  Thanks in advance for your help.

  In CC, there are a few new shortcuts for "Clip Volume"... Finally!

  They go by increments of 1 dB or 6db. I would prefer 3db, but better than nothing.

  UPDATE: in fact, in preferences > Audio, you can adjust "Volume off." Yay!

• Plug in microphone is very soft, there is no icon in 'line' or select to change audio levels.

  Hello
  I have a microphone plug that goes directly into my microphone jack. The microphone DOES not work, but it is almost silent and people can barely hear me.
  The only microphones that appear in the control panel-> Sound are my fault, and there is no icon in 'line' or whatever it is to recognize the microphone so I can change its sound levels. This certainly isn't a problem of pilot mine are all so far and the helmet is not a usb plugin. Disabled and disconnected devices are all displayed.

  Thank you.

  Hello

  Thank you fo contact Microsoft Answers.

  Try to reinstall the drivers. If this fails, try updating the driver software.

  Response if the issue is not resolved.

• Premiere Pro timeline change audio level

  Hello

  I was re-encoding of a bunch of old masters XDCAM the last two days and discovered an interesting problem. When you drag a channel 8 XDCAM MXF in the panel mounting Premiere Pro replaces the audio level of the clip.

  I made this little video showing the problem...

  Is this a bug or I do something wrong?

  Thank you

  Best,

  Kristian

  Kristian,

  This has to with the audio "right pan." This happens when a mono channel is panned Center. To see your appropriate levels, you need to either pan your tracks or to adapt the law to pan. (i.e. panning your first piece of your bars all the way left and right channel all the way to the right in the mixer once you let fall on the timeline and see if your levels do not fall back to-12.)

  I'm not at my post, and I'm never my audio first, so I don't know if it's adjustable in first. But in applications audio as Nuendo, this can be set by the user (right pan 0, - 3db + 3db, etc.) so that levels read correctly for the workflow.

  Maybe someone who is all their audio data in first to their position or fact can tell you how to adjust it. But this should give you an idea of what's going on.

• Get consistent audio levels

  I have ben to do a family film on the year for the last 7 years. I'm just an amateur, but I'm a little bit better. This year I really want to improve my skills on audio.  I know the basics, like the volume control for individual items, a beach in a clip of setting and so on, let never greater than 0 db noise and so on. What I would really like some help with is how to get consistent noise levels. What I mean is this: Let's say that I have 30 clips in my calendar, I select all and set the audio to-6 db. Even if the clips now how the same audio level, clips are noisy, and some are low. What I have to go through each item and set - if so what I'd be looking to make all points to the decibel even? Use the waveforms and my eyes and try to align the shapes so that they are at the same level, or is there a simpler solution?

  -No hear/see the chronology of first hand, we can only give limited advice.  But now.

  -Each clip is saved to its own level of gain.  Some are recorded louder than the others.  0 dB means simply the level of this specific "native" clips  The gain setting on all at-6 change each clip-6 dB, it doesn't make them not all limited to-6db.  This is called a limiter filter.  So, if you want to limit each clip compared with - 3db (never press 0, stay below to about - 3 dB max), apply a limiter.

  -Do not rely on the airwaves of the timeline, they are not absolute, but relative approximations.  Go by the counters, and then by the ears.

  -Compressor filter would go a long way to limit upper and lower levels, both win.  Where a limiter limits only the higher gain level.  Beware, a compressor to reduce the dynamic range.  This means that the quiet parts and hard parts approach is at the same level, which causes an artificial sound production.

  -For the application of filters for all clips at once, with the same settings, apply to the first clip.  Copy this clip.  Select all the other clips in the timeline panel.  Use the paste attributes to put in all the other clips.  OR, put all the clips in a compound Clip, apply your effects, keyframes, filters for this compound, to all media at the same time.

  -Actually, a professional like me, takes time to work each clip, or absolute similar clips individually, groups for best results.  Any button 'make fast all at once' will achieve inferior results.

  -Here is a link to the logic manual that explains all the audio effects that are both logic and Final Cut Pro X.  Some very good information here.

  http://help.Apple.com/LogicPro-effects/Mac/10.2.3/

• I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1. Still no sound.

  I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1, but still no sound in clips. Not even on the old files that are used to work.
  

  Bfun

  What operating system is running your first items 12/12.1? Can we assume that this audio reads OK

  on the same computer when you use a computer independent of Premiere Elements drive?

  What are the properties of these clips that have worked before, but don't know regarding sound

  For now, I will assume that you are working on Windows 7, 8 or 8.1 64bits.

  Have you checked the settings change preferences/Menu/Audio ASIO hardware? You have all 3rd party audio devices integrated in your IT environment?

  Please delete the Adobe Premiere elements Prefs file and, if it does not, then all 12.0 folder in which the Adobe Premiere elements Prefs file exists. Is the path to 64-bit Windows 7, 8 or 8.1

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  12.0

  and in the 12.0 folder, is the file Adobe Premiere elements Prefs that you delete. If this does not work, then delete all 12.0 the folder in which the Adobe Premiere elements Prefs file exists. Make sure that you work with the Option "Show hidden files, folders and drives" of the current folder so that you can see the full quoted path.

  You have the installation files or the installation disc with the serial number purchased in case we need to use to uninstall/reinstall?

  We will follow your track to the top.

  RTA

• Melted how audio and keep the audio level in clips later

  I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

  What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

  In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

  In PE10, there is a sequence of keys which allow this behavior?

  If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

  I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

  Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

  

  Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

  In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

  Good luck

  Hunt

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• change the zoom level as IE

  How to change the zoom level as IE?

  This has happened

  Each time Firefox opened

  is n/a

  Extension of the default Zoom level:
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• Audio level adjustment

  REALLY? ON THE FIRST GENERATION OF THE F5/55, GO TO THE MENU INSIDE TO ADJUST THE AUDIO LEVELS.

  COME ON SONY... DIFFICULTY THAT!

  I got imagaine; Press the button to THE / TC, select channel 1 or 2, and then use the select button to adjust the levels. Please don't not black the viewfinder/HDMI, display sup - sdi with an overlay of menu based on what is happening if we can adjust levels while driving. Side panel only if entered with the button to THE / TC, overlay menu if entered in the menu. The two up-down assignable button is a good idea, make an option, not the only way to control.

• To increase the audio level?

  Hi, I would like to know how can I increase the audio level of the level of 12db maximum in final cut pro x? Can I duplicate the audio track? If so, how can I do that?

  Thank you.

  UUse function audio loudness have been made. Wisely.

• Audio level of the Voice-over element does not match level of audiometers

  I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

  But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

  But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

  So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

  Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

  Tom B.

  Occasionally, I had this problem.

  The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

  Try to play the clip/s in question backward.

  I remember that DV is an offender of this audio oddity.

  Can you tell us what are the specifications of the clips?

  As much as I know this problem is not resolved.

  Al

• How can I change the audio track on netflix

  I have the new Apple tv 4. How can I change the audio track on netflix?

  Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.

  Thanks in advance

  If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.