Last update has screwed up to connect to the IMAP server.
The last update for Thunderbird seems to have changed something so that the connection to the IMAP server. All new messages downloaded but have not read a 'Loading Message' in the status bar. When it finally disappears content downloadable (web related) does not appear. In addition, I can send is no longer emails. The server times out. Worked fine yesterday.
To diagnose problems with Thunderbird, try the following:
- Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX
- If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.
Tags: Thunderbird
Similar Questions
-
"Could not connect to the IMAP server.
I have Apple iCloud and other e-mail addresses in the e-mail client application. From this afternoon, none of them work - see the message object.
In addition, my iPhone and iPad Mail suffer the same problem, but intermittently. My Mac Mail is all the time.
- I left him and restarted the app, but without success.
- Without success with the connection doctor (which somehow ' Mail is used the *' to work sometimes ").
- Unsuccessfully to find other threads that solve this problem, because it is not just a mail to iCloud one.
Please notify.
Send and receive e-mails of troubleshooting
Troubleshoot sending e-mail messages
-
my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
Once iTunes to work properly, you should be able to fix your device.
TT2
-
Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify
Yes I have FIOS Media Manager installed, but I've done since the start of Windows 7. For the first week or so it does not start on my download restarts. It started with this Nov 3 update from Microsoft. I went to downloads and there were two of them; Update for Internet Explorer 8 for x 64 based and updated Windows Defender definition.
After you install these two updates on restart FIOS M.M. was live at startup and my favorite MSN have disappeared. I disabled FIOS M.M., but somehow, he has been activated with this download. I went on my drive external backup and recovered the Favorites but am always intrigued by this phenomenon and how it changed my registry.
-
* Original title: look for the updates ms7
My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02. Since 14 June I repeatedly ran checks the updates, but these controls are never successful as never - end research I just saw the "check updates" message, but the check never ends. Why is this?
The Windows Update client cannot manage a KB3161664. Download and install it manually in advance. Links provided here:
Be sure to not do a search running in background.
Best regards, VZ
-
The last update has slowed my editing process in first Pro CC (Speedgrade must now restore the color? After the Animation effects, files have "without Audio or video?) Can I re - download the latest version?
I'm moving this to the Premiere Pro user forum so experts there can help you.
You can also see:FAQ: how to install previous versions of creative cloud applications?
-
After the last update of windows, I now shadows behide the fonts & photos
After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?
Hello
What is your Windows operating system?
Right click on my computer
Select Properties
Select advanced system settings
Running, click on the settings button
Uncheck show shadows under menus
Disable shadows decline of use for the desktop icon labels
Click on apply, Ok
Click OK
-
Whenever I install automatic updates, I can no longer connect to the internet.
Whenever I install automatic updates, I can no longer connect to the internet. I perform repressive restore, this solves the problem, until the next update. It already has cost me over $ 300 and now I can is more updated windows if I want to keep my internet connection?
Hi Beverly,.
Welcome to the Microsoft community!
After the description looks like after installing the updates you can't access the Internet. We need additional information about this problem. Please answer these questions to help you best:
1. What antivirus do you use?
2. what happens when you try to connect to the Internet after installing updates?
3. the updates are installed on the computer?
Provide us the details of the update that you have installed.
For more information, see:
See the Windows updates are installed
Method 1:
After you install the updates, check if you are able to connect to Internet in Mode safe mode with networking.
Step 1: Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
Check out this link to start safe mode:
Start your computer in safe mode
More information on:
Startup options (including safe mode)
Step 2: If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, followstep 3in the article by putting your computer to normal startup.
In addition, visit these links and try the steps listed in the link provided and check if that helps.
Windows wireless and wired network connection problems
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Hope this helps and provide us more information if you need more assistance.
-
IPad no charging current after the update to IOS 10, when connected to the laptop.
My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.
PL suggest how to overcome this problem.
Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support
-
MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?
Now its all ways stuck not only type
-
Update iPhone 4s to 9.2.1 says: impossible to verify the update, you are no longer connected to the internet. But I am connected by wi - fi and I get an email on the phone. My existing operating system is 6.something.
Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.
If that doesn't work, try updating through iTunes on your computer.
-
I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.
Thand you
same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad
-
Xperia SP C5303 after 4.3 update cannot connect to the proxy server where I have no proxy
I did the upgrade and now I can't use all the google apps, more a few others and the message is that I am unable to connect to the proxy server where I have no proxy server. I have just a modem normal wifi Adsl.
It happens also in 3G. I can't download new internet settings if it is of no use.
Any suggestions? I'm not a guru of Android so please try to help?
Apps not working not are Facebook, YouTube, Twitter, Chrome, cards, play store.I found the solution. Start the PC COMPANION and find REPAIR that will install the UPDATE again (just follow the instructions) I hope that this time will be better. Worked for me and now mobile is allowed. A factory reset only I believe.
-
Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]
Here is a list of the ports/areas to the whitelist to access the DPS Server problems
-
invoke VMScript unable to connect to the remote server
I have two PCs, two win 7 x 64. PC1 has powercli 5.5 build 3142196 (5.5u2?) and the other who has now updated 6.0.0.7857 (last AFAIK) via VMware PowerCLI - 6.0.0 - 3205540.exe from the downloads section.
On PC1, I can run the script
invoke vmscript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vmware * "'-ToolsWaitSecs 45 - VM VMName - guestuser guestacct - guestpassword blablabla".
and it works very well and gives me a result.
If I run the same command on PC1, I get the error:
Invoke-VMScript: 16/11/2015-18:32:01 VMScript Invoke cannot connect to the remote server
on line: 1 char: 1
+ Call VMScript - ScriptText '(gwmi_win32_computersystem).manufacturer - like ' * vm...»
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [invoking-VMScript], ViError)
+ FullyQualifiedErrorId: Client20_VmGuestServiceImpl_DownloadFileFromGuest_DownloadError, VMware.VimAutomation.ViCore.Cmdlets.Commands.InvokeVmScript
Anyone encountered this before? I see no difference in the PC it would cause and I wonder if there are logs, etc. for troubleshooting, I'm not aware of. The message is a bit lacking in detail. Probably the client must connect something.
Thank you!
The client when you run the Invoke-VMScript cmdlet on must actually be able to connect to the physical ESXi host on which the virtual computer runs on port 443. Are two clients on the same subnet, you have a firewall between the hosts and guests? Just try to open the ESXi host welcome page in a browser from these two clients, e.g. https://myesxihost.local/
Maybe you are looking for
-
Installation of the incorrect firmware on 48L1453DN
I update the firmware on my TV with the wrong file (to other model 48l1443dn) and the TV now have the led flashes green and red lights... Its dead...You need the right firmware? How can I unbrick TV? THX
-
I try to install active directory in windows server 2003
I tray to install active directory in windows 2003 server and I get the message the operation failed because: File Replication Service: the dependency service does not exist or has been marked for deletion. "The dependency service does not exist or h
-
Generic Host Process for Win 32 Services
In the last 2 days, my system lost sound through internet browsers and began to display the error msg above when I close / restart the system. I tried to reinstall a device driver but cannot meet the assistants that the desire for the location. I t
-
Vista wireless slowed after Windows update
The operation wireless computer laptop HP Pavilion of my wife was slower than fishing for a month of October or November Vista update. He was always pretty slow but now is horrible. I tried many fixes, updates to the wireless card, hit the Max perf
-
A point of access for different networks
Hi all I need to use an access point in several places: my house, my gf, my office. I intend to use the same device for all 3 places. My problem is: 3 local networks have different configurations (192.168.1.x for two, 192.168.0.x for another and the