Last update of Windows 7.6.7600.256 Agent fails to install every time!

Similar Questions

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• Windows XP Service Pack 3 (KB951376) trying to install every time but fails

  Original title: WINDOWS XP UPDATE or some TIME HAVE to ASK INSTALLSP3 (KB951376) WHENEVER ILS in FAILURE HOW can I STOP ASKING or HELP in INSTALLING SP3

  HOW TO COMPLETE AN INSTALLATION OF SP3 FAIL

  Hello!

  If the current version on your computer is SP2 and it fails when it tries to update, try to install SP3 manually get service pack 3 of this link:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  You may need to rename the catroot2 folder and the software distribution folder, first if the installation of the sp3 above failed
  Follow this:
  How to rename the catroot2 folder:
  At the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 oldcatroot2

  net start cryptsvc

  output
  How to rename the software distribution folder:
  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv
  output
  Hoe this helps
  Please come back if you need assistance
  Thank you
  Makoi

• Sansa Firmware Updater fails to install every time...

  I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...

  I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.

  Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).

  Any help would be appreciated. Thank you.

  SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).

• Update error 646 microsoft office onenote bk980729 fails to install every time I stop.

  Whenever I close I get the message below don't close microsoft is to install updates. I now have about 10 KB980729 showing faulty to my update history. with the error 646. How can I get this problem? Are these update for Microsoft Office Onenote 2007

  Manually download the update and install the same.

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB980729&displaylang=en&sType=s_basic

  A more permanent solution may require the Office relocation/repair a Note (which would require the original as well as the product key media).

  The current solution for the updates Office fail with 646 is to download and install the same manually.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows update 7.6.7600.256 agent repeatedly fails, turns off automatically updates then crashes on a loop, between insatll and updates

  the Windows update for vista 7.6.7600.256 agent attempted to repeatedly update fails.  I used the fix it app and how many resources can find your site, on the chance.

  Frustrated, please help.  I go to the update and it says to install the new agent to update so, I can receive the updates, close the window then after 30-40 minutes updates automated message disabled, so turn it back on and still does not work.  Several times after I click on install new update agent he schecks for new updates and I have a backward loop to the installation.

  Help, please!

  Thank you

  Hi Larrygrybos,

  ·         You receive an error code or error message for the update failed?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to manually download the Windows update client according to the edition of the operating system 32 or 64-bit:

  32-BIT downloads: http://go.microsoft.com/fwlink/?LinkId=178959

  64-BIT downloads: http://go.Microsoft.com/fwlink/?LinkId=178960  

  You can also see the following article for more information:

  Windows Update Error 80004002

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80004002

   

  Method 2: I suggest that you put the computer in a clean boot state and try to install the update.

  You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 3: If the method above doesn't help then try steps listed in the following article and verify.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if that helps.

• Why isn't my Windows Update Agent update to version 7.6.7600.256 as KB949104 says it should?

  OS: Windows XP Professional SP3

  They have recently tightened the Windows UPDATE agent to treat the virus of the flame by the update to version 7.6.7600.256.

  Of KB949104...

  -------------------------------------------------------------------------------------------------------------------
  How to obtain the latest Windows Update Agent if Windows Update or the automatic updates is enabled, the latest version of the Windows Update Agent will be automatically downloaded and installed on your computer. If you go to Windows Update until it is installed automatically, you will see a message to install the Windows Update Agent:
  -------------------------------------------------------------------------------------------------------------------

  I visited Windows Update et.256 is not available. I currently have 7.4.7600.226.

  I also did an experience in a virtual XP machine:
  I drove in arriere.226 to what comes of the actions on XP SP3 and WU then visited. 226, which was not installed pas.256.

  I also have a Windows 7 running in a virtual machine and one notices not to come through, but this guy doesn't.

  Also, why isn't the redistributable not offered by download? Those of us who do CDs unattended need.

  -------------------------------------------------------------------------------------------------------------------
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256). Here are instructions on how to get the version of the Windows Update Agent 7.4.7600.226.

  -------------------------------------------------------------------------------------------------------------------

  Of http://support.microsoft.com/kb/946928

  Looks like they finally leave the valves on that. My Google for the keyword 7.6.7600.256 alerts has been non-stop for the last 24 hours. All my systems to update recently.

  I really doubt that they were not shut down at the same time to lighten the load on the servers since a patch work Tuesday them probably 1 million fold more difficult.

• Last updated on Windows 7 cause "Crash Dump" on my computer.

  Last updated on Windows 7 cause "Crash Dump" on my computer. Watch journal update KB2264107 and KB2454826 will not settle. I do a system restore to get back. I tried the "auto update" three times.

  
  KB2454826 was fired shortly after its initial release, January 11, 2011. Revised (for example, fixed) versions of KB2454826 have been re-published February 8, 2011.

  NB: KB2454826 is an update Important/recommended, it's always an option, not the security update (from this edition). That being said, we now know that KB2454826 is a prerequisite for the update for IE9. As it will probably be a prerequisite update for SP1 of Win7, too, you probably don't want to hide.
  

  KB2264107 is an option, not the security update. Feel free to hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Last update of Windows XP and SVCHOST. EXE problems?

  Hello. My PC runs XP SP3 (HP Media Center) 3G of ram. It worked very well lately without any problem whatsoever. This morning I started as usual. I noticed the familiar Microsoft Update 'yellow shield' in the lower right of the task bar. I flew over the mouse over it and it read "download updates 0%. He never got above zero (or I couldn't open Update window). I pulled up the Manager tasks and SVCHOST. EXE has been hogging 99% of my CPU. I have everything closed and stopped and restarted. After the reboot (thinking it was a problem of Windows Update), I went on the Microsoft Windows Update site and clicked on 'Express' updates to try to update manually. He began cycling (search?) updates and soon SVCHOST. EXE, roared back to life and pegged the CPU at 99% of use (effectively maxing out the CPU at 100%). Page Update MS has never reached the point where it stated that I needed updates... He kept just cycling and research. Once the SVCHOST. EXE is happening (I tried this update 3 - 4 times today) it does not stop (if I close the window of Windows Update or not). I need to stop and restart. When I stopped, I see a prompt "end program" for RUNDLL. EXE that (when I try to 'end') translates into a prompt "unresponsive". I have to leave the program to close. As a precaution I've scanned with MSE, Malwarebytes, Spybot and SuperAntiSpyware and all were clean. No problem with MS Security Center is. I never saw my computer behaves like this before. At the time of this post, it seems fine except when I try to update on the Microsoft Site. Is there a bug or a problem with the last update?  Any thoughts appreciated. Thank you.

  Install KB2846071 for IE version 6: http://www.microsoft.com/en-us/download/details.aspx?id=39519
  Or update IE 8 version: http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  New info: the best way is to KB2870699.  He has the problem with high CPU.
  http://TechNet.Microsoft.com/en-us/security/bulletin/MS13-069

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• After the last update of windows, I now shadows behide the fonts & photos

  After the last update of windows, I now shadows behide the fonts & photos. What has caused this & I can fix it?

  Hello

  What is your Windows operating system?

  Right click on my computer

  Select Properties

  Select advanced system settings

  Running, click on the settings button

  Uncheck show shadows under menus

  Disable shadows decline of use for the desktop icon labels

  Click on apply, Ok

  Click OK

• Last update of Windows 7

  The last update of Windows 7 is installed automatically on my pc in the last days. After the reboot, the Internet Explorer connection is blocked. A system restore is necessary to return to the operation. There must be a mistake in the last update.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• Windows updates are installed every time I shut down the computer.

  Original title: updates that won't go away

  I don't think, every time, every day, that I stopped there are updates installed, it's true.  can someone tell me why?

  comp going crazy?

  Hello
  
  1. the updates have been installed? You can check this in update history.
  Check if the same updates are every day. Send back the same.
  Try to rename the software distribution folder and check.
  a. Click Start, type services.msc.
  b. press ENTER.
  c. right-click on Automatic Updates service.
  d. click stop. Stopping the service will take a moment.
  e. click on the Start button, type %windir%\System32 and then on enter.
  f. rename the folder "C:\Windows\SoftwareDistribution" (say, SoftwareDistribution.old):
  g. Click Start, type services.msc.
  h. click OK.
  i. right click on Automatic Updates service.
  j. click Start.
  k. starting the service will take a moment.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]