last updated causes a loss of mts compatibility

Similar Questions

• Last update caused service ip to stop working

  "Since my last update of Windows (3 days ago), I am constantly the error ' IP Helper has stopped working".  I searched the forums, but nobody else seems to have reported this problem.  The update of windows made 6 updates, so I don't know which one it was that caused the problem, or to cancel.  Took me to warn me of updates so I can review them before installing windows.  There was nothing unusual in the updates.

  me. Mac,
  You can stop the service and then test your machine. The service performs the following operations: provides tunnel connectivity using IPv6 transition technologies.  It is not used by most users.  You can stop the service and verify that none of your internet use is affected.

  To stop the service, click Start > type 'services' in the search box and press ENTER.  Then in the Services window, scroll down to the IP assistance service, click it, and then click on the button "Stop service" (it looks like a square stop button and is located on the toolbar).

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Last update causing problems, it seems

  Since the last update my computer is almost unusable.  I have no access to my add/remove program to remove and not restore mode without failure or make access a system.  How can I get these updates on my pc!

  Hi Jofchicago,

  Thank you for visiting Forums answers to Microsoft Windows.

  What are the updates that you installed before that this problem occurred?

  If you have the number of the update, I suggest you to use spuninst folder of Ko and launch the spuninst.exe file to uninstall the update.

  I have some steps that may help you.

  Method 1

  Try to restart the computer in safe mode and check if works very well.

  To do this, follow the steps below:

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  For more information, see this link:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2

  If it works fine, perform a clean boot. Clean boot starts the operating system by using a minimal set of drivers and startup programs. A clean boot helps eliminate software conflicts.

  To manually start Windows XP with a clean boot, follow these steps:

  Step 1:

  Start the System Configuration utility

  Click Start and run, type msconfig, and then click OK.

  The System Configuration Utility dialog box appears.

  Step 2:

  Configure selective startup options

  In the System Configuration Utility dialog box, click the general tab, and then click Selective startup.

  Click to clear the process SYSTEM. INI file check box.

  Click to clear the process GAIN. INI file check box.

  Click to uncheck the box load startup items. Check that load System Services and use Original BOOT. INI are checked.

  Click the Services tab.

  Click to select the hide all Microsoft Services check box.

  Click Disable all, and then click OK.

  When you are prompted, click on restart to restart the computer.

  Step 3:

  Log on to Windows

  If you are prompted, log Windows.

  When you receive the following message appears, click to select the don't show this message or launch the System Configuration utility when Windows start check box, and then click OK.

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click on start and then click Run.
  2. type msconfig and click OK.
  3. the System Configuration Utility dialog box appears.
  4. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  5. When you are prompted, click on restart to restart the computer.

  For more information, see this link:
  http://support.Microsoft.com/kb/310353

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CC was last updated caused brush lag on all versions of Photoshop.  How can I fix?

  Since the update of last week at CC, I noticed a decrease in performance on all versions of Photoshop, I installed, CS6 and CC.  Many of the brushes I by default Photoshop and my own custom sets, lag horribly at the establishment.  My system didn't already have this problem that I can tell.  Just to be sure, I tested Photoshop on other versions, a macbook pro and a near top of the line PC.  The lag occurs on all systems.  I tried drawing with just the mouse and the Cintiq 12WX and responsiveness is the same.

  For the reasons of this case, here are the specs of my main work computer.  All the drivers are up to date, as is the operating system:

  Processor: Intel Core 2 Quad CPU Q6600 2.40 GHZ

  RAM: 8 GB

  Operating system: Windows 8 (64-bit)

  Graphics card: AMD Radeon HD 6700 Series

  Hard drive: Samsung 830 256 GB Solid State (where my player scratching's)

  Monitor: 2 X Dell U2410

  I tried to change the settings of OpenGL and disabling altogether on all generations, including this one. There is no change in the shift of the brushes.

  Full for clarity, here is high near the line of PC specifications and the Macbook, which both had the same questions:

  The PC:

  Processor: Intel Core i5 3570K 3.4 GHz overclocked to 4.4 GHz

  RAM: 16GB DDR3 1600 MHz

  Operating system: Windows 8 (64-bit)

  Graphics card: 2 X EVGA Nvidia GTX 670 4 GB SLI

  Hard drive: 2 X Samsung 840 Pro 256 GB SSD, Raid 0

  Monitor: 27 "Cinema Display from Apple

  MacBook Pro:

  Processor: Intel Core i7 2.7 GHz

  Operating system: OS x 10.8 Mountain Lion

  Hard drive: Western Digital 500 GB 7200 RPM

  Graphics card: Nvidia Geforce 630 M

  I also tried to uninstall completely and re-installing Photoshop CS5 and CC on my work computer, which still has not resolved the problem.

  I'm a freelance artist and this sudden loss of performance puts a cramp in my time and possibly in my income stream, if I can't solve this problem quickly.  Please advise!

  Well, after a completely useless tech support call, I managed to fix it myself by checking the attributes of each brush dragged one by one.  As far as I know, almost all troublesome brushes share the attribute of having their game of spacing to 1%.  Change the spacing of a higher percentage setting the lag helped tremendously.

  I downloaded a video illustrating my lag issue, but also the solution. I hope this helps someone else to be the same issue:

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• Updates, caused the loss of internet connection

  For the second time this year, after a Microsoft Update on my netbook Windows XP Home, I lost my internet connection. Two courses (June) updates involved are KB2518864 and KB2478658. I tried to restart the computer once or twice, and I still didn't have a connection. I did a system restore, and the internet connection is back. No idea what's going on? (Yes, I know, Robear, that it is wrong to use the system restore, but it seems to do the job.)

  I have tried to have reported the problem to Microsoft but had someone who did not speak English very well and was indifferent to the problem. When I said that the restoration of the system got the rear connection, he said, "so what do you get? He added: "We recommend you to install all the updates." I said it wouldn't do me any good to have the updates, if I could not then use the computer. He said that he would report the problem - but he was not asking for any personal information, and I don't have a file number.

  Another question: I installed all the high priority Patch Tuesday updates June, Thursday, June 16 - and told me that everything downloaded and installed OK. I have been informed (by the yellow shield) on the two new updates on Saturday, June 18. No idea why these two pointed to the end?

  Finally, I need these two updates (they are for the .NET Framework) if I'm not a programmer?

  Thank you!

  JO-Anne

  JO-Anne

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2518864

  KB2518864 has a few known issues
  http://support.Microsoft.com/kb/2478658

  If you do not you leave your system vulnerable. If you lose your internet connection, you can remove if Add / Remove programs in Control Panel.

  Hide and not install it leave you vulnerable. I would try one at a time. If you lose your internet connection remove the cause of the problem. It is always useful to restrict the domain where the problem lies. Get even one reduced the vulnerability of your system.

  You brought up an incident report. You will have more information we hope to get the update problem problem solved...

  I would not bother to Robear. His behavior is sometimes irrational.

• Last update causing error in system memory

  I just ran the update on my iMac and have the death rotation color wheel!  The system is out of memory the application twice!

  I have an iMac 27 inch late 2009

  I can't get anything to work, and the system has installed 16 GB.  I had a similar problem with Mail eat all the memory the application when I did an update in December and now it's happening again.

  Help, please!

  Dead in the water.

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Since the last update, windows Explorer (start bar, windows, etc.) won't start when you wake up from sleep.

  17/09/2012

  Since the last automatic update, my laptop won't automatically sleep when the lid is closed. And when opened the lid of his sleep, there is no current windows; No start bar, no application. So all I can do is ctrl alt del or start L so I can restart my laptop.

  I think that the last update caused this, since there was no prior dysfunction. .

  popular considerations. .

  JLL

  Notice: I discovered that the problem was not caused by updates, but by instant replay. Disregard this message...

  Thank you.

• Last updated on Windows 7 cause "Crash Dump" on my computer.

  Last updated on Windows 7 cause "Crash Dump" on my computer. Watch journal update KB2264107 and KB2454826 will not settle. I do a system restore to get back. I tried the "auto update" three times.

  
  KB2454826 was fired shortly after its initial release, January 11, 2011. Revised (for example, fixed) versions of KB2454826 have been re-published February 8, 2011.

  NB: KB2454826 is an update Important/recommended, it's always an option, not the security update (from this edition). That being said, we now know that KB2454826 is a prerequisite for the update for IE9. As it will probably be a prerequisite update for SP1 of Win7, too, you probably don't want to hide.
  

  KB2264107 is an option, not the security update. Feel free to hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The update to IE 8 last night caused the menu and other bars to turn black in the browser.

  the update of IE 8 last night caused the menu, Favorites bar and the other bars on the top for black.  I uninstalled the update and the bars were all normal.  I went to Winhdows updated and reinstalled IE8 update and the bars are again showing only a small icon where each item is black. I am running XP.  What can be done to fix this?

  Hello

  1. What is the number of KB updates that are at the origin of the problem?

  I suggest that you check the number of KB updates that have been installed recently.

  There is no history of update for Windows XP; but you can see what updates you have installed on your computer by clicking on add or remove programs in Control Panel.

  To see what updates you have installed on a Windows XP-based computer, you must go through a different process.

  (a) go to the start menu in the lower left corner.

  (b) choose Control Panel from the menu.

  (c) find the icon Add / Remove programs and double click it to open it.

  (d) a list of the installed programs. To see Windows updates put a check mark in the Show updatescheck box.

  (e) now, you will see also all the updates that are on your computer.

  Please provide information on the update installed that could be causing the problem so that we can better help you.

• Updates 2478658 KB and KB2518864 could not install and cause a loss of internet connectivity

  Hello

  Updates KB2478658 and KB2518864 cannot be installed in my SBS 2003 and caused a loss of internet connectivity.

  A while ago, I had a similar problem, i.e. do not install and loss of internet connectivity after you apply Windows Server 2003 SP2 on SBS. In this case, we have solved the problem with the support of a Customer Support person Microsoft, a service through which we paid.

  According to the suggestions that I found in the Microsoft Web sites, I managed to remove everything that was installed by the KB2478658 and KB2518864 updates and the reinstalled successfully. I did these manually because I don't have an internet connection.

  After you have reinstalled the above mentioned security updates, I repeated all the steps that led to the problem of the previous time. Among the steps taken, have been indicated in:

  Common problems of networking after you apply Windows Server 2003 SP2 on SBS

  http://blogs.technet.com/b/SBS/archive/2007/04/24/common-networking-issues-after-applying-Windows-Server-2003-SP2-on-SBS.aspx

  2. 948496 an update to turn off default SNP features is available for Windows Server 2003 and Small Business Server 2003-based computers

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 948496

  Unfortunately, I was unable to restore connectivity to the internet this time.

  There is connection between the NETWORK card and router. I could ping the NIC IP address, but not that of the router (I get an "unreachable" message).

  I look forward to suggestions and recommendations to solve this problem. I have already paid once resolved a problem that was not directly caused by me and do not wish to do it again.

  Thanks in advance.

  JL

  Hi JL,.
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to a problem with small business server. It should be better in the Windows Server Forums of business.

  Please post your question in the Windows Small Business Server Forums.

• The night last update (May 11) caused my system to crash after re-booting.

  The night last update (May 11) caused my system to crash after re-booting. There were 4 updates that have been selected.  I've disabled the automatic update (will always to down load) and hidden updates (KB905866, KB890830, KB2509470, KB2536413). Otherwise, someone with this problem and know who is "bad"?

  The OS is Vista Ultimate, and until today, I was downloading/automatic update.

  Hi Mike,.

  Method 1:

  I suggest you to configure your system in clean boot mode and install each update on your computer. You must follow step 7 in the link to restart the computer in normal startup after the problem is resolved.

  Try to perform the update of windows and try to install an update at a time and check

  Restart the computer after the installation of each update.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 2:

  Try to manually install the update, an update at the same time by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  If the problem is not resolved by any of the methods mentioned above, you can check the link for the problems with the installation of updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Last update and security patch is causing my Sony Vaio suddenly Crash

  

  0
  I settled on the recommended automatic so I was not really expected a nightmare when instead of clicking the close option as usual, I pressed the power option keys which allowed the last version of Windows including the new security patch must be installed updates to Windows. When I tried to power my laptop again once he would only start for a second before turning off suddenly. He did this several times with the switch off the coast so sudden that I first thought it was a question of power, but what repair Windows came, he had a well-posed power my first thought.  The first repair attempt has not fixed the problem then the laptop restart cut again randomly during the boot. After several attempts to turn on, Windows repair came on once again, but in this case after ten minutes of "trying to fix" she came back with the result that it could not. However, I had the opportunity to do a system restore that seems fortunately to have worked. I am however faced with the problem of Windows once more want me to update my system. After what happened before, I'm not want to do. Is there a way around this so that this update and patch will install not or that can be installed without the nightmare of him causing the laptop repeatedly crash after.

  Change the way you receive updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• loss of functionality since the last update

  Since the last update of Mozilla a few days ago (Mac) I noticed at least 2 items that I used to use regularly lost features:

  1. used to be able to rearrange bookmarks by drag-and - drop (bookmarks-> show all bookmarks). Is no longer able to rearrange except manually and paste laboriously

  2. used to be able to click on download arrow in the toolbar to see the progress of downloads. Click no longer works. Now, cannot see download progress by (Tools-> downloads) pop-up menu.

  And no, the mouse works fine, can click on other things and drag and drop photos etc very well. Please notify. Thank you!

  Already restarted the computer since this issue started?

• Envy 15: Loss of Beats Audio control panel after Windows 10 last updated

  Hello

  Does anyone know if the Panel Audio Beats will be available again?

  After the last update to Win 10 I lost the control panel and also my Bass speaker didn't work on the external speakers. Finally I sorted out the problem of speaker by selecting another driver in Device Manager.

  The most recent update to Win 10 was 1607.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K