Latest AIR to support the desktop GPU mode?

Similar Questions

• Satellite A80-P440: is BT supports the A2DP profile?

  Hi, as seen in the title of the post, I have a laptop of A80-P440 and it interests me using the A2DP profile, but I'm not sure at all, this notebook can do? I know it's built-in bluetooth, but I can't seem to connect with the music devices.

  No idea how I can configure the profile, or not at all? Thank you!

  I think that this article is a problem. Latest toshiba battery supports the a2dp profile, download the last stack and then you can add new devices/pair it. Http://aps.toshiba-tro.de/bluetooth/pages/download.php is a link on google

• ADF supports the support database in mode offline, such as Adobe Air, or gear

  ADF supports the following model.
  
  Application supports local database storage which can synchronize with a main oracle database when it is available?
  Something like adobe air or google gears?

  For a Web ADF faces application there is not built based on such. You can run the entire stack of ADF (middleware and DB) on the local computer, and then use DB synchronization service to synchronize.
  Or you can opt to apply for ADF Swing base which can connect to a DB either local or remote client.
  ADF Mobile Client, currently runs on mobile devices and not through a web browser.

• Arrow cursor freezes on the desktop to start OK in safe mode

  Compaq Presario laptop.  Windows Vista SP 1. Touchpad

  My wife's cell phone goes through a normal startup and about 5-10 seconds after the desktop appears, the arrow cursor freezes in its previous location.  It will not move.  It apppears that touch screen turns off.  To turn off the computer, I pressed the power button.

  When I start in safe mode the touchpad works very well.

  I reinstalled the driver touch screen safe mode ATP.  No joy.

  This has happened in the last two days.  After it happened, I did a full scan with a Norton freshly updated in safe mode.  Only a minor tracking cookie has been found and fixed.  The problem has not disappeared.

  Do I have to restore full or is it just a simple fix?

  Hello

  Two methods:

  1 try a restore of the system back to before that happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -----------------------------------------------------

  2A. What antivirus/antispyware/security products do you have on the machine? Be one on which you ALREADY had
  This machine, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  -----

  2 B follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  2 C. After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  2. D Vista and Windows 7 updated drivers love then here's how update the most important.

  It's my generic how updates of appropriate driver: (include reinstalling the drivers for the touchpad).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• Center help and Support using the desktop icon

  Office a700y Windows XP - pro. A new ' 05. Just tried to get thru to HP tech using the icon on the desktop for the help and support center. The only way to get thru is signon line through windows or msn. Try not to use a HP Application Recovery no chance.

  Click the icon on desktop-open HP help and Support center-Connect customer support - start a new request - fill out form - click on connect to a support analyst - I get a window showing the connection to the server required /HP Flash support is currently available try again later. Also tried services.msc/ru7n also HHCTRL. OCX/execute without result. Was on I / M with HP tech does support for 2 hours no luck with them to all the

  HopeIn' for some ideas

  Well, it seems that the HP program help and support is no longer supported for desktop computers. They always have for computers laptops/notebooks. Read to the bottom of the web page. Sorry to be the bearer of bad news.

• When I start my pc the monitor reads "mode not supported".

  unplugged my pc & MONITOR. When I plugged it back in & has tried to start it, it keeps reading 'mode not supported '.

  Hello!

  The pc is probably set to a resolution that does not support the monitor. Start in safe mode and set the resolution to the native wreck of monitors.

  To start in safe mode, you will need to press F8 at the moment of startup and select Safe mode.

  Let me know if that is not the case.

  Kind regards

  Joel

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• Can no longer access the Canon Remote Mode UI management (Portal) (on my desktop)

  I have set up the Remote UI Mode management Canon (Portal) access using my IPv4 address so that I could make changes to the settings of my imageCLASS MF6160dw directly to my desktop computer.

  Which has worked flawlessly for almost 3 months.

  Then, all of a sudden 3 days ago I started having this message: unable to display this page

  I have not added or removed any equipment or software in my desktop computer.

  I also confirmed that my IPv4 address was correct.

  And I'm trying to access the 'portal' several times at different times of the day and on different days.

  My computer is a Dell XPS 8700 Special Edition running Windows Pro 8.1 (64-BIT)

  How can I find the "portal"?

  I never got an answer from someone.

  But for those who see this thread & can also have this problem, I finally realized that the IP had actually CHANGED.

  How & why it changed, I don't know.

  But, the last 2 digits changed de.15 a.2

  I can now access the management UI remote Canon (Portal) Mode using the IP has CHANGED.

  Hope this helps someone.

• I need remote support to resolve a deadlock on my screen to display the desktop.

  I need remote support to resolve a deadlock on my screen to display the desktop. When I try to grant the permission I get message saying that I have no contacts.  apparently I need a support exxpert email address. How I not get that?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest you get in touch with support chat were we access the computer via remote control and solve the problem.

  http://Microsoft-Chat.com/

  Future prospects for more questions

• Is it safe to remove the desktop icons rest after a support session remotely Microsoft Tech Support?

  Hello everyone,

      Some time back I had experienced problems with Windows Update continually advising me the KB2538242 was ready to be installed.  After a lot of hassle, I finally got help from Support staff technical Microsoft through 3 sessions of Assistance to solve the problem remotely.

  At the end of the last session, there were several icons left on my desk. (A couple of the names associated with the icons are: desktop.ini & redistributable Microsoft Visual C++ MFC 2005).   Some are .exe files and some are presented as folders.

  My question: is there a way to HIDE these icons so that they will be displayed on the desktop, without actually delete files / folders / applications, icons are associated with?

  (I'd forgotten there is no way to attach a screenshot (jpeg file) from my office, so everyone could see the icons I want to talk).

  Thanks for your time and any clarification on this subject!

  Pete C

  Hi cpsi1,

  Thanks for posting your question in the Microsoft answers community.
  It is safe to delete the icons stored on computer support.

• When I bring my computer off "sleep mode", I don't see any icons on the desktop, that my background image.

  original title: malfunction of the sleep...

  When I bring my computer off "sleep mode", I don't see any icons on the desktop, that my background image. I can't get back them, and the only thing to do is to give my computer a re-starting difficult.  I just bought this computer last year and fear that this hard-restart is damage. What the hell is happening? What is the point of having the "sleep mode" if it limits my activity once I re - enable the computer?

  Kill process > explorer.exe from the Task Manager.

  Copy a copy of explorer.exe from a stable machine fresh and clean.

  Paste in: C:\WINDOWS\

  Replace existing explorer.exe.

  Problem should be solved.

  If this is not the case, change the registry should be applied.

  No registry attached office file.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• Impossible to support the user's virtual desktop remotely

  Hello

  I have a few question unable to support the computer remotely using vWorkspace management console. I get error "the following error occurred while shadowing session 2 on server xx.xx.xx.xx, this function is not supported in this system (120).»

  There is no recent change made broker server and am able to do support remotely to the desktop of the user without any problem. Can someone help me?

  Thank you.

  Hi Whosen,

  It is essentially an issue with differences between RDP7 and RDP8.
  Although you mention that has not changed, is it possible that it is the use of RDP7 instances, but fails on Instances of RDP8 news? It could also be related to Server 2012 for example.

  It is covered in the following Technical Support article:
  [See:support.software.dell.com/.../105537:550:0]

  I hope that it is of little help?

  See you soon,.
  Dave Caddick