Latitude D810 PATA for upgrade of the SATA HARD drive

Similar Questions

• Install Windows 7 upgrade on the new hard drive?

  I have the Windows 7 upgrade version that I installed last September, but a few days ago my hard drive died.  How do we install the version 7 upgrade on the new hard drive without using a previous version of windows on it?

  In order to install the Windows 7 upgrade version, you must have a system of eligible operating Windows installed and activated.  You cannot install a version upgrade of Windows 7 on a drive blank.  The installation procedure you do not insert a Windows disk in the drive for verification, eligible operating system must be installed.

  If you do not have a qualification system of operating Windows installed with an activated genuine license, then you can not use the version upgrade of Windows 7 - you would need a license of Windows 7 "full version".

  In summary:

  1. a Windows operating system to eligible address must be installed.
  2. the Windows operating system to eligible address must have a genuine license (product key) and it must be enabled.
  3. to upgrade, boot on the eligible Windows desktop, insert the Windows 7 upgrade disc in the DVD player.
  4. when the menu appears, select custom (advanced option) to a clean install procedure.

  You should be able to repair the installation, if your installation one fall. I suggest create you a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to spare you the trouble if your computer one fall in the future.

  You can work around this two ways, I would suggest that you create a System Image (backup) of your installation of Windows 7 after installation of Windows 7 in order to save you the trouble if your computer loses the system failure or instability. Since you are in possession of a valid license of Windows Vista for this computer, you can use the following method to do a clean install with upgrade support:
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  How can I tell my catalog of lightroom that Ive moved my original files on a drive hard new, so it will apply all the settings for photos in the new hard drive

  Right-click on the folder name and choose the location of the update folder.

  See fig 8 to the attached link:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

• HP Compaq Desktop Mod CQ511OF: W7, using the upgrade on the new hard drive disc

  Hello everyone; The 5 years, 320 GB hard drive on my HP Compaq CQ5110F desktop model is tired and I would like to replace it with a hybrid drive SSD Seagate 1 TB. My concern is that this computer has been upgraded from Vista to Windows 7. The vignette, I placed on this computer that came with the disc to upgrade the readings; "Windows Vista HmPm - Win 7 HmPm UPG fill HP".  So my question is can I use the drive of W7 upgrade to install W7 on the new 1 TB hard drive, the 'system' will use the product code located on the sticker provided with the upgrade disk? The computer is supported up to 1 TB Seagate Backup Plus.  The computer is, bicoeur AMD 2.5 GHZ, 32 bit, 3 GB of ram. I would be happy to provide additional information. I appreciate all the comments really. Thank you very much for your help, Oscarmint

  You cannot use an upgrade disc to install an OS on a new hard drive.

  You could clone the old hard drive to the new hard drive using a program like Macrium reflect free

  http://www.Macrium.com/reflectfree.aspx

• HP ENVY 15 t-j100 Quad Edition: upgrade of the current HARD drive

  I have HP ENVY 15 t-j100 Quad Edition laptop which currently has a 1 to 5400 RPM HARD drive. I'm looking to upgrade to SSD drive and need help with the following responses

  (1) the laptop does support more than 512 GB since the laptop computer maintenance document lists (and does not) support max 512 GB

  (2) any 2.5 SATA 3 SSD should work with the configuration given my laptop as long as its not more than 9.5 mm thick. Please confirm.

  I was chatting and asking for a response for the last month 1 HP support and I have not received a positive response. Forums suggest that capacity any no where like the cat and people on HP customer service gave the following answer.

  The manual list only up to 512 GB because that's all there was when the laptop was sold or just would not be a market for the 1 TB SSD. Not too long ago, they were $7-800 and beyond almost anyone means. But there is no reason that your laptop can not run a 1 TB SSD. Also, you are right. All SATA 2.5 inch wide SSD will work as long as it's not more than 9.5 mm thick. These days, almost all of them are 7 mm. I would recommend a Samsung 850 Evo but there are a lot of good ones out there. We had a set of trouble on the series MX Crucial reports, however.

• Re: Satellite P775 program - 11 p and upgrade with the second HARD drive

  I know that you have a second HDD models, but ist it is possible to add a second HDD to my program P775 - 11 p?

  Because the place and the Bay is already there, only the cables are missing...

  Help, please...

  If there is no upgrade of the connector SATA HDD is not possible.

• Need help for upgrade of RAM and hard drive for HP Pavilion dv6-2130ej

  Hello.

  I have the HP Pavilion dv6-2130ej with windows 7 Home Prem OA system.

  1. I would like to improve my RAM from 4 GB to 8 GB memory.
  2. I would like to add another hard drive instead of CD space.

  Can you tell me please, what I need to change the card of 4 GB to 8 GB card or is there another place to add a 4 GB card more?

  In any case, I would like to get a memory card description that corresponds to my computer so I do not buy the wrong memory card. Characteristics of the witch, I do?

  Is it possible to add another hard drive to the computer instead of the Conference on disarmament and please tell me what parts do I need to buy and what is the maximum. Storage hard drive which may include my computer? There now 4RAM internal memory and 500 GB hard drive.

  I would like to make my PC as strong as possible because I use it for work with heavy programs editing and I need a lot of internal memory.

  Thank you for your help,
  Waiting for a response,
  You can contact me by email too
  [Personal information]

  Vira.

  Hello.

  I think you can install the drive and use your recovery disk to reinstall Windows.

  You can change the hard drive of your computer with a WD one Pavilion, just keep in mind that you need a 2.5 inch drive. In addition, if your Pavilion model is dv6500 or more, it has a SATA-II interface, but you can always take a drive SATA-III and it will not work (although will run at the lower speed of SATA-II).

  Here, you want to take a look at all our 2.5-inch drives:

  http://products.wdc.com/support/kb.ashx?ID=HzdPVS

  Hope this helps and let me know if you have any additional questions.

  See you soon!

• Why my windows 7 installed on drive hard Seagate IDE goes into blue upon awakening from sleep screen while everything goes well when I installed it on the SATA hard drive.

  I did a Chkdsk/f/r hard disk and no errors not found. Is it because of the incompatibility of your IDE hard drive with windows 7 or other?

  Hi Auggy,

  I could not roll back the driver for GIGABYTE GBB36X controller, instead, I uninstalled the driver and now the problem seems to be resolved.

  There will be consequences if I ever install the storage controller driver and what is the use of the controller driver?

  Thanks for the comments.

• Get the SATA HARD drive on ESXi

  Hello

  I just installed ESXi froma physical Machine and I have a lot on this disk configuration files. When I run: "fdisk-l".

  Partition table entries are not in the order of disc.

  Disk/dev/disks/t10. ATA___ST3250620NS___9QE757QQ: 250.0 GB, 250000000000 bytes

  255 heads, 63 sectors/track, 30394 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  Device boot start end blocks Id system

  / dev/Disks/T10. ATA___ST3250620NS___9QE757QQp1 1 7 56196 of unknown

  / dev/Disks/T10. ATA___ST3250620NS___9QE757QQp2 * 8 269 c 2104515 Win95 FAT32 (LBA)

  / dev/Disks/T10. ATA___ST3250620NS___9QE757QQp3 270 30394 241979062 + 83 Linux

  / dev/Disks/T10. ATA___ST3250620NS___9QE757QQp4 30395 30395 820 fb VMFS

  the disk so is there and workin, but this seems a little weird I tried to run:

  Mount-o rw 't10. ATA___ST3250620NS___9QE757QQp3 ' / MNT '.

  mounting: mount t10. ATA___ST3250620NS___9QE757QQp3 on/mnt failed: no such file or directory

  But no avalil.

  Any ideas please

  A simple example of using: http://communities.vmware.com/thread/176873

• HP Pavilion s5570t desktop computer: single SATA hard drive configured as RAID in BIOS

  Our small computer lab has two offices of Pavilion Slimline s5570t that we have recently upgraded to Windows 10. I noticed that in the configuration of the BIOS for the SATA hard drive, it is defined as RAID. I don't know why. The thing that brought this to my attention, is that the software Intel Rapid storage technology constantly shows about 25% CPU use and there high usage of the disk when computers start first which makes them unusable until the software installs.

  My question is can I change the setting of the BIOS SATA AHCI with no problems and that will solve the problem? The Intel rapid storage technology software version is v9.5.7.1002. It is obviously old and I could update, but I wonder if the real issue is the BIOS setting.

  Thank you

  JohnD

  Thank you for the additional information.

  I'm not sure it tells you, but I changed these settings without having to reinstall the operating system.  I suppose it could be correct.

• Stop error: 0x0000007b while trying to install Windows XP Home Edition on SATA hard drive.

  Original title: new hard drive Blues.

  got sata disk hard western digital 500 GB installed, I have tried to download winxp home, got a blue screen

  stop: 0x0000007b (0xF78D663c, 0xc0000034, 0x00000000, 0x00000000

  I need help

  Hi aqm0207,

  How you try to install Windows XP Home Edition?

  You may receive an error message "Stop 0x0000007B" in the following scenarios:

  (a) a device driver that your computer boot controller needs is not configured to start during the startup process.

  (b) a device driver that needs your computer startup controller is damaged.

  (c) It can also occur if the hard drive in the BIOS configuration is bad.

  You can check if the SATA hard drive is correctly configured in the BIOS (Basic Input Output System) & can also update the BIOS. If you are not comfortable to do, you can contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  You can also check this link:Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SATA hard drive: NOT DETECTED

  Hello.

  I am facing this problem for a few days. For a month I bought my Alienware 15.

  I boot it and all of a sudden I see the D-drive is missing. I get a notification that the SATA hard drive has been deleted. What can I do to fix this?

  Please answer as soon as possible

  I would like to try out the hard disk and place again.

  Right after video on how to perform these steps.

  Check if there is anything loose.

• Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

  You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340

• The upgrade on Pavilion 9667ea hard drive to SSD

  I think the upgrade my computer laptop 9667ea Pavilion by replacing the first hard drive of 160 GB with an SSD, as the Cruicial M500 240 GB SATA 111, or similar.

  Could you tell me if there are problems in doing this, because I see no other posted messages it may be according to the model of your laptop?

  I advanced and bought the SSD (Samsung 840 EVO 250 GB), which has been installed on the HP Pavilion dv9667ea. Everything went well and I used the Samsung software cloning with the SSD drive (I backed up the C drive beforehand). I have power and data cables, so I need just the package base. The new 250 GB SSD drive replaces the original 160 GB hard drive, I decided to take out the other drive so hard 160 GB. The laptop is much faster at startup and is also faster by using the programs on the laptop. As there are now no hard drives on the laptop, there is now virtually no fan noise, which was inconvenient.

  Thank you for your advice.