Latitude e7470 FHD ips?

Similar Questions

• Cannot get 2560 x 1440 on U2713HM via DVI - D of Latitude E7470

  I have a brand new Dell Latitude E7470 connected to a Dell E-Port Plus Advanced Port Replicator (model PR02X). I have the E-Port Plus, connected to 2 monitors - a brand new P2414H Dell via DisplayPort on Video 1 and a Dell U2713HM via DVI - D on Video 2 (see diagram below). Can I use two screens, but although the E7470 correctly identifies the U2713HM, it offers only as the highest resolution up to 1920 x 1200.
  According to the website of Dell and this forum, the U2713HM supports the complete resolution of 2560 x 1440 via DisplayPort * or * DVI - D (no HDMI), but even if it is connected to DVI - D, I can't put it in 2560 x 1440.
  Why is this and how to get the resolution full 2560 x 1440 via DVI - D link? As it is, it seems blurred and just awful.
  A little background extra. I have a setup of 3 monitor with the U2713HM in the middle and shared between the E7470 laptop and my office. I have my desktop connected to the U2713HM on the DisplayPort, so I can't use the E7470/E-Port Plus to the U2713HM DisplayPort. When I go to the U2713HM on the desktop on the DisplayPort, I get the full 2560 x 1440 resolution and it's fantastic.
  

  OK, no ports DVI on any Dell E-platforms will be higher than 1920 x 1200.

  Maximum resolution P2414H = 1920 x 1080
  Video of P2414H in ports = DP, DVI, VGA

  Maximum resolution of DP and DVI - D U2713HM = 2560 x 1440
  Video of U2713HM in ports = DP, VGA, DVI - D, HDMI

  The installer suggested =
  Docking station video 1 DVI out--> DVI to DVI cable--> DVI P2414H 1920 x 1080
  Video docking station 2 DP on--> cable of DP to DP---> U2713HM DP in 2560 x 1440
  Computer DVI out--> cable DVI to DVI--> U2713HM DVI in 2560 x 1440
  Exit desktop VGA--> VGA cable VGA--> Samsung 275 t VGA 1920 x 1080?

• Latitude E7470 external screens with Dock problems

  Hello

  I have a Latitude E7470 for work and when I started to use it with my docking station for external monitors, I was noticed a similar problem as grew up in the thread below. One of my two external monitors would be (seemingly at random) twinkle time or periodically to a point where he was distracted. In addition, I see the graphics card down several times after the publication of this kind of problems.

  

  I implemented the "fix" that has been bound (and marked as the answer to the thread) over lunch a week ago, and more things are unhinged from there. Basically, I'm at this point cannot connect to all external monitors through the docking station. I resorted to having one monitor connected via HDMI, but hardly conducive to the work environment and I would really like my monitor Setup several back (even with the problem of flashing, at least).

  Is it possible to undo the actions that I ran, or is there a fix more up-to-date for this problem?

  Link to the "difficulty":

  Any response and advice would be greatly appreciated. I really do not have to resort to obtaining a different style docking station (USB 3.0) if I can help.

  Hey all!

  The link:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=WNV4C&FILEID=3534260691&osCode=W764&ProductCode=latitude-e7470-Ultrabook&LanguageCode=en&CategoryID=VI

  Was just sent this by Dell Support.

• How to activate the change of Latitude E7470 Lan/Wan?

  We have just received 7470 s Dell in our environment, I did go to the power management in the BIOS and check the two boxes under Wireless Radio control, but I have it on the wired network and wifi is also related.

  How did you configure the RL/switching on these models? Y at - it a step that I missed? BIOS seems to be updated to the latest version more.

  Indeed!

  In the meantime, we found the solution.

  These BIOS settings need additional software for Windows work.

  After the installation of Dell WLAN Driver HotKey (http://www.dell.com/support/home/be/nl/bebsdt1/Drivers/DriversDetails?driverId=GPW8G&fileId=3531254795&osCode=W764&productCode=latitude-e7470-ultrabook&languageCode=du&categoryId=NI )

  everything seems to work as expected.

  Thank you for your comments

• Install Windows 7 on the new Latitude E7470

  Hi all

  I'm struggling with this one. I have a new Latitude E7470. I installed our internal image of Windows 7 (we use Acronis Snap Deploy) and it installed fine on the network, but the installed W7 does not recognize the USB hubs or ports (keyboard and mouse still work) and does not know the new Intel I219-LM or new 8260 Intel wifi NIC since there is no internal CD I have no way to get drivers into the system in order to start the comm! Our image works on most new Dell systems, but this E7470 is apparently too new. How can I do this thing even a USB or SD card? All I have to do is get a driver for the CARD, so I can take care of the rest.

  The other thing I've tried is to install W7 from scratch. I have a Dell install W7 SP1 64 bit on a brand USB drive. I can't install Windows 7 from this USB because it is not aware of the necessary drivers for the SSD m2. I'm assuming that even if I had W7 to install from this disc, I would always much luck with USB drivers or the card NETWORK on it...

  So, what should I do now? We're still a shop W7 so I need to find a new way to get W7 on this machine.

  The way I see it, I have two options. That I could take an old computer, load our image on it, drop installers for new NIC driver on it or teach them with pnp and create a new image from push to this laptop, install the new NETWORK adapter drivers and rebuild our image. Or I could build a whole new system off the dell OEM version supplied with the downgrade E7470 and W7. Yes, I did a backup of the system OE until I wiped it off.

  I was wondering if anyone has run across this before and he has ideas about how to do a system more about USB chipsets when there is apparently no way to load external files. Once I tell myself what I can do our new image so it will be towards the rear-chipset to the current, but it's getting the newer chipsets recognized that I'm having a problem with.

  Thanks in advance for any ideas!

  Well, I found this one. Not proceed with USB, but I managed to connect a SATA external cd-rom drive to a docking station that recognizes the computer! Then on another machine, I burned the installer of NETWORK card on a CD, and this one is back in business.

  I was surprised, he did not "legacy USB" mode in the BIOS as I have seen in other portable USB 3.

  If you have a docking station Latitude, maybe you'll be lucky enough to find an external SATA drive. Mine a number of Reference Dell 'K01B '. As far as I can tell it is out of production, but they can still be found on ebay and amazon. In any case, it worked for me. Good luck!

  Dell, consider adding a USB mode inherited to the BIOS on this system. Thank you!

• replacement of matrix of FHD TN on the W530 by FHD IPS?

  Hello!

  Is it possible to replace FHD TN matrix on a W530 (B156HTN01_1) with any good IPS matrix?

  I am really disappointed by the angles of vision and colors.

  I don't know any IPS screen that fits. B156HTN01 V1 is not the original screen (60% range). The original is B156HTN01 V4 - 90% range.

• Latitude e7470, BitLocker, Windows 7

  We just bought a new e7470 of Latitude. We installed Windows 7 Enterprise. TPM is enabled in the BIOS with the default settings. Windows 7 is installed instead of the UEFI Legacy mode. BIOS version is 1.9.4, the latest version. I noticed this is TPM 2.0 while our previous e7450s had TPM 1.2. I'm not entirely sure of the difference, but I guess that's enough so that it does not work.

  in any case, when I activate the TPM for the reader of the OS, I get this message:

  "The Trust Platform Module (TPM) on this computer does not work with the current BIOS. Contact the computer manufacturer for BIOS upgrade instructions'.

  I have the latest version of the BIOS. My only guess is that Windows 7 is not fully compatible with TPM 2.0? I installed a hotfix, but does appear to have installed a driver for the TPM secure. How can I fix?

  In case anyone wondered, I was able to get this to work. Apparently, the secure version of the TPM can be decommissioned in this laptop. I spent at 1.2 and BitLocker works very well. Here is the site of Dell KB:

  www.dell.com/.../ES

• Aspire E5 - 432 - updated TN HD stock FHD IPS display: which eDP cable?

  Hi all

  I want to spend the stock screen 14 '' TN HD 1366 x 768 for a FPS Full HD 1920 x 1080 screen on my Aspire E5-432. FullHD requires a video of Ted 2 lane cable, while HD requires only one cable of eDP 1 way.

  Issues related to the:

  1. Is the video cable to the E5-432-P99T stock an 1-way or 2-way eDP video cable, is it only or capable FHD HD?

  This guy http://thinkpadmint.blogspot.com/2014/03/replacing-display-on-t440s.html

  replace the screen whith a B140HAN01.1 and he used the same cable. If it helps, it's the cable he had.

  

• SSD 1 TB upgrade in Latitude E7470

  Stopped on this laptop choice list a M.2 SSD 512 MB as the best choice.  The tech specs list also 512GB like the max, but I wonder if it shows just what Dell offers.  There are now versions 1 to the market of the m2, it would be this work as an upgrade?

  Hello!

  I tried with a series of 540 Intel SSD 1024 GB SATA-600 m2. Works like a charm.

• New E7470 Latitude and 2.5-inch SSD

  Does anyone know if an SSD to 2.5 inches can be added to the new Latitude E7470 14 inch portable computers? I could do that on previous models (E7440). Looking at the owner's manual there seems to be enough space next to the battery, but there is no mention of a 2.5 slot.

  A Dell sales representative assured me that I could but could not provide me the reference of a shopping cart / cable to cela (and seems to be more inclined to sell me the phone to answer my question). Dell support won't talk to me unless I already have one.

  Reader m2 are nice but limited to 500 GB.

  I apologize for the misunderstanding.  Looking at the user manual I see no place for a disc more and have to say that you won't be able to use a 2.5 inch drive outside using an external enclosure.

  

• Looking to buy Chromebook 2 CB35 C3350 to the United Kingdom

  I am looking to buy the Chromebook 2 (2015), FHD IPS to the United Kingdom. The model number is CB35 C3350.

  I am struggling to find vendors online and otherwise.

  Where I would be able to buy one?

  Did you ever get an answer to your request?
  Looking to buy in EU soemwhere.

• HP pavilion 15 t-bc000 a game: Add m2

  Recently, I bought a laptop with the following configuration. I want to know if I can change my M.2 SSD 128 GB with a 950Pro of Samsung SSD 512 NVMe m2?
  Samsung 950pro has a matching M connection.
  
  HP Pavilion - 15 t-bc000 a game
  SSD 128 GB M2 + 1 TB HARD DRIVE
  Island-style backlit keyboard full size (Silver)
  Security software testing
  16GB 2133 - DDR4 SDRAM (2 x 8 GB)
  Intel® 802.11ac (2 x 2) Wi - Fi® and Bluetooth® 4.2 Combo
  15.6 "diagonal FHD IPS UWVA anti-glare-backlight WLED (1920 x 1080)
  Intel® Core™ i7-6700HQ GeForce® GTX 960 M 4 GB GDDR5
  No DVD or CD drive

  Hey Zarkhamin welcome to the community!

  The laptop supports SSDS m2 with the keys B and Mr. this article should help you with the different keys to m2.

  I think that this topic will be useful in your case.

  Captain_WD.

• Two fingers tap right-click (ALPS, Yoga 500) - here's how...

  Hello

  I just wanted to share and in which case I need information later it's nice to be able to find it on the internet if I forgot.

  I bought a Yoga 500 14 - IBD (born to Win10 - not upgraded) as is was on sale and I thought why not I need a second machine. It's actually a very nice machine and the Pentium seems much better in daily chores that I imagined (but her as Atom - like execution but in fact it's more like just below i3)

  However not everything is rosy red. Like the 900 and probably many other laptops of Lenovo, he got a very annoying problem. NO TAP TWO fingers FOR a RIGHT CLICK ! Argh! Beyond me a deemed manufacturer manage to get two bad finger tap!

  The Yoga of 500 I got is like the low end version of the 500 (although it got FHD IPS) and that's probably why they put in a touchpad ALPS while my 900 has got a Synaptics.

  I have not found any information about to enable two finger tap, right-click on ALPS touchpads on the internet so I messed up a little round in regedit (I'm confident enough so has not been worried, worst restore values) thought why not share.

  1. open regedit

  2 Goto - HKEY_CURRENT_USER\SOFTWARE\Apls\Apoint\Gesture

  3. change the value of 2TapShow to 1

  4. change the value 2TapSupport to 1

  5. modify 2TapSetting value set at 13 decimal hex d

  6. do the same for HKEY_LOCAL_MACHINE\SOFTWARE\Alps\Apoint\Gesture

  7 restart the machine

  Step 5 is optional. You are now in the control panel of the ALPS under multi finger set what you want two finger tap to do! Most likely, you want to have in the context menu, but there are also other options if you care right click.

  This information is for Windows 10 ALPS driver v8.201.1611.252 so things are not exactly the same on your laptop and of course the use of information is at your own risk. Messing around in regedit can make operating system unusable if you make a mistake!

  - ENJOY YOUR 'NEW' TOUCHPAD! --

  Also while adjusting your touchpad settings you can adjust the speed. Diffinately scroll speed to the maximum and sensitivity to the max as well. ALPS seems to jerk and get the fantom clicks if you're the type who just slightly touching the touchpad. Affecting sensicity max and the touchpad features very well no involuntary jerkyness and click.

  Sorry for a minor error!

  I was writing this in my OneNote and discovered an error.

  Point 5 is 2TapFunc NOT setting (!) However, this doesn't mean probably much - only that you should open the ALPS Control Panel to then hit the function instead of working just after regedit and restart both with the fingers together.

  Sorry for inconvinience but the forum does not allow me to edit a post efter sometime!

• Y50 replacing the screen

  I ordered a Y50 (what I'm using right now) a few weeks ago and I ordered a model with "FHD IPS display. I realized that my screen isn't IPS due to the bad angles of vision and bad color range. I was wondering if I can send it to Lenovo to get this corrected free of charge because I ordered it with IPS. Although I can stay with my TN, I somewhat feel blurred by all this and want to study a free correction that I deserve. Can someone answer this?

  Thanks in advance.

  Your saved order lists an IPS display? If If are back on the customer service and insist he is traded to pay for model? You have been sent a lower spec machine.

• Authentication and Password Manager

  I'm trying to see if there is a way to turn the password manager leave during installation of the authentication work.

  We are running Dell Data Protection Enterprise Edition and currently using the encryption part, but we are now beginning to deploy Latitude E7470 with a fingerprint Reader.  We want to allow users to use the Finger Print Reader to log on the system, but do not want to use it for all the different websites in that they connect.  Is there a way to disable or permanently disable password manager during the installation of the part of authentication?

  Hi Tim,.

  You can not disable the functionality of password currently switch installation Manager however the below registry additions will prevent the operating password manager.

  > [HKEY_LOCAL_MACHINE\SOFTWARE\DigitalPersona\Policies\CommonSettings]

  > [HKEY_LOCAL_MACHINE\SOFTWARE\DigitalPersona\Policies\CommonSettings\ {42F9948B-B690-4325-A073-63A8BF31FF32}] "DisableApps" = DWORD: 00000001

  >

  > [HKEY_Current_User\SOFTWARE\DigitalPersona\Policies\CommonSettings]

  > [HKEY_ Current_User \SOFTWARE\DigitalPersona\Policies\CommonSettings\{42F9948B-B690-4325-A073-63A8BF31FF32}] "DisableApps" = DWORD: 00000001