Module not found in the Simulator

Similar Questions

• EtherCAT: "found a module not supported on the slave device"?

  Hello

  I have a CompactRIO system that uses of slave hunts EtherCAT (cRIO-9081 + cRIO-9144) when I tried to deploy my settings, I got this message:

  Found a module not supported on the device slave address 0: 32445 slot

  What does that mean? (I have several slaves Garland, but of course, I don't have that many slot machines!) The chassis that has been reported with a red exclamation point contains these modules:

  • NI9201
  
  
  • NI9203
  
  
  • NI9265
  
  
  • NI9421
  
  
  • NI9481

  Is one of them unsupported on EtherCAT? If so, is there a list of modules taken into charge/no supported somewhere?

  Thank you!

  Hey there,

  I think you'd find this knowledge base, http://digital.ni.com/public.nsf/allkb/CA3A1D2166A4591386257514007A0F9C?OpenDocument , useful. It would be better to check what version of DAQmx you use and check the readme associated for compatibility or verify this DeveloperZone, http://www.ni.com/white-paper/10462/en. I hope this helps.

• How to solve error oracle.jbo.ConfigException: Houston-33001: Configuration file /sa/gov/rgr/model/module/common/bc4j.xcfg is not found in the classpath. ?

  Mr President.

  How to troubleshoot the following error message, I am a beginner so please help!

  oracle.jbo.ConfigException: Houston-33001: Configuration file /sa/gov/rgr/model/module/common/bc4j.xcfg is not found in the classpath.

  Concerning

  Cherish!

  My worm jdev is 12.1.3.0.0

  Was wrong my code in my servlet

  an incorrect code is

  String amDef = "sa.gov.rgr.model.module.AppModuleAM";
  String config = "AppModuleAMLocal";
  AppModuleImpl am = (AppModuleImpl ) Configuration.createRootApplicationModule(amDef, config);
  

  When I saw my bc4j.xcfg file then I change my code and I was able to run my report correctly.

  String amDef = "ash.model.SchoolAppModule";
  String config = "SchoolAppModuleLocal";
  SchoolAppModuleImpl am = (SchoolAppModuleImpl ) Configuration.createRootApplicationModule(amDef, config);
  

  Now my happiness

  See you soon

  Concerning

• JVM and Module not found error

  Hello.

  When I run my application, as soon as the Load Simulator shows JVM error 104 ClassCastException, and then tap home screen to eception exception Java.lang.ClassCastException.

  If I open my application I get JVM error 104 but saying RuntimeException, and if I keep a popup says error start MyApp: Module not found net_rim_ui_api.

  I even tried to launch a simple application of HelloWord and get the same errors. Reinstalled the Simulator, still nothing.

  Anyone have any ideas?

  Thanks in advance.

  If you are using the Eclipse plugin, and then you expand the node for the project in the Package Explorer, you should see a library item JRE System, the version of the JRE System why you compile. You can change the JRE version by right-clicking on the JRE System Library, then select "Properties".

  If you use BlackBerry JDE, use the editor that comes with the 4.6.1 distribution JDE.

• Project failed and the project of packaging is not loaded to the Simulator

  Hello

  Whenever I run the bb Simulator on my Eclipse, it always gives me "Packaging project failed" and my project sometimes appears in the downloads on the blackberry Simulator (even it is not in the package), but most of the time, it says "Module not found" or it is not loaded in the Simulator.

  What is the cause of this problem and how to fix it? Thank you.

  I use the Simulator to 9700 with OS 5.

  Hi all

  I just tried to restart my laptop and it works all of a sudden. I still don't know what the problem was, since there is no error before packing 'failed '. I hope that never, it will fail again.

  Thanks to all for the replies!

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/

• MODULE NOT FOUND ERROR MESSAGE

  TRY TO UNINSTALL NORTON SECURITY 2007-MAKE ERROR SPECIFIED BY MESSAGE MODULE NOT FOUND
  HOW CAN I GET RID OF NORTON SO I CAN INSTALL ANOTHER PROGRAM? GOD, VISTAS SUCKS

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download and run the above Norton removal tool.

  If you continue to have problems with it, contact Norton:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  See you soon. Mick Murphy - Microsoft partner

• Error: "FATAL: oracleasm Module not found" in Red Hat 6

  Hi all:

  ... OS: Red Hat 6.5 (64-bit)

  I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

  2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

  I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

  [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  My kernel is:

  2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

  My version of Red Hat is:

  [root@oraprd01 binarios] # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

  Why am I the above error while trying the oracleasm module init? WHat am I hurt?

  
  

  Thanks in advance.

  Problem solved.

  I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

• Latitude ON "Flash Module" module not found on initialize to top

  I recently reformattedand partitioned my hard drive in order to install Win7 64 bit (installed with Win7 32 bit).  After installing all the drivers, firmware updates successfully and the software, I am unable to access the Latitue feature on.  In addition, at boot or start the Setup application, I get a 'Flash Module not found' error.

  

  Looks like a ready Boost error.

  "first introduced with Windows Vista in 2006 and also included with Windows 7. It works by using flash memory, drive USB 2.0, SD card, CompactFlash or any kind of portable flash mass storage system as a drive for disk cache. »

  Otherwise, it must refer to the Adobe Flash software that would need to be reinstalled.

  Adobe Flash Platform * update Flash Player to support access Flash

  Note: For versions prior to version 10.1 Flash Player, use the support updating mechanism in previous versions of the player (manual download and install from www.adobe.com or ExpressInstall). In addition, the AIR installer manages the necessary updates for Flash Access and does not support the SystemUpdater API.

  
  

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Wacom Cintiq 13HD - "a supported Tablet not found on the system."

  You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?

  That's what I see in the system Pref Pane:

  

  Have you checked the forum Wacom for possible solutions?