launch of a new workflow customized to IOM 11 GR 2

Similar Questions

• How to close the instance of Firefox launched via file/new window without killing all instances of Firefox?

  Before the last update Firefox, running on Ubuntu if it makes a difference, I was able to select close on the file menu (and if memory is also by clicking the x on the last tab) to exit an instance of Firefox open via file new window.

  With the 9.x update this no longer seems to be possible. If I choose the file altogether starting an instance that was launched via the new window, all instances of Firefox away!

  It's embarrassing because I have to leave all the instances that have been launched.

  I tried closing last tab add on, and it allows me to close the last tab content but still leaves the instance running with a blank tab.

  Is there a setting somewhere that I missed to restore the operating mode to exit the additional instances of Firefox without killing all the previous configuration?

  Thank you
  Burt

  Each window must have its own close button (big X in the right corner.)
  But it depends on the 'Theme' that you use in Ubuntu. This large X chould be a round point when you hover over the color changes. It could be on the left instead of the right site.
  This screenshot shows the close the left side, but always an X button.

  CTRL + SHIFT + W closed the window Active.
  CTRL + W closes the current tab.

• New Workflows

  Hi, is there a resource to get new workflows across?  I'm short vCO 5.5 and the workflow I want is to list all active Snapshots in our environment.  I am not enough yet to create my own uncomfortable.

  Thank you very much

  Here you go:

  snapshots = new Array();
  var vms = VcPlugin.getAllVirtualMachines();
  for(i in vms){
      var vm = vms[i];
      if(vm.runtime.connectionState.value=="connected" && !vm.config.template){
          var vmLayout = vm.layoutEx;
          if(vmLayout!=null){
              var layoutFiles = vmLayout.file;
              var layoutSnapshots = vmLayout.snapshot;
              for(l in layoutSnapshots){
                  var layoutSnapshot = layoutSnapshots[l];
                  var dataKey = layoutSnapshot.dataKey;
                  for(m in layoutFiles){
                      if(layoutFiles[m].key==dataKey){
                              var snapshot = VcPlugin.convertToVimManagedObject(vm,layoutSnapshot.key);
                              snapshots.push(snapshot);
                      }
                  }
              }
          }
      }
  }
  System.log("Total number of Snapshots found: "+snapshots.length);
  

• VMO cannot create the new workflow

  Much like the other postings around the Internet, I am connected to th Orchestrator v4 client.  At lower left, that he says that I'm connected like me and Media Administrator).  I guess that means that I am part of the Administrators group that I created on install and VMO properly applied my credentials.

  The problem is that half of my options seem to be grayed out.  I can't create new workflows, I can even add a new category.

  Research on this problem, it seems that the same question is asked and then the solutions just kind of drift off, there was however a response indicating that my license could play a factor in the present.  It was my impression that Orchestrator came free with vSphere, but maybe not really.

  The systems I use it's on is currently licensed as vSphere 4 Essentials, this could be the problem.  I'm having a hard time finding the documents and information on Orchestrator so I was hoping someone here could answer this question.

  Thank you for your understanding.

  Yes, that's exactly the problem - the "essential" does allow you to run workflows that have already been created. To reproduce, create and edit workflows, you must have a 'Standard' or better license.

• Custom in IOM 11.1.1.5 plugin

  Hi all
  I am developing a custom plugin IOM, which will perform the generation of e-mail after "+" Create User + quote request.
  The version of the IOM is 11.1.1.5.
  
  I followed the official documentation [this link: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/plugins.htm#CHDFHIGE] and basically did the following steps:
  1 developed java custom code with JDeveloper
  2 build the source code
  3A said the custom in the plugin.xml file plugin
  4. at copied class plugin custom to the IOM server for example in $MIDDLEWARE_HOME/OIMPlugins/lib
  COMMENT: during this operation, I kept exactly the same custom java package directory structure.
  For example, class custom plugin is in the package java my.custom.plugin and I copied the java class custom in the folder $MIDDLEWARE_HOME/OIMPlugins/lib/my/custom/plugin
  5 has created a zip file containing the plugin class (always with its directory structure) and the plugin.xml file
  6 copy the zip file to $OIM_HOME/server/plugins
  7 edited ant.properties file (under $OIM_HOME/Server/plugin_utility) defining the variables wls.home and oim.home
  8 built the wlfullclient.jar (only the first time)
  9 registered the custom plugin
  10A created the custom DataSet plugin file
  11. any using the IOM database ' + weblogicImportMetadata + ' utility
  12. using cache purged "+ PurgeCache + ' utility
  
  NOTE: all steps above was performed using the network user running the process of IOM
  
  Then I create a user using the '+' Create User + model of the application, this custom plugin needs to be raised and is expected to generate the e-mail address for the user in the application.
  This does not, happen that the plugin does not work; in fact, I don't see or any log message custom plugin that I wrote in my code or the user e-mail correctly filled.
  
  I tried exactly the same procedure on another version of IOM (11.1.1.3) as well as custom plugin works.
  
  So, what are the missing steps for IOM 11.1.1.5? I can't find all the differences by comparing the related document of IOM 11.1.1.5 with IOM 11.1.13 a.
  
  Thank you
  Daniele

  Event Manager, try the following:

  and the plugin xml in the form:

  -Marie

  Published by: Bikash Bagaria on December 21, 2011 14:44

• Guide / blog example configures / has for a new workflow

  I played some time with powercenter to create new workflows. Now, I want to run them in the CAD. But I can not find a guide or a blog (with examples) wich steps to follow to set up the car for a new workflow.
  
  More information about this just a...
  
  TNX in advance...
  
  just found this blog but is way ' at the global level, written t
  
  Published by: user565199 on February 23, 2010 02:26

  If I'm not mistaken, there are information in the user guide DAC with the details step by step on the registration of new workflows in DAC. Check only once.

• Field of custom Validation IOM 11 GR 2 PS2

  Hello

  I need post if the document exists in the data basis of oim, if the case exists, an error message can be indicated.

  I do a validation custom for the field in the form to create a user. I created a custom code and I have deployed the oracle.iam.ui.custom - dev-starter - pack.war with custom libraries. I changed the configuration of sandbox to use the field of custom validation.

  private static final String DOCUMENT_ATTRIBUTE = "DOCUMENTO__c";

  document of UIComponent private;

  ...

  Gets and sets

  ...

  {} public validator Sub (facesContext, UIComponent uiComponent, FacesContext, object)

  {if (uiComponent.Equals (document))}

  Valid DocumentValidator = new DocumentValidator();

  Connection String = new String();

  String documentToValid = new String();

  documentToValid = FacesUtils.getAttributeBindingValue (DOCUMENT_ATTRIBUTE, String.class);

  Login = valid.docValidate (documentToValid);

  {if(!login.) IsEmpty())}

  facesContext.addMessage (uiComponent.getClientId (facesContext),

  new FacesMessage (FacesMessage.SEVERITY_ERROR, EXIST_DOC + "-" + login + "document:" + documentToValid, null));

  }

  else {}

  FacesUtils.partialRender (text);

  }

  }

  }

  Configuration of sandbox:

  Component data - catalogue / imput value with text field label

  < mds:insert parent = position "_xg_pfl5" = "last" >

  " < = xmlns:af af:inputText ' http://xmlns.Oracle.com/ADF/faces/rich "" "

  value = "#{bindings." DOCUMENTO__c.inputValue}.

  label = "#{bindings." DOCUMENTO__c.hints.label}.

  required = "true".

  columns = "#{bindings." DOCUMENTO__c.hints.DisplayWidth}.

  maximumLength = "#{bindings." DOCUMENTO__c.hints.precision}.

  shortDesc = "#{bindings." DOCUMENTO__c.hints.ToolTip}.

  ID = "dtrt_dc_8912853077".

  autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.cartDetailStateBean.attributeValueChangedListener} '"

  helpTopicId = 'document '.

  Validator = "#{backingBeanScope.userformbean.Validator} '"

  Binding = "#{backingBeanScope.userformbean.document}" >

  " < f: validator = xmlns:f ' http://Java.Sun.com/JSF/core "binding =" #{bindings. DOCUMENTO__c.validator}"/ >

  < / af:inputText >

  < / mds:insert >

  ...

  Thus, this metod getAttributeBindingValue returns null. I don't know if a bad configuration.

  Can it help me?

  Hello

  Have you seen/follow-up following doc ID?

  A Validation that is customized to the user create and modify operations in R2 IOM (Doc ID 1955302.1)

  ~ J

• How to use the hierarchy of position for approval workflow custom?

  Dear all,
  
  I created a custom workflow that is triggered whenever develops a new provider site.
  Now, I want to add the trust hierarchy in this stream. To do this, I want to use the hierarchy of the Position.
  
  I didn't find useful resources to do so. Can you help me please?
  
  Kind regards
  Natasha

  Salvation;

  Please check:
  Adding a custom Workflow process [ID 374930.1]

  Respect of
  HELIOS

• Adds new Anyconnect customer

  Hi guys

  I have an existing installation of VPN anyconnect for some users. Now we have another customer who needs VPN access in the network.

  How I would go to this topic on the plan of separation from the existing VPN. This customer will have a different address pool. Would this invole configuration of group policy and the different connection profile?

  IM new to VPN can then ask a question bbasic.

  Thank you

  Hi Mokhalil82,

  Yes, you are right.  You can only assign an IP pool by /connection group policy profile.  So, if this users must connect to another group. You must create a different group policy for this user and maybe apply a group URL or a group alias to the difference of this new link to the existing one.

  It may be useful

  -Randy-

• How can I create a new patch custom in PDF format

  I can't find out how to create a new custom patch.  When I try I get a page asking me where and what file I want to open but I do not have any file.  I'm totally confused I'm just going around in circles.  I tried to find info on the web, but it's just as bad.  Can someone help me please.  I want to create a stamp "PAID (with date)."   Don't know why Adobe don't have it on their list as I seem to be the most important of them.

  Thank you

  Roparman

  Hi roparman,

  Please check the details here: https://acrobatusers.com/tutorials/custom_dynamic_stamp

  Thank you

  Abhishek

• How can I get the feature 'Launch' catalog portal on the customer portal?

  Hi all

  I hope it's an easy question for someone more technical than me...

  We use v9.1.4 catalog portal and as the link to 'Launch' on the VM details screen, which allows the user to launch a virtual machine directly in the console.

  What we do not like, is that we cannot mark the portal catalog...

  We love the features of the customer portal and its "brandability", but we do not like that you can't launch a virtual machine shape...

  How can I copy the CatP to "Launch" feature to the CustP?

  I had a quick glance in the html code, but I couldn't see anything obvious - I'm not a very technical person! When I looked in the screen Designer, I can see the "Launch" button and the link on the Config Item details for the virtual machine screen, but its not editable. I do not see in it at all in the active Portal Catalog screen...

  Would be a good wanting someone to point me in the right direction?

  Thank you very much

  H

  It seems that you need to replace LiteAssetReview_VM.js

  function ShowHideConsoleButton()
  {
   if ((!jQuery.browser.msie && !jQuery.browser.mozilla) || jQuery("#CATALOG_PORTAL").val() != "True")
   {
   jQuery("#LaunchContainer").hide();
   }
  }
  

  Create a Custom_LiteAssetReview.js and add this in

  function ShowHideConsoleButton()
  {
   if ((!jQuery.browser.msie && !jQuery.browser.mozilla))
   {
   jQuery("#LaunchContainer").hide();
   }
  }
  

  I have not tested this, but I guess that if you uncheck the box for catalogue it will appear on the customer portal.

• Custom in IOM 11.1.1.5 SOA approval stream

  I am a new bie to IOM and need to acquire a multi SOA approval flow level in IOM 11.1.1.5.
  
  Please give me some url or doc where I can get the detailed procedure.

  Detailed instructions are given in the below obe.

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/OIM/oim_11g/Custom_Approval_Process_for_Resource_Request/custom_approval_process_for_resource_provision.htm

• Prevent sending e-mail when the new user of the IOM is created

  Hello
  
  I installed OIM11.1.1.5.2. Whenever a new user is created using the delegated Administration console an email with the following content is sent to the corresponding user:
  
  "Congratulations!" Your account has been created successfully! Your user name is < USER NAME >"
  
  How can I stop this email sent?
  
  Thanks in advance.

  Naviagte to IOM--> Advanced webconle--> export file Deployment Manager--> select model Notification & search click-->, select the model and click Export... it will be saved as an XML.

  Since it's OOTb, u also get any otheer environment later

  Regards
  user12841694

• How to launch a paying for a customer site

  Hello

  I have an Adobe Muse over site that is hosted on Business Catalyst as a temporary site.  I would like to direct to my client with its domain name and has charged for monthly fees.  I can't understand how to do this.  Directions tutorial I want to all lead to error pages http://helpx.adobe.com/en/muse/tutorials/upgrading-launching-your-muse-site.html#id_32925 and the videos all seem to be on a temporary site is published. When I go to the admin of my temporary site page the only workflow seems to be to publish as one of my 5 free sites.  Is there a set of routes somewhere that will tell me how to publish this site for my client?  Thank you.

  Barbara

  One option would be to use your creative cloud free site slot to take the site live. Follow this guide to upgrade your site to the desired plan that would free up to the top of the slot used and triggers a billing cycle separated for the plan, billed at the standard rate, depending on the frequency of billing - http://forums.adobe.com/docs/DOC-3161.

  Or you can publish the project on a trial Business Catalyst site, and then connect to your http://www.businesscatalyst.com/Admin/Index.aspx?to=PartnerPortalpartner portal > and follow the upgrade of the site of the process as stated here - http://helpx.adobe.com/business-catalyst/partner-portal/upgrading-your-trial-site.html.

  Thank you

  Vinayak

• Error: 382, error: 354, 362, 383 when saving a workflow custom in the database

  Hi all
  
  I created a custom Workflow.I created for the following activities.
  
  * notifications 2: *.
  
  -1:Approvar
  
  ---------------------2:FYI
  
  * 2 activities: *.
  
  -1:PL / SQL procedure to find the applicant approvar
  
  -2:Function custom table update
  
  Beginning and end of activity.
  
  Now after checking this workflow it gives me following errors:
  
  382: 1 WARNING (s) generated by a Validation of the design. You can save the invalid definitions, but they should not be used in the running process.
  
  354: failed to validate 'SAVE' for the activity "XXFSLAPP/PO_APPR_MAIN".
  
  362: validation failure of the activity of the child ' XXFSLAPP/PO_APPR_NTF '.
  
  383: activity of notification must be assigned to an interpreter when it is used in a process.
  
  
  Help, please
  
  Kind regards
  SHD

  Hello

  When you include a notification in a process, you must say what role it is sent to.

  Open the notification by double-clicking it in your process diagram. Open the 'node' tab provide the information contained in the article - what role model he's going? This can be hardcoded (constant type) or an attribute of the element.

  Then save the change.

  HTH,

  Matt