Layer in Photoshop to change value only

Similar Questions

• Change my plan of Adobe Creative Cloud to Photoshop, Illustrator and InDesign only

  Hello

  I am currently on creatively Cloud subscription (one year) complete but want to "downgrade" the plan I use not anywhere near any of the application in the plan.  What I'm after is a plan that would include Photoshop, Illustrator and Indesign only, the rest I need, and why pay a lot for the apps that I will never use isn't something I want to do.

  If someone could give me an idea where I might find a plan like this, or contact information for Adobe Creative Cloud, I would be very grateful.

  Kind regards

  Anina

  Hi Anina.Hoventer,

  I see that you have a subscription active creative under the enamel even cloud as with forums.

  We have a plan of photography which includes Photoshop and lightroom available for $9.99 / month.

  In the design and Illustrator are available for $19.99 / month each.

  You can refer please: pricing and membership creative cloud plans | Adobe Creative Cloud

  For more information contact Adobe support:Contact customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Control vs control tree string: "changed value" calendar race?

  I develop a configuration dialog box that uses a tree control and a tabbed pane and I have problems with the timing of the event. The tree control presents the structure of the connected equipment and the tabs pane shows the configuration for the selected node. The tree control is used as a tabbed pane may not have additional tabs created during execution, and the connected equipment vary from installation to installation. Rather than write a pane tabs hardcoded for each deployment, I use a flexible class structure that allows an "m x n' configuration - m zones with n channels per area, but n varies by area. By selecting a node in the tree fills the tab corresponding to the values of the node. The number of zones is limited the number of configured system views (discrete monitors) and the total number of channels is limited to the number of installed channels A/D. To capture the configuration data, each control in the tabs pane is a 'value changing' event, which sets the value of the element in the class.

  Now that you know what it is supposed to do, here's the problem: it only works if you do not click on the tree after a value is changed. For example if you enter in a new 'ladder' and then click elsewhere on the tabbed pane, the value is correctly associated with the node. If you click another node in the tree before leaving the field, the value is assigned to the node clicked instead. I looked at the timestamps for events and field "changed value" fires first, so the value of the tree should still be the original node. On the contrary, the tree seems to update before the event to "change the value" of the field is managed, even if the event of the field were pulled everything first. I read the value of the tree inside the event handler for the field, but there is no way to get the 'previous' value is the field control in the tabs pane.

  So where should I go from here? Is this a legitimate race condition, or am I just not processing events properly? I prefer not to post the code because it is pretty heavy with all its dependencies, but I can try to do a simple example.

  

  Cranky wrote:

  It seems that it is not an event filter for the change of the tree: value.

  This kind of surprises me.  But I couldn't find either.

  My other thought (like Altenbach) would store in a shift of the currently selected item register.  Since the change in value of the tree that happens after change in the value of the parameter, you read the registry value of offset for the change of setting and then update the registry to offset with the change in value of tree.  Do not forget to connect the values directly but for any event except the change in value of tree.

• A weird exception in 12 c (ORA-01461: can bind to a LONG value only for insert into a LONG column)

  I have a Windows application that accesses a database of 12 c Oracle via ODBC (driver version is 12.01.00.01).

  I have a table with a column of key named REGION_ID (NVARCHAR2 (9)) and a dozen other columns, of which three are named region1 and region.2 elle3, all of type NVARCHAR2 (40).

  When I try to insert a string in the scope of the region1 is longer than 9 characters (length of REGION_ID), I get an error ORA-01461 (' can bind to a LONG value only for insert into a LONG column). If I set the length of REGION_ID be NVARCHAR2 (15), so I can add channels to the region1 in length up to 15 field until I get ORA-01461 exception again. Curiously, if I change the name of column region1 to REGIONONE, I don't get any errors, and everything works fine. It's almost as if the column name region1 is being confused with REGION_ID backstage.

  Any ideas? I am using SQLBindParameter to bind the columns, and all calls are successful. I get the exception when I run the insert statement. This same code worked for previous versions of Oracle (9i, 10g and 11g). And if I use a driver of client 11g against the 12 c server, I do not receive the exception.

  Thank you!

  It is a component of ODBC driver bug in 12 c and it is fixed. You can download and install the fix for bug 18232462 or the last window for 12 c patch cumulative/bundle.

  Thank you

  Spengler

• How can I disable one of my accounts of Photoshop, I changed my OS and didn't, that I need to turn it off.

  How can I disable one of my accounts of Photoshop, I changed my OS and didn't, that I need to turn it off.

  I was running 10 Windows on my Acer laptop, and now I'm back in Windows 7.

  I didn't know that I need to disable all products...

  Thank you pattie, today I spoke with a support guy who was able to help me.

  Aparently my internet provider has been in some conflicts with adobe and this screen shows up as it should.

  Then, he was told to use 3g on my mobile to provide conection to my computer and connect to adobe and run a program.

  I did as he told me and then, then only the screen with the message with the option to turn off appears.

  and after a long week, I could finally use my LR with no problems.

  Thank you for trying to help me and all my thanks and good whises Luis Neves support that has helped me.

• ORA-01461: can bind to a LONG value only for insert into a LONG column

  Hello
  
  Oracle XE on RHE dedicated server
  

  create table cvDetails(
  cd_id number(14) primary key,
  cv_id number(14) constraint education_fk references CvProperties(cv_id),
  nationality varchar2(230),
  objectives varchar2(3900),
  name varchar2(230),
  fatherName varchar2(230),
  motherName varchar2(230),
  dob varchar2(230),
  gender varchar2(230),
  mStatus varchar2(230),
  passportNo varchar2(110),
  email varchar2(230),
  phone varchar2(45),
  mobile varchar2(25),
  address varchar2(2500),
  state varchar2(230),
  zipCode varchar2(230),
  city varchar2(230),
  education clob,
  experience clob,
  skills clob,
  languages varchar2(1400),
  hobbies varchar2(3200),
  achievements varchar2(3900),
  references varchar2(3900)
  );
  
  create sequence cvDetails_seq
  start with 1 increment by 1;
  
  create or replace trigger cvDetails_trig
  before insert on cvDetails
  referencing new as new
  for each row
  begin 
  select cvDetails_seq.nextval into :new.cd_id from dual;
  end;
  /

  Why do I get the error of subject?
  
  Thank you in anticipation

  >
  in any case, I checked manually according to your instructions and found that this objective column is of character input more than specified.
  >
  Glad you found the problem, but I hope that you learned a lesson that is time consuming.

  It must be remembered that we have no access to your environment. If we do not know which servers, clients, tables and users that you use.
  It may seem simple to you but doesn't realize that you provide us with two slightly different versions of the cvDetails table.

  The original post had this
  >
  objectives varchar2 (3900).
  >
  But when you have provided your 'cvDetails desc' journal text has
  >
  OBJECTIVES VARCHAR2 (3950)
  >
  It is the same table that you started with how the column suddenly grow 50 bytes?
  This means that you did from different parts of the present in the two schemas or on two servers or you change the table between the two.

  You can't address properly when you do this. By chance it is the column that you said is now the problem.
  In SQL, the maximum length of a VARCHAR2 is 4000 bytes; no characters but bytes. Nothing more than 4000 bytes would probably be a LONG in the generic sense.

  If your error
  >
  Re: ORA-01461: can bind to a LONG value only for insert into a LONG column
  >
  means that you try to 'bind a LONG value' to a column VARCHAR2 and you can't you can 'bind a LONG value only for insert in a LONG column.

  In the proper context, the error makes sense.

  You probably have a problem with

   ps.setString(2,  objectives);
  

  because the 'objectives' has a length of more than 4000 bytes.

  Remember this answer from you?
  >
  I have read and found that there may be a problem with the driver JDBC or Characterset. Am I wrong?
  >
  The 'Hello' ASCII string is five characters and five bytes because the ASCII code is a set of characters in a single byte. The same string internally in Java is five characters but ten bytes because Java uses UTF16.

  So, if the character set of the data itself is double-byte character set then anything more than 2000 characters (4000 bytes) is a "LONG". And if your column is defined as VARCHAR2 (3950), which means bytes a doublel-byte character set which are characters of 1975.

  Then you said in a response later
  >
  I checked by the SNA Server and oracle that are both of the same but new thing I found is that oracle does not allow more than one clob column in a table. Is this true?
  >
  Somehow a hypothesis has crept it that the problem was not a driver JDBC or Charaterset, but because you can not have more than one clob column in a table.

  You could have easily tested for yourself by doing what P. Forstmann - tried to create a table and see.

  Then you completely ignored my advice
  >
  I suggest to you isolate the columns actually causing the problem.
  Change your code to insert only a few columns. When it works, add more than a few columns.
  This will then tell you which column or the columns are at the origin of the problem.
  Display the results once you determine a column that causes the error.
  >
  When you have finally made the simplest things, you have found what was causing the problem almost immediately.

  Many times you don't need 'experts' - you must use a rigorous, methodical, process step by step.

  ALWAYS, ALWAYS, ALWAYS reduce the simplest possible code example that illustrates the problem.
  If you had followed this a rule would have probably found you the problem and makes you look like the 'expert '.

  There are no shortcuts.

• Locked layer in Photoshop CS4

  Hello

  I have a layer in photoshop which refuses to unlock. No matter how many times I click on the lock, it just continues to tell me it can not change the layer because it is locked.

  The file is in RGB, and I just don't understand. So frustrating = []

  Very well! I thought about it. Our lead designer has been out of the Office until a moment ago.

• LabVIEW digital control does not raise an event changed value when the button entry is hit

  I used to be able to type a value in a numeric control of LabVIEW, then press 'Enter' to trigger an event "changed value".  Then at some point, this no longer works.  I have to click elsewhere to trigger the event of value has changed.  The up and down arrow keys work always, but just typing a number then press enter does not work.  Is this a configuration settings got accidentally changed?  Help, please!

  
  

• Picture of the events of clusters - change value and the mouse down

  Hello everyone

  I am facing a problem of triggering events using two arrays of clusters.

  I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

  Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

  Any suggestions?

  The real VI is a little different from what I described, but the problem is exactly the same.

  Thank you

  Dan07

  Like this:

  

• Paste values only Excel

  Hello

  I'm trying to paste some values from an excellent worksheet to another. I have no problem to paste the cells in the State, the problem is, the cells that I copy contain formulas in them to calcute some information for me. I would like to paste values only. In excel you would do this by copy--> paste special--> values. I made a macro and tried to fallow it Word by Word. I got stuck when the paste special options surfaced. I have attached the image I hope it helps. If it is simply ask a VI and I will gladly make a sample vi.

  In fact, you can just right-click on the element of 'Paste' and select Create-> constant. This should create a constant enum where you can select the appropriate value.

• Why my event structure reacts to an event of "change value"?

  Hello

  I created a VI with 2 while loops and structure 1 integrated event. The first while loop creates a square wave and the value of the pass signal periodically - this event is registered by a property node and also shown on an indicator. I've linked the second event called "Mode-number: changed value" so that the signal and tried in various ways to "activate" the structure of the event (I tried to use event dynamic registration, property nodes, event tool etc.

  Attached to this message is a png of the VI file.

  No idea what could be the problem?

  Thanks much :-)

  Bruno

  You must use "user events. You should also look at some of the examples/tutorials on how to use them, see here: http://zone.ni.com/reference/en-XX/help/371361K-01/lvhowto/creating_user_events/

  What you have done is to try to enter a value in both structures change event - this is not actually generate a value change event. Value change events are generated when you (as a user) change a value of a control on the front panel.

  Alternatively, you can use the 'Value (signalling)' property that will allow you to update the value of an indicator and also generate the event changes its value. I think in your case if you are better to use user events.

• Slider with integer values only?

  I want to create the slider which accepts integer values only.

  For example: 1.0 to 5.0, step: 1.0

  How to do this?

  In a Word, DIY there is no entire cursor in Cascades.

  Wrap the cursor (ongoing) standard floating point in your own class.
  Listen to the signal valueChanged (float) and immediateValueChanged (float).
  Make your own signals when the cursor moves to one discrete value to another.
  Fix the position of the cursor continues to nearest discrete value in the signal valueChanged (float) handler.

  For each continuous cursor position you will need to find the nearest discrete value.

• How can I get 3D rendering of Photoshop CS6 predefined values?

  On the next Web page, parentheses, (3D rendering and saving in Photoshop ) refer to the render presets, which, according to him, can be chosen by the lower part of the 3D > scene Panel. The article seems to include Photoshop CS6 and not only Photoshop CC. Yet, I do not see these presets, and, if they are not pre-installed in my version of Photoshop Extended, I would like to download. Will someone please tell me how to locate these presets, or how I can download them, if they do not already exist in my Photoshop?

  With our thanks,

  FTT

  You must click on the tab 'scene' in the 3D Panel.

  Who will activate the pre-defined menu at the top of the image as an attachment. Open the menu and you can make a selection based on its name, but there are no illustrations on the photo to see.

  Best regards, Terry

  

• Layer, reorder, reverse doesn't work only with TIFF files

  Impossible to get this process works as Adobe says in PS CC on my Windows7 PC.  Found that when I select all the actions layers do not work. If I do not select the upper and lower layers, but select everything between these two, action works.   Adobe is working on a fix or I missed something?

  Thank you!

  If the bottom layer is a background layer try converting it to a normal layer.  Background layer Photoshop is always the lower layer that no layer cannot be under the bottom layer. Photoshop is not a file editor that it should not matter if the file being opened is a PSD, PSB or Tiff file in layers.

• ORA - 01461:can bind a LONG value only for insert in a LONG column. After upgrade to 11g

  After update, oracle 11g, we get the system error when you try to insert the text string in the NCLOB type column.

  ORA - 01461:can bind a LONG value only for insert in a LONG column.

  This has not happened on an earlier version of Oracle.

  I did some testing and found that, if a string more then 2000 we get this error.

  How to solve this problem?

  Thank you

  I found a solution. I had to update ODP.NET to 2.112.1.0 version.