Layout of different text in firefox and chrome?
Hello
I just finished my site and I can't seem to correct the empty layout on my text (example: biography section) between Safari and Firefox and chrome that appears as I Muse soft.
PS: sometimes background image shows too much, I don't know why :-/
Thank you very much
David
I checked out the site with several browsers, but wasn't able to find any difference of layout problem, can you please post some screenshots and add some details like how page content is not rendered correctly on what browser?
Thank you
Sanjit
Tags: Adobe Muse
Similar Questions
-
Open the URL or file not working in Firefox and Chrome (_blank)
In Captivate 8, I created an advanced where action if the student clicks on an exit button, we present a web page pop - up in a new tab with an investigation into the matter to our company Web site and also to leave the window that was running the online course. The problem is that it seems only to create this pop-up window when the student uses MS Internet Explorer.
We ensured that pop-up blockers are disabled when we tested Firefox and Chrome, but it does not solve the problem. The PC used to test this did Flash Player loaded on them for Firefox and Chrome.
I initially had my command output on the same page of action after a number of breaks, so I tried to move later on a different page and added more than action breaks, in which case it was a timing problem.
Someone there to meet other this problem where to open a URL or a file doesn't seem to work Firefox and Chrome even when no pop up blockers were?
I want to Captivate 9, but I can't use this version because they have made some internal changes and now my Javascript does not work properly. Therefore, I must stay with Captivate 8 until they fix their code base.
Thank you
Randy
These breaks don't do anything. They break just the timeline.
Your JavaScript does nothing no more. You try to set a Captivate variable called 'cmi.exit' that does not exist. You must use:
SCORM2004_CallSetValue ("cmi.exit", "suspend");
You must also set the request of nav:
SCORM2004_CallSetValue ("adl.nav_request", "suspend");
If there is a problem with a popup being opened in Flash, I would put everything inside an external function. You can put it in the standard.js
function myExit()
{
SCORM2004_CallSetValue ("cmi.exit", "suspend");
SCORM2004_CallSetValue ("adl.nav_request", "suspend");
Window.Open ("url to your survey")
}
-
Does not work in firefox and Chrome
Hello
It's works fine under IE but does not work in firefox and Chrome browsers
What's not in this code?
var pageURL:String = ExternalInterface.call("window.location.href.toString"); if(pageURL == null) { pageMsg2.text = "Seems like javascript is disabled"; } else { pageMsg2.text = "Enabled"; }
calling
window.location.href.toString
directly from js (i.e. no flash) in the work of chrome or firefox?have you tried to create a wrapper function for
window.location.href.toString
?for example in js
Function myFunction()
{
Return window.location.href.toString;
}
Flash
var pageURL:String = ExternalInterface.call("myFunction");
if(pageURL == null)
{
pageMsg2.text = "Seems like javascript is disabled";
}
else
{
pageMsg2.text = "Enabled";
} -
Difference between Firefox and chrome NPAPI
Hello
I write a few plug-ins; I myself Gesko SDK from the mozilla site; After build it correctly loaded and works on Firefox;
I tried to load and run with chrome; I found that chrome can not load the plugin; After debugging, I found that plroblem based on the structures of table - size of the structures is not the same in firefox and chrome.
Supplementary search lead me to a difference - it's in alignment; Firefox and Gesko using 32-bit alignment/packing and packaging/chrome use 8 bit alignment;
So, my questions are:
-What is a bug in chrome or firefox?
-When it be fixed?
-I did not work with chrome previously; Since when is - this make a difference?This forum is oriented to support end-user for Firefox, not to the developers, so you can't get an answer from someone who knows exactly what you're talking about. For not to sound rude, but if your plugin works in Firefox, but not in Chrome wouldn t it wise to ask a support forum for Google on your Firefox plugin does not work in Chrome?
With respect to 8-bit vs operating systems 32-bit, AFAIK 8 bits and programs date back like 20 years, so I doubt if Google uses 8-bit in its ' plugins. But that would be better in someone familiar with plugins and development of Chrome.
-
Can I run Firefox and Chrome separately on the same computer
I'm currently under Firefox and Internet Explore on my computer, can I change Explorer for Google Chrome and that run with Firefox?
Some articles suggest that they block each otherYes, you can run Firefox and Chrome. However, we have to be the default browser. For example, Windows will need to know which browser to use when opening links in programs. Some programs can be coded to use only Internet Explorer, so it is a good idea to leave it installed.
- Firefox: Tools-> Options-> Advanced Panel (general tab)-> (Select Select) always check to see if Firefox is the default browser on startup-> check now
- Chrome: Key tool-> Options-> basics (tab)-> make Google Chrome my default browser
-
Netflix Silverlight crashes in Firefox and Chrome but works ok in Media Center.
I have a Windows 7 computer, I intended to use for Netflix movies specifically so I can get the subtitles. Netflix is running in Media center, but does not seem to support subtitles. Silverlight crashes after 20 or 30 minutes in Firefox and Chrome. I think it hangs is IE also, but I rarely use it because it is difficult to get through all the options of the offer. I did uninstall it and reinstall stuff without success.
I'd like an answer.
Hi wehrmacher,
See if these items are of no help:
http://forums.Silverlight.NET/t/130129.aspx/1
http://support.Mozilla.org/en-us/questions/751159Netflix:
support.Netflix.com/ -
Firefox and Chrome problems with computer Samsung Windows 8
I got a new laptop from Samsung series 3 a few days ago. I installed Firefox and it periodically only half loads certain web pages such as Yahoo and Facebook, out of all the photos and the tabs. This does not, unless I completely uninstall Firefox with all my information and reinstall it, and then it gives me a few hours and I have to repeat the process. So, since I hate IE 9 and 10, more even than their predecessors, I installed Google Chrome and have exactly the same thing happen. I read in the forums of Firefox and Chrome, it seems to be a problem with the Samsung computers, but none of the fixes there helped me. All I have this problem and it fixed or have a solution?
Hello
the problem is Samsung built the program support center. This is a specific problem of Samsung. To fix just remove Samsung support center program by using Add/Remove Programs, and then the cache of Firefox clear and all would work fine.
-
video doesn't work does not directly in Firefox and Chrome
Use the HTML5 video widget and got my mp4 movie to appear and work fine in Safari, but under Firefox and Chrome, it shows a film about the birds diving into the ocean fishing fish, which I suppose is a movie from Adobe. Is it because I do not understand a webm version? The link of webm isn't hot, so I can't use it. Can you just put in the format of a film? WEBM is the preferred format?
Since I posted, I unchecked "file external webm" and was able to add a local file of the web. Then transferred again and everything works fine now. So it seems that I must download time an MP4 Player and a web file.
I have the latest Firefox and Chrome browsers.
-
I created a pdf with swf file embedded. Set it to AutoPlay.
Play well in IE9.
In Firefox and Chrome video appears (first photo) with a 'play' button.
Not to play, not automatic nor when I click on the play button.
Firefox and Chrome, I just downloaded, so the newer versions.
Windows 7 Professional.
Found the solution for Firefox.
In firefox, goto tools/options.
Looking for Portable Document Format (PDF).
Select it and in the menu select use Adobe Acrobat (in Firefox) rather than using Firefox (default)
Thanks but no thanks, the Acrobat team.
-
Site cannot be read with IE, works with Firefox and Chrome
I have a family site that works very well with Firefox and Chrome, but with when we created a new page and transferred, could not be with IE.
http://www.thetravelintexans.com/States.htm has been modified to add the latest picture of the last row, it has been downloaded and works fine.
If you click on the last photo Andrew at Disney, need you for this page http://www.thetravelintexans.com/AndrewsDisney.htm . This page acts as it does in Internet Explorer, but said quickly at the bottom of the screen, but it is empty. The source code is visible, but no details of the page at all. Again, this works very well with Firefox and Chrome.
I use Dreamweaver CS4.
Thanks for the tips.
Fred Blair
IE gets a little anxious when there is no DOCTYPE to work. He tends to fall back into a quirks mode and behave irrationally. Makes me think of me when I don't have any goals.
Solution, simply give your pages a DOCTYPE valid and all is well. For more information, see here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.thetravelintexans.com%2FAndre wDisney.htm
GRAMPS.
-
Firefox and chrome show a third of the screen
When I open a firefox window, only the third Center of the screen shows something. When I zoomed in, he acts as the third Center is the only usable part and the text becomes larger, flexible to keep in this third Center bur.
I loaded chrome to see if it would be different. no joy.
I found a few sites that use the entire screen
http://en.Wikipedia.org/wiki/Firefox
but it seems that all firefox/mozilla screens are limited to the third centre as is yahoo
eBay is the Center, amazon is a bit wider, but not yet on the edges.14.04 LTS
You must use the zoom full page (i.e. to remove the tick: view > Zoom > [X] Zoom text only) to make Firefox the page zoom and not the text.
Otherwise, the text is zoomed and other elements remain the same. -
Error in FireFox and Chrome when evoking the PHP contact form
I get the following error during the presentation on the contact page of my site in Firefox. Chrome does not display an error, but does not work. IE works fine and sends the e-mail.
Error #2044: Unmanaged by securityError:. Text = Error #2048: security sandbox violation: http://www.greenclouddesign.com/index.swf cannot load data from http://staging.greenclouddesign.com/php/flashcontact.php.
at::contact_51/sendData() [index_fla.contact_51::frame1:22] index_flaMy AC3 code
enter_btn.addEventListener (MouseEvent.CLICK, sendData);function sendData(evtObj:MouseEvent):void
{
const SCRIPT_URL:String = "http://www.greenclouddesign.com/php/flashcontact.php";
var request: URLRequest = new URLRequest (SCRIPT_URL);
var variables: URLVariables = new URLVariables();
These depend on what calls the script expects to this
variables.frmemail = email_txt.text;
variables.frmname = name_txt.text;
variables.frmcomment = comment_txt.text;Request.Data = variables;
depends on if the script uses POST or GET
Request.Method = URLRequestMethod.POST;var urlLoader:URLLoader = new URLLoader();
urlLoader.load (request);
root.gotoAndPlay ("home");
}Any help is appreciated
update your flash player IE and it will probably fail too.
you have an error in security sandbox because those who resemble different areas to Flash. a solution would be to use a cross-domain permissions file. another would be to use a local php (to your swf) file to send and load data cross-domain and then sent to your swf file.
-
Cannot open Firefox and Chrome
I had installed the Savevid video plugin in Google Chrome... after which, chrome has not opened at all...! Then, I uninstalled chrome and tried to reinstall, it process "Chrome.exe" (setup) would just appear and disappear in the Manager of tasks... "." In addition, then I installed Firefox, and tried to open it, but the same way, "firefox.exe" appears and disappears from the Task Manager (in the process tab)... Please help me... I am not able to access these browsers at all!
Hi Pullak_Barik,
I see this is your first question, welcome to the community.
What I would recommend is to restore your system to before that the problem occurred by returning to right until you have installed the plugin SaveVid. Windows converts this easy and safe. Here's how:
- Press + R to display the race.
- Type RSTRUI and then press OK.
- Choose the date and time you want to restore (it will also tell you the names of all the programs that have been installed at this time).
- Click next to restore your system at that time here.
The best part about this, is that it is completely safe. If you don't like the food, you can cancel it. Or you can try again with a different date. It will not affect one of your personal files/images, it restores only the system return settings to their operational status. If that's really the way the faster, safer and easier to get "back in the market".
Let me know how it goes.
-
Different display in Firefox and Internet explore
Hello
I could ask a very basic question, but I tried to look for a solution. Now, coming to the problem, I did a simple tabular report that queries a table and displayed. I have no problem to generate the report, and the values are displayed correctly in Firefox, while the display is different in Internet Explorer.
Example of
In Firefox (Version 3.0.5)
SNO DocumentNo
___ __________
1 X-08954466
2 X-02929298
In IE (Version 6)
SNO DocumentNo
___ __________
1 X 08
954466
2 X-029
29298
My version of the database: Oracle XE 10 g, edition apex - 3.1.2
It would be great if you can provide guidance to solve this problem.
Thank you
Eric
Published by: carolemialhe on January 30, 2009 01:31Hi Eric,.
Unfortunately, IE and FireFox (and most of the other browsers as well) have different default attributes for the HTML tags. It is likely that you see this for you tags TD that contain data.
The first thing to try would be to force nowrap on TD. In the area of the region of your report header, add in something like:
<style type="text/css"> .t18data {white-space: nowrap} </style>
(replace the number of theme you are using 18)
If this does not work, there are other things, we can try.
Andy
-
Some Web sites lock up Firefox and Chrome, but not in Explorer
When I search Google News "Edward Snowden", some clicking on some sites Web crashes Firefox, requiring a re-initialization (Windows 7). Here is a site that caused a complete blocking:
http://www.Google.com/URL?SA=t & rct = j & q = esrc s = & source = newssearch & cd = 1 & cad = AJLN & ved = 0CC8QqQIoADAA & url = http %3% 2F % www.dnaindia.com%2Fworld%2F1869429%2Freport-edward-snowden-misses-girlfriend-amidst-outpouring-of-love-from-russian-girls 2F & ei = ann - UaPkBsSptAa_oYHoDQ & usg = AFQjCNHRRYLmGDtn9ZrMt1-CtaHie4oxBw & sig2 = Phhb2QB3vkwm0Yt22Ouw1w & bvm = bv.50165853, d.Yms
This site has also locked up Google Chrome, but surprisingly it it does not lock to the top of the Windows Explorer!
You will appreciate your help.
Bernd R.Hello
Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.
You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
- In the Firefox options window, click the Advanced tab, and then select 'General '.
- You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
- Now restart Firefox and see if the problems persist.
In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:
This solve your problems? Please report to us!
Thank you.
Maybe you are looking for
-
2013 F2 does not open some old version screws
I tried to open some old programs of LabVIEW with 2013 f2 and it remained just in an idle loop until I killed the program. That is what it is? Never mind. I restarted my computer and everything worked OK.
-
Obsolete Windows Genuine Advantage on the MS Site
When trying to update Windows Media Player 11 on the MS site, I wonder to validate my version of Windows XP using the Windows Genuine Advantage that comes back and tells me that the tool itself is outdated. I then go hunt down the latest version of
-
Problem with the size of the text I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen. Evil in my sight. Inhabitant of the desert
-
original title: why the time & date that sits on the computer change every time I have Vista premium edition reboot.using Larson
-
Resolution of the screen.
I have windows Vista and I want to than the screen resolution of 1024 x 768, but when I start my computer the morning he's coming back SE to 800 x 600 again. How can I keep the resolution to 1024 x 768