Layout of incompatible web after using a model

Similar Questions

• How can I change the layout of my web application after paging

  I wish that all pages except the home page to have a different layout when displaying web apps.

  Is this possible?

  Hello

  Can you post the URL of your site? This might be feasible, one of the simplest implementations would be something like this: wrap the webapp listing in an element and use the page number in the class, something like:

  webapp list here

  This would make the div class change with each page, page 1 (or if no page is set) he will come to the top of current page or current page1 and then became current page2 and so on.

  The trick would be to attribute some CSS rules only to the current page and current page1 classes that appear differently. After the site visitor goes to the second page or any other page that these does not apply and full registration will be a different set of CSS applied.

  Note that you need to have BC. Then activated - Introduction to the liquid for globals to work.

  Hope this helps,

  Mihai

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• Make a new website using a model pre-made?

  Hello. I'm a long-standing InDesign and Photoshop user who is new to Dreamweaver and site construction in general. I'm on a Mac and use Dreamweaver CS6. I have run into a problem too confusing for me to solve alone. I have a Web site template pre-made beautiful models in time I want to customize. Models are the .dwt format and work well in Dreamweaver. The thing is that I don't know where to start. There are a lot of files in the download of models in time:

  

  I opened the file called homepage.dwt and found it very simple to edit (by edit, I mean just change the headers and insertion of text and photos, etc.). Then I wanted to go to the contacts page and change it. On the homepage, there are menus, drop-down and control-click on 'Contact us' mode Live view brings up a display of the contact page, but it doesn't seem to be the real contact page. I can't change the header of "Your company name" on behalf of my company, and the text in code view don't coincide with the page. Obviously, I'm doing something wrong. Any advice? Perhaps someone could me step by step in the creation of a new Web site by using a template pre-made walk?

  If you haven't already done so, define a local site folder in DW.  Go to Site > new Site.  Say DW where you want to keep the files of the site on your local hard drive.

  C:\YourSiteName

  This is essential for DW to manage assets and connect the paths for you.

  Please read the entire chapter in aid of the F1 'way of the models Dreamweaver."

  Also read the documentation templateinstructions.html

  In a Word, templates (.dwt files) are an exclusive feature of DW to manage your web site.  MODELS are not web pages in itself.  They are used to generate web pages.  Each model contains Editable Regions for unique content that will change page.  Everything outside the Editable Regions applies globally to all pages of the site has led to this model.  A menu header, brand/logo, footer, navigation and side bar are examples of elements at the level of the site.  These items are not directly editable from pages of the site.  Only, they can be changed in the main Template.dwt file.

  To work with files Template.dwt,

  1. Go to file > new > Site templates.
  2. Choose a site in the #2 Panel.
  3. Select a Template.dwt file in the #3 panel.
  4. Press the button create.

  He is a child page given birth from a template.  Save as new_filename.html.  Repeat for additional site pages.

  Judging by the screenshot, it looks like the authors model gave birth to several children pages based on templates for you to work with.

  layout - 1column.html

  layout - 2column.html

  simple2column.html

  Product.html

  Product2.html

  and so on...

  Nancy O.

• How to unlock a site Web to use a plug-in when activating the plugin defined as 'Ask to activate?

  Hi all

  In the desperate not to use Flash more attempts, I put the activation setting to 'ask to activate '. Then I went on a website (which uses the Flash) and Firefox prompted me if yes or not I allow this Web site says to use the Flash. I didn't allow this site to use at the time so I first clicked on the cross to close the issue. But she appeared again and I then said 'Keep blocking' (or whatever it may be in English).

  However, I now want to use Flash on this website while keeping the 'Ask to activate"setting. But the guest does not show even after restarting Firefox. So the question is how can we get back it? How to enable a Web site use a plugin after the user said no?

  Thanks in advance.

  Roadkiller

  When you click on "Keep blocking" Firefox adds an entry to the basis of site permissions (permissions.sqlite) to you don't bother with the information bar more. The notification icon to always appear in the address bar.

  You can also view the permissions of the Page Info dialog Panel. You can call it using one of these:

  • Right click and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  There should be a section from the permissions list of plugin on the site where you can find 'Adobe Flash' and if it is set to block, change it back to "Use default".

  If that's not restore the bar information, and you can't live without it, there are three ways less than ideal to clear this permission setting:

  (1) use the feature "Forget this Site" to erase all data for the site: site permissions, bookmarks, cookies, history, everything. If you right click on any entry in the history of the site, "Forget this Site" is on the shortcut menu.

  (2) completely remove database permissions from site (but this removes things like blocks of cookie, permissions popup, etc. for all sites). I do not recommend this.

  (3) use an extension that allows you to edit the permissions from site database (a little involved, see: https://support.mozilla.org/questions/1011980#answer-606947).

• (not a problem) Web pages using your name in advertising!

  I recently fell for a whrn ad in a Web page, I know it was my fault, but the Web page uses a layout and images of your Firefox so that I learned it was you. Of course you had nothing to do with this but it has happened when I enterd a completely undepended site.
  I wanted to especially know you that i nothing else going on, I'd printscreen it he Swedish since im here hope I could just to warn you, but you have not seme to have this possibility.
  The url is below, don't know if it'll popup outside Sweden tho.

  Good luck TobbeB

  http://web.prize3.com/readys/Browser%20survey/%28tablet%29/v3/translated/index-se-se.html?voluumdata=vid..00000001-b4e6-425f-8000-000000000000__vpid..c140c000-0138-11e4-8fdc-d0e3ff0d1a41__caid..b8eeffed-7787-4cbd-9b35-df607542079a__lid..f0579a69-2306-4ddf-a0d4-918d59f86942__oid1..52ce9630-4e90-46ef-81bc-fb0174d35160__oid2..1779bb3d-2355-49ea-ad6e-29767ef11d2a__oid3..04316a64-8474-4610-a434-406b8839f551__var1..romeo-bay-EfhMNDYW__var2..torrentz__var4..2049

  The main place to really point out any use abusive what whatsoever associated with including Firefox Mozilla is to http://www.mozilla.org/legal/fraud-report/ that I doubt that the FBI cares about this.

  The link is http://web.prize3.com/readys/Browser%20survey/%28tablet%29/v3/translated/index-se-se.html

• HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

  have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

  try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

  45fmj

  Hello

  Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

  Kind regards.

• The phrase after "Set Station models overall" step could not be evaluated.

  When you run a TestStand sequence, I get the following error message:

  The phrase after "Set Station models overall" step could not be evaluated.

  Types of variable or a property do not match or are not compatible.

  Error code:-17321; Types of variable or a property do not match or are not compatible.

  Although I do not understand the above said, the root cause of fixing is a little something else.

  I'll explain the scenario.  The code is developed in TS4.1.0, although this should be irrelevant.

  I inherited a project of TestStand that call LabVIEW modules.  The original sequence works very well on the test pc (which is installed remotely).  Local and remote computer share the same StationGlobals.ini.

  This is why it is strange...  If I use the old or the new code, I get the error message on the local PC.  I was assuming that by using the same StationGlobals.ini would have fixed that, but it didn't.

  When I run the old code on the remote PC, I do not get this message, but I understand with the new code.  I don't remember changing the code that hit the StationGlobals.  My aim is to fix on both machines (at least one remote).

  It is the expression he doesn't like:

  StationGlobals.Models = Locals.Models,

  However, this same expression is in the original code.  The only thing that has changed is the addition of a new model number in the Locals.Models.newNumber.  I suspect that this contributes to the error.  But why it give me an error when I run the local original sequence?  Maybe I should try running it again...

  In both cases, suggestions to overcome the error?

  Thank you.

  RayR

  Please ignore the post.

  I found the problem...  There was a disconnect with the number of models.  Easy fix.  It's all good.

  For anyone else that might fall on this thread for the same reason, here is an explanation.

  I added a new model with its variants to the Locals.Models list.  In total, he had 16 additions to the list.

  I also added to the StationGlobals.  Which means that my StationGlobals is no longer equal that on the remote PC.

  Where the error came, is there a model missing in the StationGlobals, so the size (number of models) does not match that of the local population.

  Surveillance at sea listed models a slight (I won't even count them).  Now fixed.

  ... and embarrassed...

  

  I can thus give me an "acceptable Solution".

• Impossible to print a Web page using photosmart premium c309a using Internet Explorer 9.

  I just installed Internet Explorer 9. Now, I can't print a Web page using my network photosmart premium c309a. I also have a Photosmart c6250 networked and I peut print for her. What gives? Am I missing something? I know that this is a known problem by searching the problem and Windows solution does not help.  I have no problem with the c309a print when I go to the internet, it's just a problem of Web page with IE9.  All/any help would be appreciated.

  HP helped me by making me install a different driver. Download and install the printer driver 6980. After installation, go to the printer properties and add a new Standard TCP/IP port and use IP address for the c309a.  I don't think I'm missing something, but I received the information from their chat support.  Then, when you want to print from IE9, choose the 6980 printer (which is actually the c309a printer).  This HP support doesn't help.  You must talk to a living person who knows something about printers.

  I hope this helps.  In fact, I switched to Mozilla Firefox as my default long ago, and it works very well with the c309a printer.  I only got this solution because I could be chatting with them on another printer and I mentioned that I could not print from IE9.

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• Rename the Service profile after creating through model

  Hello

  first... I found a discussion earlier, but from 2010, so he's changed a lot. At that time, it was scheduled for a future implementation

  Creating profiles of server through service templatesalways adds a number (based on how to generate profiles).

  But I don't need this number. We have a nameconvention for servers on ends with a zero (such as abcd9000).

  So, how can I use the models without numbers (leaving blank does not work) .or how can I change the name of the new profile service?

  We run on the 1.4(3q) Version.

  Concerning

  Silvio

  Currently, it is not possible to rename the objects. What you can do here, use the creation of a Clone function that is available when you click on a Service profile existing (SP). This gives you the opportunity to choose a new name altogether and the location of the SP.a cloned. It is very useful if you use address pools in the SP master because the cloned SP automatically borrows a same pool addresses. If you're bored after clicking on create a Clone of 30 times, it's something that you can easily automate with the power of the UCS Toolkit (unit Powershell cmdlets 1300 +).

• Significant decline in performance on the GRE tunnel after using cryptographic protection

  Hi all

  I have two G1 RSR (1811 and 1812) who have a GRE tunnel between them.

  Without any encryption protection I received about 3.6 MB/s in regular transfers of Windows SMB. After using cryptographic protection of the tunnel I'm now only 2.7 MB/s transfers of same.

  No idea as to why this is?

  My conclusions:
  According to this http://www.cisco.com/web/partners/downloads/765/tools/quickreference/vpn... the AES crypto fixed return of the 1800s is 40 MB/s.
  The increase in overhead of cryptographic protection shouldn't be the problem I tried to test the transfers on the tunnel without protection and 'ip tcp adjust-mss 800' of the tunnel. There was only a small performance drop here, not as much as with the crypto.
  I tried several sets of cryptographic transformation, they all give the same performance as long as they are made in the material.
  ISAKMP is always done in the software? I can't get it to show its is done at the hardware level, regardless of isakmp policy.

  IP MTU on both interfaces of tunnel are 1434 with cryptographic protection.

  My config:

  crypto ISAKMP policy 10
  BA aes 256
  sha512 hash
  preshared authentication
  Group 20
  isakmp encryption key * address *.
  !
  Crypto ipsec transform-set ESP-AES256-SHA esp - aes 256 esp-sha-hmac
  transport mode
  !
  Profile of crypto ipsec VPN
  game of transformation-ESP-AES256-SHA
  !
  Tunnel10
  IP 10.251.251.1 255.255.255.0
  no ip redirection
  no ip proxy-arp
  load-interval 30
  source of tunnel FastEthernet0
  tunnel destination *.
  tunnel path-mtu-discovery
  Tunnel VPN ipsec protection profile
  !

  Output:

  ISR1811 #sh crypto ipsec his
  Interface: Tunnel10
  Tag crypto map: addr Tunnel10-head-0, local *.

  protégé of the vrf: (none)
  ident (addr, mask, prot, port) local: (* / 255.255.255.255/47/0)
  Remote ident (addr, mask, prot, port): (* / 255.255.255.255/47/0)
  current_peer * port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 683060, #pkts encrypt: 683060, #pkts digest: 683060
  #pkts decaps: 1227247, #pkts decrypt: 1227247, #pkts check: 1227247
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  endpt local crypto. : *, remote Start crypto. : ***
  Path mtu 1500, mtu 1500 ip, ip mtu IDB FastEthernet0
  current outbound SPI: 0x8D9A911E (2375717150)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0xD6F42959 (3606325593)
  transform: aes-256-esp esp-sha-hmac.
  running parameters = {Transport}
  Conn ID: 45, flow_id: VPN on board: 45, sibling_flags 80000006, crypto card: head-Tunnel10-0
  calendar of his: service life remaining (k/s) key: (4563208/1061)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:
  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x8D9A911E (2375717150)
  transform: aes-256-esp esp-sha-hmac.
  running parameters = {Transport}
  Conn ID: 46, flow_id: VPN on board: 46, sibling_flags 80000006, crypto card: head-Tunnel10-0
  calendar of his: service life remaining (k/s) key: (4563239/1061)
  Size IV: 16 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:
  outgoing CFP sas:

  ISR1811 #show in detail his crypto isakmp
  Code: C - IKE configuration mode, D - Dead Peer Detection
  NAT-traversal - KeepAlive, N - K
  T - cTCP encapsulation, X - IKE Extended Authentication
  PSK - GIPR pre-shared key - RSA signature
  renc - RSA encryption
  IPv4 Crypto ISAKMP Security Association

  C - id Local Remote I have VRF status BA hash Auth DH lifetime limit.
  2015 * * ACTIVE aes sha5 psk 20 12:42:50
  Engine-id: Conn-id = SW: 15
  2016 * * ACTIVE aes sha5 psk 20 12:42:58
  Engine-id: Conn-id = SW: 16
  IPv6 Crypto ISAKMP Security Association

  Use of CPU for the transfer with crypto:

  ISR1811 #sh proc cpu its

  ISR1811 09:19:54 Tuesday Sep 2 2014 THIS

  544444555555555544444444445555544444555556666644444555555555
  355555000001111133333888884444444444333333333377777666662222
  100
  90
  80
  70
  60                                          *****     *****
  50 ****************     **********     ************************
  40 ************************************************************
  30 ************************************************************
  20 ************************************************************
  10 ************************************************************
  0... 5... 1... 1... 2... 2... 3... 3... 4... 4... 5... 5... 6
  0 5 0 5 0 5 0 5 0 5 0
  Processor: % per second (last 60 seconds)

  ISR1812 #sh proc cpu history

  ISR1812, Tuesday 09:19:24 Sep 2 2014 THIS

  666666666666666666666666666666666666666666655555444445555544
  777888883333344444555555555566666777770000055555777776666666
  100
  90
  80
  70 ********          ********************
  60 ************************************************     *****
  50 ************************************************************
  40 ************************************************************
  30 ************************************************************
  20 ************************************************************
  10 ************************************************************
  0... 5... 1... 1... 2... 2... 3... 3... 4... 4... 5... 5... 6
  0 5 0 5 0 5 0 5 0 5 0
  Processor: % per second (last 60 seconds)

  I think that this performance is what you should get with the legacy 18xx SRI G1. But the performance degradation is perhaps really a little too high.

  For ISAKMP, there is no problem with that. The amount of protected data is too small to have one any influence.

  As a first test, I would remove the GRE encapsulation by setting "mode ipsec ipv4 tunnel" on the tunnel interface and compare if the results improve.

• Help, please! Cannot access the web after connected to the VPN

  Hello

  I'm a newbie on Cisco products.  I configured a Cisco ASA 5505 with VPN firewall.  However, I can't access the web after I connected to the remote IPSec VPN.  I also cannot connect to the bands using the intellectual property.  But I can connect to the internal servers in the office with no problems.

  Here is my setup, can someone help please?  Thank you very much

  ASA Version 8.2 (5)

  !

  host name asa

  xxxxxxxxx.com domain name

  enable the encrypted password xxxxxxxxxxx

  xxxxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  area of zone clock - 8 schedule

  clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00

  DNS lookup field inside

  DNS server-group DefaultDNS

  Server name 107.204.233.222

  name-server 192.168.1.3

  xxxxxxxxx.com domain name

  inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal strategy group xxxxxxxx-sc

  attributes of xxxxxxxx-sc group policy

  value of 107.204.233.222 DNS server 192.168.1.3

  Protocol-tunnel-VPN IPSec

  XXXXXXXXXX.com value by default-field

  xxxxx xxxxxxxxxxx encrypted password username

  Strategy Group-VPN-xxxxxxxx-sc

  remote access to tunnel-group xxxxxxxx-sc type

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  Group Policy - by default-xxxxxxxx-sc

  tunnel-group xxxxxxxx-sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  call-home service

  anonymous reporting remote call

  call-home

  contact-email-addr [email protected] / * /

  Profile of CiscoTAC-1

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02

  : end

  Hello

  Try adding the following commands

  permit same-security-traffic intra-interface

  NAT (outside) 1 192.168.1.96 255.255.255.240

  Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.

  In this case, these configurations should do the trick

  In order from top to bottom, they would do the following things

  • First remove the pool VPN and VPN configurations
  • Then remove the VPN pool
  • Remake of the VPN Pool with different network
  • Reattach the VPN pool for VPN configurations
  • Configure NAT0 to the new cluster of VPN
  • Remove the old line of the ACL of the configuration of NAT0

  attributes global-tunnel-group xxxxxxxx-sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0

  attributes global-tunnel-group xxxxxxxx-sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0

  no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240

  Of course you also have the NAT configuration for VPN pools new Internet traffic

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Please rate if the information has been useful if this resolved the issue as mark responded.

  -Jouni

• Try to reinstall Adobe CS6 on my computer after using the creative cloud

  I'm trying to reinstall my Adobe CS6 Design and Web Premium (specifically Photoshop and Illustrator) on my computer (Mac) after using CC for free by the school. I just got the "Subscription expired" notice from the creative clouds, so I tried to put my disk to download what I had previously used, but I still get the membership expired notice when I try to launch the program despite going through all the steps and correctly put it back on my computer.  I'm not trying to continue using CC, only CS6.  Any help would be greatly appreciated!

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

  -includes information on how to stop the Update Manager or the clouds to run at startup

  -above is for Windows, but can help with ideas for Mac

  In the vacuum after you have uninstalled and before reinstalling assistance is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html