Make a new website using a model pre-made?

Similar Questions

• Make a new file using the "Save as".

  Bit of feedback to the staff HERE...

  We use LabVIEW 8.6. and, at least in this implementation, trying to make a new VI using the command save as product a menu of choices, including none make sense to me. Sorry, but I can't say which of them will produce only makes a new file with a changed name to be refined. Trial and error product folders, but not files, replaces the original file (why would I do that, I chose save as no record) and about each result other than what I was trying to accomplish.

  May you fix this in a future release, but for 8.6, I feel that I must take a class just to save the new file.

  you're not alone...

  Have you tried "open extra copy?  This is probably what you want.  It will not copy the original and will keep the open source.

• T-Shirt Designing (1): how to make wider white box (using the model of t-shirt)?

  CS6 using

  T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?

  Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.

  It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).

  Question, am I suppose to create the right design in the large rectangle?

  2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.

  What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.

  How to make the small rectangle in the large t-shirt too?

  Hello

  The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.

  (1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.

  

  (2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.

  

  (3) select the small rectangle, and delete.

  

  (4) use the Rectangle tool to draw a new in size.

  

  5) option click on the new rectangle to open a launcher. Select make Guides.

  

  You now have a guide again, larger rectangle! Let me know if you have any other questions.

  

• model background image disappears when I make a new page of the model

  I have a background image in my container in my model.  When I make a new file based on this model, the background image disappears.  No idea why?

  Open your child page in code view.

  Correct the path to your background image manually as described in my previous post.  Record.  Preview in the browser.

  This aid?

  Nancy O.

• How to make the new display using Javascript

  Based on a given condition, I want to change what nodes are visible in a given view and then save it as a new view.

  var viewIndex = 0;

  pageIndex var = 0;

  A3D var = this.getAnnots3D (pageIndex) [0];

  var aRuntime is a3d. context3D.Runtime;

  Duquette var = a3d.context3D.scene;

  var aView is aRuntime.getView (viewIndex);.

  var i = 0;

  for (i = 0; i < aScene.nodes.count; i ++) {}

  var aNode = aScene.nodes.getByIndex (i);

  If (... check...) {

  aNode.visible = false;

  }

  }

  ... How to save this change to the visible nodes to a new view? ...

  Interactively, I can go to view > > manage views... > > new view > > Ok

  I can't find anything in the documentation or search the Internet on how to do it programmatically.

  The short answer is you can't.

  However, you pouvez add a list field or down the page or create a menu in the 3D runtime which will display a list of named views as "views" you "Save" through your code. If I did that, I would use a hidden field containing a JSON string that stores the original name of the view and the changes that your code performs. Then when one of these "views" is selected, obtained in the initial display and then review the terms that you have captured in your if statement.

  These, of course, would not appear in the model tree, but would be visible in your list box.

  J-

• How to make a 'new tab' use my home page?

  I tried everything I could think of, but a 'new tab' will not open my home page. I tried the 7% C and she deleted my entry on my home page. I took me a long time to find the 'options' on the 'New tab' page, they belong to the regular options not on a separate page. Is there a way I can load my own homepage and only my own homepage when I start, load n another of my own home page when I select 'New tab' as it was in older browsers?

  If you want the same page to your home page and the new tab page, this extension is the easiest way to do this:

  https://addons.Mozilla.org/firefox/addon/new-tab-homepage/

  I don't know what you mean by that:

  I tried the 7% C and she deleted my entry on my home page.

• How to make a new display using Javascript

  Based on a given condition, I want to change what nodes are visible in a given view and then save it as a new view.

  var viewIndex = 0;

  pageIndex var = 0;

  A3D var = this.getAnnots3D (pageIndex) [0];

  var aRuntime is a3d. context3D.Runtime;

  Duquette var = a3d.context3D.scene;

  var aView is aRuntime.getView (viewIndex);.

  var i = 0;

  for (i = 0; i < aScene.nodes.count; i ++) {}

  var aNode = aScene.nodes.getByIndex (i);

  If (... check...) {

  aNode.visible = false;

  }

  }

  ... How to save this change to the visible nodes to a new view? ...

  Interactively, I can go to view > > manage views... > > new view > > Ok

  I can't find anything in the documentation or search the Internet on how to do it programmatically.

  Posted on Rich Media & 3D. The answer was that you can not.

• How can I make the editable CSS in a model created using a DW layout page?

  Hello

  I made a page of model using the model of a centered, fixed column, header, and footer.  I then

  Do the header and the content areas of the editable regions.  I left the footer as a locked region.  Now

  whenever I do a page based on this template, I can't change the CSS for all the

  regions - not even the unlocked regions.  How to make CSS an editable area so that I can change

  backgrounds, fonts, etc. of the header and the contents of the regions without changing them using the

  page template?

  The CSS is embedded in the head of the template page?  It is in an editable region he called "head"?

  If the answer to the first question is NO, then you should already be able to change any than CSS.  I'm guessing that the answer is YES.

  If the answer to the first question is YES, and the answer to the second question is NO, then you must export it to an external file using the ability to export to Dreamweaver CSS rules.  Then when you save the page template, this new CSS file link will be spread to all the child pages.  You should now be able to freely edit a CSS contained in this file.  Alternatively, you can MOVE the CSS into the editable region in the template page's head.  Since it is now in an editable area, the only change that will propagate the child pages is that the CSS has been removed, you will need to paste this block of CSS in this editable region on each child page existing.  New child pages will already have that CSS it when they are created.

• When I start a new search of yahoo tab comes and I don't want that. How to make a different website to open?

  When I start a new search of yahoo tab comes when I start a new search yahoo tab comes and I don't want that. How to make a different website to open?

  You need to understand what you installed that changed this action to Yahoo on a blank tab, which is the default action in Firefox; and then get rid of this add-on. Then you can install an add-on that allows you to select what you want in the new tab.

  https://addons.Mozilla.org/en-us/Firefox/addon/NewTabURL/

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• I want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting?

  you want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting? @@

  Hi love,

  You can publish your Business Catalyst, simply open your file of muse and select files-> publish.

  Please refer to this tutorial:- publish your site with Adobe Web Hosting | Learn the Muse | Adobe TV

  In addition, once your site is published, you can add your domain to your site hosted on BusinessCatalyst.

  Please refer to this tutorial to add your domain name:- http://helpx.adobe.com/business-catalyst/using/change-site-domain.html

  Hope this helps

  Kind regards

  Rohit Nair

• Make a new instance of a symbol existing (video clip or graphic) using AS3

  I want to make a new instance of an existing design (video clip or graphic) when an object hits the side of the stage. I have the code to see if he hit the side of the stage, I just need to know how to make a new instance and bring up where the head-butted. I also want to be able to have several of these instances on the screen. Thank you in advance, I'm sure it's a fundamental thing, I'm just really new to Flash, then Yes.

  First create the symbol as a movieclip.  Then right click on the object in the library and select the link option.  In the Panel that opens select the export for actionscript option and then assign a class name for the symbol... say you name ImageMC (caps are usually used to begin class names).  Flash will provide an indication that he cannot find a class and it will create a when you compile.

  To add a new instance of the symbol to the stage you use...

  var imgMC:ImageMC = new ImageMC();

  imgMC.x =? ;

  imgMC.y =? ;

  addChild (imgMC);

  where x and y values (?) will be established based on all the information available to you about where the ball was when he hit the wall.

• How can I go into a used computer and change the username to the mine and to make a new password or delete the old user of my computer completely? (preferably get rid of the former user)?

  I need to know how to solve this problem in detail please

  I bought a computer with windows xp service pack 3 and when I start it the old user keeps popping up asking for a password. I want to know how to enter and change the username to the mine and to make a new password or delete the old user of my computer completely (preferably get rid of the former user)?

  See the following link to delete the account: http://support.microsoft.com/kb/279783

• ? on the use of models and the addition of the text please

  Hi all

  Thanks for looking... I don't know if anyone can answer that. I'm trying to learn flash here and I've seen some tutorials and managed to create an and add text, that animate the text as a hyperlink.

  My question is about those pre-made model Animations. As snow for example. When I opened my (new folder) select (models/snow). My time line has the entire model sitting on an image. While the animation of parts model when previewing, properly and for a full minute.

  Here's the rub '

  If I want to add text and use (presets of movement), a box pop up tells me it must be interpolated and I hit OK and text blocks (so that the layer) spring to 80 executives and (snow scripted model) remains in the image #1. I hit an excerpt and my text is what I want, but the snow scripted model which is only #1 remains in place and there is no background or model goes hand in hand with my text which has been tense for 80 frames.

  I can't find the answer to what I think should be a simple drag / (snow model) on the 80 frames to match the blocks of text, so everything is copasetic and alto. However, it is not as easy as hanging out video on a timeline.

  Anyone?

  Miserably stuck,

  Netcommercial

  Scripts defined on all frames where an object exists will continue as long as this object persists. for example, make a button on frame 1, extend to 5000 frame button. Just put a script on frame 1 that the button control. The button works for 5000 frames of the script on frame 1. However if you ever remove the button (for example to add a keyframe on the layer of button) and add new, the script will not work because it is a "new instance" and you will need to be run again the button works.

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.