LC r710

Similar Questions

• (Redirected) Connect a R710 PE to a NetApp FAS2040

  No one knows what cables and other connections to use for linking a PowerEdge R710 SAN NetApp FAS2040 storage?

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• Sostituzione batteria R710 RAID controller

  Buongiorno.

  Sono a take UN preventivo relative alla batteria da auswechseln al PowerEdge R710 quanto sul display compare the written relative alla batteria del controller download.

  The batteria che ho trovato nel sito:

  

  e compatibile?

  Speaking saluti

  By how far the batteria del RAID controller, part da acquistare e questa. Accessories.euro.Dell.com/.../ProductDetail.aspx

  Saluti

  Marco

• Rescue R710 & RAID controller

  Hi all

  I have an old R710 server and I need to do an upgrade of the RAID controller

  your suggestion for the best price/performance raid controller, please, I have a 4 TB drive

  Better compliance

  GVO

  PERC H700.

• Internal hard drive inside Dell PowerEdge R710

  Well then clarify first of all. This server is NOT used in a business environment. Its literally being used as a home media server (Yes, exaggerated way I know but I got for free so who is complaining).

  IM currently using a PowerEdge 2950 as my media server, I just took his upgrade, a R710 Gen 2 and I would like to use all 6 bays at the front for hard drives that I can put the plates on instead of 1 for the operating system and then everything else for the media.

  How I would go about installing an internal hard drive, preferably a SSD, inside the R710. I know it has a free SATA port but I can't seem to see the spare power cables or cables molex as there is in the Gen 3 2950 I.

  If it is not possible, it's quite good, but I would like to have installed an internal hard drive.

  I know there is a USB port, but I use Windows Server R2 2012 (probably soon to be Server 2016) but I'm not sure if Windows Server can be installed on the internal USB port.

  If you need to record, or on the label of service I can give you this information.

  Any help would be appreciated.

  Thank you

  Arron

  Thanks for the clarification. It's something that you can try, but it is not supported and there is no guarantee that the SSD will be detected and it works perfectly. Try this P/N GP700 cable

  

• Help - power up to Raid question R710 - the following VDs are missing 01

  IM needs assistance regarding what to do next. I have a R710 turned off and installed a new ram. Restarted and the ram is very well detected. However, I have the screen shows VD01

  The following VDs lack 01.

  Im not sure what my next step would be, and my concern is that if I go into the configuration I will wipe disks

  Any help would be really appreciated

  Brendan

  

  You can press 'F' to import and continue or start the configuration utility and import the foreign configuration.

• PowerEdge R710 lcd blue flashing

  I have 2 of these R710 rack mounted servers. We have a constant blue lcd the other flashes blue. I can't find where it is defined.

  All solutions are welcome.

  Press the cursive 'i' button next to the LCD.  It's the "identify" button... allows you to identify one system among others / scores you need to work on.

• Edge of power R710 with MBE2147RC SAS 6 GB/s 146 GB, 15K RPM in a RAID5 configuration replace it with another disc?

  Hello!!

  We have here R710 breaks with the SAS 5 hard drive MBE2147RC model in a RAID5 configuration and we need to buy spare parts, but here they say they only 12Gbps of 300 GB 10 k RPM sas

  My question is that these drives are compatible in a RAID5 configuration to use? or do I need another model?

  For example:

  http://www.xByte.com/ProductDesc.aspx?code=CAT_4971_45

  Readers must be certified Dell, but do not buy them from Dell. Many authorized dealers carry Dell readers - their choice is often better and their prices are almost always better than buying directly from Dell.

  As long as readers are certified, so it doesn't matter what brand/model, you get... readers CAN be larger than the original. They CAN be slower (10K / 15K), but this is NOT desirable, because your table will be made according to the specifications of the most slow/smaller disc in the table.

• R710 IDRAC6 series via ssh: connect com2 returns COMMAND NOT RECOGNIZED

  Hello

  I configured successfully on ssh several times serial console redirection on different dell servers, but now I'm stuck with two R710s.

  The problem

  I can't use the connect command:

  /Admin1-> connect com2
  cmdstat
  status: 2
  status_tag: PROCESSING COMMAND FAILED
  error: 253
  error_tag: COMMAND NOT RECOGNIZED

  Configuration

  Version

  BIOS is 6.1.0, cli version output is:

  /Admin1-> version
  CLP SM Version: 1.0.2
  SM ME treat Version: 1.0.0b

  I have configured the redirection as before:

  BIOS

  Communication series	On with the Console via COM2 Redirection
  Address of the Serial Port	Device1 Serial = COM1, Serial Device2 = COM2
  Connector external series	Remote access equipment
  Failsafe baud rate	115200
  Remote Terminal type	VT100/VT220
  Redirection after boot	People with disabilities

  iDRAC

  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialBaudRate 115200
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialConsoleEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialSshEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialHistorySize 2000
  Value of the object successfully changed

  The command is now console, not connect.

  And that's exactly what is said in the docs - it's just that I had not noticed the change and read 'connect', where 'console' was written.

  A big thanks to Lars Handrick Support Dell Germany for reporting the change of command name for me.

• Connect a Powervault MD1200 to a PowerEdge R710 5.1 running esx using SAS cables

  Hello

  I bought a Powervault md1200 and a perc h800 controller.

  I'll install the perc controller in my PowerEdge r710 5.1 running esx server.

  Then connect the md1200 to the r710 via sas cables. The powervault is no NIC.

  My question is, how to configure the RAID while booting the r710? I understand that if I were on Windows, I could use open manage but I'm not familiar with how to do this from a 5.1 esx server.

  I'd appreciate any help.

  Thank you

  Flynn

  Hello Flynn,

  What you need to do is to go into the Bios of your H800 controller and you can then configure your virtual disk MD1200.  Once you have the virtual disk created, then you will be able to do a scan in ESX & he should see the virtual disk that are created.  To access the boot controller bios you need to hit Ctrl + C to enter the bios.

  Please let us know if you have any other questions.

• Dell PowerEdge R710 - power Ricambio

  Buongiorno,
  Ho need di one ' offer by United Nations alimentatore per PowerEdge R710 con serial number FCL5WN1, dal supporto telephone Dell mi hanno detto di inoltrare the request that.
  Grazie. Saluti.
  Honeywell
  G.Casale

  buongionro, sto contattando via e-mail.

• Request alimentatore per PowerEdge R710 [CF]

  Buongiorno,

  avrei need di UN alimentatore per PowerEdge R710 take it cui service TAG e F4FRN4J, my dal supporto Dell mi hanno detto di write that. He codice che ho letto sull'alimentatore e n870p-s0, my come posso fare per sapere e thing i prices?

  In hoist foto dell'alimentatore.

  Buongiorno, the sto contattando by mail.

• (Redirected) Choose the right to the DSS for Power Edge R710

  Hello

  We have a PE R710 as a virtual host. High read/write request one of our virtual machines. Our R710 have 6 drive bays, of which 2 are used for the operating system. The R710 has a Perc 6 / i.

  I would use the other 4 Bay RAID of SSD.

  I need tolerance of failures, but good reading and writing also speed.

  I need 1 TB of space available.

  What SSD would advise you what size the readers should be and what RAID level should I go with?

  Thank you.

  Hi SEFNCO,.

  Please repost it's servers for more specialized help forum.

  http://en.community.Dell.com/support-forums/servers/

• R710/R720 - Dell customized Image of VMware ESXi 5.5 Update 2 - megaraid_sas version specific?

  That I improve a R710 and two v5.5 (Dell image) to v5.5 U2 ESXi ESXi R720 using the image of Dell here:

  www.dell.com/.../DriversDetails

  The documentation "Upgrade Guide to ESXi 5.5 using Dell customized Image" here:

  www.Dell.com/.../manuals

  indicates that a specific version of the megaraid_sas driver must be installed.

  Is the version megaraid_sas that installs with the image of Dell U2 v5.5 not the right version?

  I just ran the upgrade on a R710 and it's the megaraid_sas version installed:

  ~ # vmkload_mod s megaraid_sas | grep Version
  Version: Version 06.803.73.00, build: 1331820, Interface: 9.2 inspired: August 22, 2014

  Thank you.

  Hello

  It lists the R720 and R710 systems supported and both link to the same page, so the customized version is the same for both servers. Is the version listed in the reference guide for A02

  megaraid_sas - 06.803.73.00

  Page 5 ftp://ftp.dell.com/Manuals/all-products/esuprt_software/esuprt_virt_solutions/vmware-esxi-5_Reference%20Guide6_en-us.pdf

  This is the same version that he shows for your installation on the R710 so that seems correct.

• Reference Dell R710, Dell and VMware VAAI MD3200

  Hi guys, we have 3 x Dell R710 hosts running VMware ESXi hypervisor v5.1. Our SAN is via Dell MD3200 Direct attached storage. We have activated the option of High Performance. My question is about VMware VAAI. In particular, the recommendation of VMware: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1033665 it says: "For more information on support VAAI in a particular storage group or required firmware levels, contact the storage array provider." So I'm wondering: is VAAI supported (or not) with the MD3200... and otherwise: should I be deactivation of VAAI settings as recommended by VMware? What are the potential implications for the performance of deactivation of VAAI... or support DO NOT turn it off? Thank you, Steve

  Indeed, you are using a fairly old firmware. The most recent is 07.84.53.60.

  To be able to upgrade to this version, you will need a version quite familiar of the MDSM. I would say to download 4.1.2.29 or later, which is 5.0.0.70. All servers Windows and Linux (not VMware or XenServer) server that manage and/or are connected via iSCSI SAN should have their MDSM, updated software before upgrade you the firmware on the raid on the SAN controller.

  RAID controller firmware: www.dell.com/.../powervault-md3200

  Latest resources DVD (5.0.0.70): www.dell.com/.../powervault-md3200

• Interchangeability of equipment between r710 and m710

  Hi guys,.

  I have a few PowerEdge m710 with high spec CPU Core Hex and DIMM 16 GB which is no longer in use.

  Is it not possible to remove the CPU and the RAM of the m710 and put them in a r710? I checked the specs for both servers and they seem to work the same chip.

  I just want to double check before buying a few r710.

  The label information of service for the M710 Blade Server-based, it was delivered with P/N 2HF92 for 8 GB Dual Rank registered memory Module and P/N CG0NK X 5670 CPU. These two components are listed as compatible with the R710 server and so they can used in the R710, unless the upgrade on the same components were made with incompatible parts.