LCD blue and yellow

I have connected my HP Mini laptop to an RCA 22 inch LCD TV and everything is blue yellow.  I tried to change the color sliders and that did nothing.

It seems that you are missing one of the color channels.  VGA transmits red, green & blue on separate lines.  You can use a color bar test image to see who is missing (it'll be black on TV).  If this is the case, the likely cause is the cable.  Have you tried a different VGA cable?

Tags: Notebooks

Similar Questions

  • framed color box color changes randomly - with red, blue and yellow

    Hello

    I want the user to do something when the color box changes from black (ready) to green (together), then red, yellow or blue (go). The user wil know what colors come to them.

    The user will will push a specific sequence of buttons depending on the color.

    Success will push the sequence of buttons assigned to a specific color. There are 16 push buttons. (this is to recall and response time)

    In any case, I can write the program without problem.

    The user can test red (push a specific sequence of buttons according to red), then blue and yellow. I can get to repeat a color so they will make four tests.

    Sorry for being long-winded.

    My question is how I randomly generates a color to begin a trial.

    If this set of tests is unclear by the subject on go the color was presented randomly as a guest.

    Any help would be greatly appreciated!

    Thanking you in advance,

    NK

    If you have a fixed set of colors, put them in a table and generate a random number between 0 (Array Size-1) and an element of the matrix of the index. Multiply the random number (0-1), multiply by the rounded and maximum value at most closely to get your index.

    If you want to generate a truly random color, use the RGB color VI and wire 3 random numbers between 0 and 255 to generate a random red, green and blue component like this:

  • I have a problem with the screen turning blue and yellow.

    Original title: I'm about to crash?

    I work with an old computer of 10 years (WinXP) and recently, he has started only blue and yellow of the monitor display.  Is this an indication that I am about to plant?  This problem started when I used to try the Upgrade Advisor download Win7 Win7.  It is all too much or doesn't I accidentally deleted something that I would have kept?

    I look forward to a response.  Thank you

    If you want to run dell diagnostics from the link given, you need to install .net 4 extended (full) before you can run the diagnostics.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=17718

    After installation, there are about 9 updates of high priority you need to install microsoft updates.

  • Some of the program icons are blue and yellow shield in Windows 7

    What is the blue and yellow shield on some of my icons of programs. I can't understand how to remove the icon.

    Items with the shield need administrator privileges to run.  Most of these things will give a UAC pop-up or must be performed by right click and choose 'run as administrator '.  I don't know of a way to remove the shield, but I've never tried it myself.

  • Blue and yellow shield on some icons on the desktop

    I have blue and yellow shields on the following icons on my desktop - Microsoft Office 2007, Toshiba Upgrade Wizard, Recovery Disc Creator and Windows 7 Upgrade Advisor.  I just noticed this today.  What should I do?

    Can anyone help me please with this.

    Thank you!

    I have blue and yellow shields on the following icons on my desktop - Microsoft Office 2007, Toshiba Upgrade Wizard, Recovery Disc Creator and Windows 7 Upgrade Advisor.  I just noticed this today.  What should I do?

    Can anyone help me please with this.

    Thank you!

    Hello

    This could be a normal behavior if all of these programs require administrator privileges to run.

    Try to double click these shortcuts to see if you get the user account control window.

    Let us know.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • HP C5180 using only blue and yellow inks on Self Test Diagnostic Page

    Just bought this C5180. Having run clean print head. Checked ink cartridges are installed properly.  Run the Test of the Auto diagnosis. The six colors are, from left to right, blue, white, yellow, blue, green and yellow. Please tell us what to do next.

    Clean the contacts will not help if the inks are obsolete. If a cartridge is not recognized by the printer, you can try to clean the contacts with fluffy (both on the cartridge and the side of the carriage.) Here is a page on cleaning the cartridge contacts (C5180 cartridges are different from those of the image in the page, but more information should be close): http://support.hp.com/us-en/document/c00690750

  • Inspiron 6400 - ATI X 1400 Display Corruption: blue and yellow points

    Hello

    I recently bought a Dell Inspiron 6400 with a X 1400 ATI Mobility graphics card. As the subject says, I experience display corruption in certain circumstances, see image (I improved the contrast and brightness a bit, so the problem is more obvious); the points that appear are in yellow on light background and blue on dark background.

    What I have discovered so far:

    • It appears under Windows and Linux, using the ATI (fglrx on Linux) drivers - Linux, with the "vesa" driver, the problem does not appear or appears under Windows when setting "Enable hardware acceleration" minimum (I don't know which is the name, there's a cursor under 'Advanced' display properties...)
    • It seems to only appear when scrolling, mainly in Acrobat Reader and Firefox (using the smooth roll).
    • Corruption appears on the LCD and external monitor.
    • It's something that I can capture with a screen capture program.
    • Start the laptop hardware diagnostics are OK and there is no memory problem (ran memtest + during a night).
    • There is no other known hardware issues with this laptop (no overheating, etc.)

    Any ideas on what could happen here? : smileysad:

    Thank you!

    If more details are needed, I'd be happy to provide.

    Message edited by drk2048 on 02/25/2008 12:44

  • my monitor displays properly, the blue and yellow lines horizontally and vertically on the screen

    monitor the display that is not right, when you move the slider it filled with blue, there are blue lines across screen

    Hello

    1 did you changes to the computer before the show?

    2. the make and model of the computer/monitor?

    Note: Make sure that the cables are connected properly to the screen and try replacing the monitor cable and/or monitor itself.

    Method 1:
    Resources for troubleshooting problems in Windows XP
    http://support.Microsoft.com/kb/307960

    Method 2: Uninstall and reinstall the display drivers and see if that helps.
    (a) click Start, right click on computer.
    (b) click on properties, click on Device Manager
    (c) expand the graphics card, right click on the map
    (d) click on uninstall
    (e) now go to your computer/device manufacturer site, download the updated drivers and install them.

  • Blue and yellow shield

    The appearance of the shield would perhaps mean that someone else has damaged or not supported my administrator privileges? This image appears next to some sources of wi - fi area, and there are programs such as Windows Error Reporting is no longer usable by the hot spot of the internet that I use.

    The shield simply indicates that the button/link at the side there is a link that only system administrators can use.  It does no harm to come to your computer.

    However, this error you get when you try to use programs?

  • Strange blue and yellow image in Camera Raw

    Whenever I send a picture to the top of the bridge in camera raw, rather than see the image I see something resembling the people of sticker U of Michigan have on the back of their cars.  I use a new laptop (Asus) and with the first few images that I have dealt with, I don't have this problem.  I have no idea why this is happening and how to fix it.  A screenshot of what I see is attached.  Thank you!

    Capture.PNG

    Hi shannonl,

    Greetings!

    Please disable the use of the GPU in Bridge

    • Go to Edition > Camera raw preferences
    • Uncheck the graphic processor utilization

    Let us know if this helps

    ~ Assani

  • How can I fix the color settings when the only options are a range of blue, black and yellow

    I have recently re installed Windows XP on my Dell Dimension 3000 and the color is now off on my monitor.  The color management setting offers a selection of 16-bit and 32-bit with the a limited range of color blue, black and yellow.  I also installed Driver Detective and all the drivers appear to be up-to-date.

    Some monitors have buttons on them to fine tune the settings and get around windows.

    Check your manual homesite monitors or it's.

  • indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

    indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

    You have probably changed the OS X. go theme color in Preferences-> general systemand pass ' appearance: " "Blue ".

  • 7520 hotosmart only prints in shades of blue and black

    I'm so frustrated right now.  My Photosmart 7520 only prints in shades of blue and black, all the printer cartridges have ink. Why?

    In the paper here troubleshooting steps can help solve magenta and yellow print is not on your Photosmart 7520.  Be sure to go through all the steps in order.

  • the sites visited and unvisited are in blue and blue purplish.  I can't say these colors apart.  Can I change them?

    I can't tell the difference between the colors of the sites visited and not visited sites. (On, for example, the results of a google search.)  I am told that these colors are blue and some sort of purplish brown.  These colors (at least one of them!) can be changed?

    You can send your suggestion directly to Apple via this link http://www.apple.com/feedback/

    We are just users like you, so we are powerless. In the meantime, you can try many accessibility options that are available in system preferences.

  • Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

    So I'm really frustrated. I got my Macbook pro less than a year ago and Ive already had to get a bunch of replaced parts. I got my computer fixed as 3-4 weeks ago and they had to replace a lot of things (can't remember not what it was, but they had to remove all of the computer and replace some things that have been associated with the battery power /). Recently my computer did this weird thing where the screen freezes and pixelated pink and yellow lines will take right on the screen. In addition, the trackpad will be just stuck and I have to turn off my computer and turn it back on so that everything works. Someone at - he heard about something like that? I thought that maybe when I had my computer repaired they didn't replace not all properly? I did a check of the hardware on my computer (self-control an Apple recommended prior to an appointment at the Genius Bar) and he said that everything was going well. This poll looks like a hardware problem? Could this be a virus? Someone hack into my computer? I don't know, I'm just worried and frustrated :/

    Thank you!

    Photographing display abnormalities and make an appointment at an Apple store genius bar.  You are still in the warranty period and you have the properly repaired MBP.

    Ciao

Maybe you are looking for