Re: Satellite M300 - should I replace a damaged LCD screen?

Similar Questions

• Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem

  I am the owner of a SATELLITE U200 and I would use it with an external LCD display.

  The external monitor supports up to 1920x1080@64Hz.

  When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range of the scale. However, by selecting 1400x1050@60Hz seems to work very well.

  My question is: is there anyway I can get the 1920x1080@64Hz option working properly?

  Some info about my following system:

  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS Version 3.70
  Video Mobile Intel (r) Express Chipset Family worm = 6.14.10.4631 945GM (* even if intel provides versions of this driver newwer, this is the last custom by toshiba *)

  Intel(r) Graphics Media Accelerator Driver for Mobile report

  Report date: 13/03/2009
  Report time [hr:mm:ss]: 11:24:18
  Driver version: 6.14.10.4631
  Operating system: Windows XP * Professional, Service Pack 3 (5.1.2600)
  Default language: Spanish
  DirectX * Version: 9.0
  Physical memory: 1015 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 128 MB
  Used graphics memory: 14Mo
  Processor: x 86 family 6 model 8 Stepping 14
  Processor speed: 1828 MHZ
  Vendor ID: 8086
  Device ID: 27A 2
  Revision of the device: 03

  _Accelerator Information_
  Accelerator in use: Mobile Intel (r) Express Chipset Family 945GM
  Video BIOS: 1358
  Graph current mode: 1920 x 1080 True Color (64)

  Connected to the graphics Accelerator_ _Devices
  Active monitors: 1
  Active screens: 1

  _Monitor_
  Name of the monitor: Plug-and-Play monitor
  Display type: analog
  Gamma value: 2.20
  DDC2 Protocol: support
  Maximum Image size: Horizontal: 20.0 inches
  Portrait: 11.0 inches
  _Monitor Modes supported: _
  640 x 480 (60 Hz)
  640 x 480 (67 Hz)
  720 x 400 (70 Hz)
  800 x 600 (56 Hz)
  800 x 600 (60 Hz)
  1024 x 768 (60 Hz)
  1024 x 768 (70 Hz)
  1152 x 864 (75 Hz)
  1280 x 1024 (60 Hz)
  1280 x 1280 (60 Hz)
  1440 x 1440 (60 Hz)
  1920 x 1080 (60 Hz)
  1920 x 1080 (64)

  _Display power Management Support: _
  Standby mode: not supported
  Standby mode: not supported
  Active off the coast of the Mode: supported

  _Notebook_

  Name of the monitor: Plug-and-Play monitor
  Display type: digital
  Gamma value: 3.54
  DDC2 Protocol: support

  _Maximum image Size_
  Horizontal: Not available
  Vertical: Not available

  _Monitor Modes supported: _
  1280 x 800 (60 Hz)
  Display Power Management Support:
  Standby mode: supported
  Standby mode: supported
  Active off the coast of the Mode: not supported

  Thank you in advance!

  It s nice that your monitor supports the screen resolution 1920 x 1080, but you should check your owner's manual.

  On page B-4, you will find a list of the supported screen resolution and I must say that the resolution 1920 x 1080 is not taken in charge.
  You can select 1920 x 1440 but not 1920 x 1080.

  Sorry, but the material doesn't supports his screen resolution.

• Re: Satellite A100 - cannot get video off the LCD screen

  Hi, I'm fixing a Satellite A100 for someone. I can't get the video on the LCD display, an external monitor, either the s-video port.
  The system turns on and you hear the fans from the looks of the lights, the HDD seems to start windows.
  I reinstalled the two RAM modules and tried to use the FN + F5, but no luck.

  Is there a common problem with these machines?

  Thanks in advance.

  > Y at - it a common problem with these machines?
  Sorry but I don't understand this question. I have 3 years old A100 (PSAA9E) and it works perfectly. If keyboard suddenly stop to answer should I think it may be a common problem with this model of laptop?

  Back to your problem: FN + F5 will work if the operating system is fully loaded. You hear sounds? You don't see anything on the screen?
  Experiment with RGB port also.

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

• Satellite A200-1DY - file iastor.sys damaged when installing XP

  Hello Toshiba users.

  I bought a Satellite A200-1DY and I want to install Windows XP 32-bit. I used nLite to integrate controllers Manager storage, but when I boot the CD of Windows XP sudenlly it says that its corrupt iastor.sys (damaged in Spanish).

  I wonder if its because only the file storage manager has two options the ICH7M and ICH8M and I don't know which to incorporate (I joined the ICH7M) or maybe the Windows XP that I use is the problem, but I tried diferent ones. Should I replace the file iastor.sys in the CD with the one I downloaded from the Toshibas Web page? If this is the case, where can I find this file on a Windows XP CD, I mean what dir?

  If I'm not good as I say again once the problem is that the file iastor.sys is corrupted and it won't let me format my c drive to install Windows XP. Hope you can help me please, I would be very happy I'll be cheking the forum every day for today

  cyaa

  Hey Buddy,

  Satellite A200-1DY is equipped with Intel ICH8M chipset so I think that s the problem because you only integrated drivers SATA ICH7M

  You should try to create the disc using nLite and then include only files ICH8M.

  You can download the Intel Storage Manager driver on the official website of Toshiba. It contains the correct and pre-tested driver for your model of laptop.

  Check this box!

• Satellite M300 - card info required Intel 5100 WLAN

  On the mobo Intel 5100 wireless network card or is it a card?

  I'm under puppy Paulinette 5.6 Kernel 3.4.52 #1

  On a Satellite M300 PSMDCA - 81900C with harman/kardon speakers.

  PC only provides encryption WEP or none
  Ph Android 4.x provides only for WPA - PSK or none

  Can not get the iwlwifi driver set up with WPA - PSK TKIP because the driver is not updated to the core 2.x
  Must run o' open wise of network or cable.

  Happy to get card later if he will enter the zone, just need to know in advance how the thing is put together. Assume that it is a PCI express bus?

  If it's a card, feel free to recommend a compatible replacement who will give me what I want.

  Also, using a R8792SU usb device, it becomes very hot and doesn't connect at all.
  The peripheral Intel also seems to have failed, it detects the network but will not connect.

  > Glad to get card later if he will enter the zone, just need to know in advance how the thing is put together. Assume that it is a PCI express bus?

  The wireless network card is a miniPCI module and can be removed. It should be placed at the bottom, near the memory modules
  Check this pic: [Satellite M300 - below | http://www.irisvista.com/tech/laptops/Toshiba-Satellite-M305/top-cover-big/remove-laptop-top-cover-06.jpg]

• Satellite M40-136: network card is damage

  Hello

  I have a satellite M40-136, which is a little more than 2 years. I have cable broadband installed and this had led me to discover that I have a problem with my network card (a Marvell Yukon map I think).

  I had guys on the network at work to check the laptop and they say either the network adapter connection is loose or the card is damaged.
  I rang one of their guys said tech that I need a new main board because the network cards are integrated on all laptops and PC WORLD.

  Is this correct? If it is then it will cost an arm and a leg to fix it.

  Nicky

  Well, that's good.
  Map of LAN (RJ45) is soldered on the motherboard.
  Perhaps an independent technician with experience might be able to solve this problem, but in general, the motherboard should be replaced.

  The motherboard is one of the expensive parts and you are right; the new Council is costing a fortune

• Updating BIOS for Satellite M300 PSMDCA-03700R

  I'm looking for a BIOS update for my Satellite M300 model: PSMDCA-03700R, but could not find my model on the support site. I wonder what model should I choose when searching for the upgrade of the BIOS?

  Do not upgrade BIOS is there is no reason for this.
  Have you noticed a few problems with your machine?

• Satellite M300 - cannot roll back WXP selected restore point

  I use a Satellite M300 with XP
  for no reason, I lost my printer (USB) connection and decided to do a restore to solve
  I tried to restore in 4 different points in January, but each time, he said, that he cannot do?

  have not hit this one before
  any suggestions welcome

  Thank you
  Keith

  In my opinion you have no other options.
  Something seems to be wrong with the restore points created in the past
  Looks like you'll need solve the problem of USB printer in the other direction.

  First of all, I recommend you to clean the system using CCLeaner or other freeware software but CCleaner is one of the best and free.
  Then I recommend you to uninstall the installed printer software.
  You can repeat the cleanup using CCleaner to remove all traces of the software of the printer.
  Reboot several times.
  Then, you could install more printing software you can also consult different USB ports if it should not work

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• Satellite M300 - screen flashes white

  Toshiba Satellite M300 on 18 months old (using Windows 7). Display has had intermittent problems. Screen flashes to a white screen. Now if the lid is moved while he was working, "white" screen completely and returns to normal when returned to 'the sweet spot '!

  Have not yet tried another monitor. Driver is up-to-date. Assuming that maybe it's a "bad connection". Use turned off with the closure of the lid that changed tonight.

  Any ideas? :)

  Hi KezRev,

  Theoretically, it could be a problem of connecting cable or internal problem display but you should test another monitor first. Just connect an external monitor to check the image here.

  If the external monitor works properly it s the LCD cable internal or visualize a malfunction. So, contact a service provider and allow technicians to check your laptop. They can fix this problem and order new parts. :)

• Satellite L850 - how to replace a HARD disk recovery partition?

  Hello.

  Toshiba laptop Satellite L850. PSKDGA-02Y012. The original HARD drive has failed in his colleagues even mobile, so we replaced the two HARD drive after you have created a recovery USB. When used to restore the operating system to original status of OOB.
  That has worked and portable runs much, but now I want to BACK the recovery partition (now only on the USB I think) for the new HARD drive.

  Simple to shrink the disk HARD C: (partition 2) on the HARD disk, but then how to transfer twhats on the USB (USB recovery stick) back on the HARD drive?

  Thanks for any help.

  Karim...

  Hello karim

  When you buy the notebook you will get it with preinstalled operating system (recovery image). Original recovery image is saved on the HARD disk on the recovery partition.
  Each owner of the laptop has option to make the backup recovery image and create recovery media. It could be the DVD or USB support. You can do this by using preinstalled Toshiba recovery media creator tool.
  This tool will create bootable recovery media that can be used for the installation of original image recovery if there is problem with the installation of image disk HARD recovery or when the drive is defective and must be replaced.

  Where the HARD drive is faulty and should be replaced or the owner of the laptop to upgrade HARD drive, you can install original image created using recovery recovery media (USB). After installing recovery image, you will have the same situation as for the first boot after the purchase of the laptop. With other words notebook will have factory settings again.

  In this case original recovery image is already copied onto the new HARD drive and you will also be able to start the installation of HARD drive recovery. There is therefore no reason to copy a recovery on HARD drive media.
  Please note: installation of HARD drive recovery works with the factory only settings.

  If you have any other questions do not hesitate to ask.

  Good luck.

• Satellite M300 guarantee for a power adapter broken?

  I have some problems with getting a new power adapter.

  First of all, I don't know if the warranty covers the power supply.

  Second, even if it does, the warranty (I bought a Toshiba Satellite M300, which came with a 1 year warranty, about 360 days ago) may expire before I can get the card sent to a Service Center for repair of toshiba in Victoria (I live in Tasmania.

  Thirdly, I tried to call until the call line of Toshiba which was given to me by the store, I bought the laptop, but after having pierced the numbers to get a representative human (and I tried several combinations) I had absolute silence from the other end of the phone, so I can't get all the answers to all your questions and I have no idea where to send the broken adapter.

  So wherever I need to send my adapter, it can be sent at the time, I will be actually return a new power adapter and is there anything else I should do to get it?

  Hello

  First of all:
  Yes, the power adapter is covered by warranty (if the warranty is valid) as the entire notebook

  Second:
  The standard warranty is one year. So if your warranty is still valid you should get in touch with a local ASP (certified partner) in your country and have to ask for help.
  The right ASP can be found [here: http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT]

  Third:
  See point 2, you must contact a local ASP.

  Welcome them

• Satellite M300 - external speaker buzz

  New Satellite M300. Internal speakers work fine.
  Plug in external speakers or headphones and there is a VERY loud humming noise (sounds like radio static noise) and a very low sound from the source.

  What is a sound card configuration problem?
  How should I do? What is a defect in the computer?

  Have you checked all the available sound settings or not?
  Did you also check player settings?

  Bad general condition is for me? Are you listening internet radio? What are you doing exactly?