LCD SCREEN?

Can someone tell me if any LCD Xoom would fit in my fe? The outer pane is fine, but some how I broke the inner part. Also can someone tell me how to open this thing? I checked everywhere, but nobody seems to know except Motorola.

Thank you

Losh CM

Tags: Motorola Phones

Similar Questions

  • Satellite PRO U500 - LCD screen size is reduced

    Hi all,

    I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
    The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
    Is there a solution to my problem? I have to send in the audience?

    Thank you for the help
    Giuseppe

    H

    It is really strange, especially if you see the same thing in the BIOS settings?
    Since when did you notice this behavior?
    Do you use pre-installed OS original you got with your laptop?

    Have you done something that may be responsible for the issue described?

    I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

  • Re: Satellite M300 - should I replace a damaged LCD screen?

    My LCD screen is damaged and almost impossible to use. The laptop is still under warranty, but I understand screen damage are not covered. I don't know even how it happened. I'm not aware of any bump or impact to the unit.

    It is better to spend the money to replace the screen or it would be cheaper to buy a new computer? It is a spare computer that is only used if I am away from giant, holidays, at hospital etc.

    That the cost would be about, in Australian dollars?

    Thank you
    warrawillah

    Hi warrawillah,

    I think that it of difficult to tell if you need to replace the screen or buy a new computer. In my opinion it s based on the price of the new view.

    You need to contact a service provider authorized in your country. Guys can order all spare parts and if you want to replace it also.

    Good luck!!!

  • LCD screen turns off without reason - Satellite M40X

    I have a problem with my laptop Satellite M40X, I work when the LCD turn off and I hear two PIF. To turn on the LCD screen I need to restart the laptop, but the problem persists after a few minutes.

    Can someone help me, please.

    Hello

    Here you can compare the version of the BIOS installed on the laptop with the one published on the page of the Toshiba driver.
    If you use the older BIOS, you can try to update. Maybe the update will sort this strange behavior.

    But there could also be a hardware malfunction if the BIOS update does not help.

  • Portege R100 video cable does not reach the replacement LCD screen

    Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

    Here are 2 pictures of what I mean

    Hello

    Where did you buy this screen?
    Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

    Looks like it s not fully compatible
    However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

    In your case, I recommend you contact the guy and ask for compatible cable!

    Welcome them

  • Satellite 5100 - LCD screen no longer lights

    Hi, I hope someone will help me on this problem.

    After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all

    Hi stefano88,

    Why you have disassembled the LCD?

    To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.

    Can post you a photo of the cables you want to say?

  • Equium P200 1ir - where can I buy cable LCD screen

    Hi all

    I have an Equium P200 1ir and my screen has been crazy, color errors everywhere.
    I followed the problem down to be a cut wire in the cable of the internal lcd screen.

    My question is: where can I buy a cable lcd screen replacement for this machine that the screen itself is fine.

    I have searched all over the web and have had no joy. If possible can someone Toshiba advise me to buy the lead...

    Thanks in advance

    Antony

    Hello

    All laptop parts can be ordered from a local Toshiba authorized service provider.
    The ASP in your country should be able to help
    If these cables is not available or not on stock, then guys would be able to order this Toshiba head stock

    Have a look here to find all of the ASP in the world:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  • Satellite Pro U300 - the broken LCD screen

    Hi all

    My first post please bare with me.

    I have a Satellite Pro U300, who has a broken LCD screen.
    I have a replacement screen, but not sure how to go abouts it change places.

    Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

    Any help would be greatly appreciated.

    The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
    On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

    I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
    On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

  • Part number 2006 imac 17 inch lcd screen

    Hello I have a question to try to get the correct part number Apple for a replacement LCD for my iMac Early 2006 17-inch 2.0 GHz model A1208 screen please?

    And yes my computer developed the vertical lines that eventually became half of a black screen, and although I can connect on my old iMac and see half of my office, I notice that I can not open the photos or images.

    So, I'm now trying to fix it.

    If you know what Apple suggested replacing correct these bad LCD screens, I would really appreciate it!

    Thank you!

    -Peggy neck in Northern Virginia

    Check with ifixit.com. they should know and maybe the part.

  • Tecra 9000 - no display on the LCD screen when you turn on

    I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

    The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

    After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

    Someone at - it suggestions? This is a problem for others here?

    As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
    Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

  • Bad monitor or LCD screen cable on Qosmio X 505?

    Looking for a little help to solve my problem.

    About six months ago my web cam log if I moved the monitor back or front. A month or two later the monitor should fade a bit. I have to move the monitor to restore its brightness. The monitor will now completely black if moved. I have to close it and open the lid (monitor) completely so that he could appear at the back and it still does not work the first time... I am running an external monitor via HDMI to avoid the problem... I really need to this address.

    This sounds like a cable of the LCD screen or a monitor problem? Looking at what part to replace everything first.

    Thank you for your time.

    You know very well that this virtual path no one can say with certainty what the problem and this question must be verified correctly.
    I put t know why you don t tell us what model of laptop you have.

    Anyway, if you have the new Qosmio notebook with valid warranty I recommend to contact the nearest Toshiba service provider and let them solve this problem. Warranty will cover all costs.

  • Satellite A100 - display balack after replacing the LCD screen

    Hello

    So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

    When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

    I think it is the inverter, any suggestions?

    Could be the sensor cover?

    Thank you! Kyle

    Hi Kyle,.

    Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

    Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
    Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

  • LCD screen moves on my laptop satellite

    Hello!

    LCD screen of my laptop is moving! It looks like its not glued to the screen!
    His works always fine, but it's a little boring.
    I just discovered it a few days ago and worried. Is there something I can do?

    Thank you!

    Hello

    This issue is not known to me, but it certainly isn't usual display behavior. You can try to check on an external screen to see if there is the same situation. If the external monitor everything works fine, I imagine that the LCD monitor may be defective.

    Make sure you also all the display settings are right (resolution and color quality).

  • New LCD screen of need for Satellite L20-173

    Can anyone help I need to get a screen for my laptop everything else works fine, I can have someone
    solve this problem for me when I found one and what is the cost?

    The specs for the laptop are model L20-173.

    Hello

    If you want to buy a new screen, you can order this part from the provider of service authorized in your country.
    But are you sure you want to buy a new piece? The LCD is one of the expensive parts for laptop and it will cost you a small fortune

    Instead of buying a new game, you can try to search the second hand LCD!

    A new 15 1024 x 768 LCD display cost about $ 300
    http://www.screentekinc.com/Toshiba_Satellite_L20--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  • LCD screen flashes on Satellite 2450

    my laptop model is satellite 2450...
    recently, my lcd screen is now flashing...
    yesterday it worse... Keep flashing up and down very seriously...
    around a few minutes later... the screen is done... but without the backlight everything barely be seen now because of the conditions without backlight...

    Wat kind of problem, it's...?
    all I can do about it?

    If I send to repair... how much will it cost? or rather I just buy an external lcd to plug?

    Hello

    Of course there is a hardware malfunction. The best way to know what may be the problem is to contact the Service of your country partner. In my opinion, it may be some problem with FL inverter and it must be changed.

    As I said contact Service partner. You can find one under section http://eu.computers.toshiba-europe.com support & downloads.

  • Satellite Pro L10: I am looking for a new LCD screen

    Hello
    I am looking to buy lcd screen for my machine L10 had been broken in me. I don mind to buy second hand. is it possible to help me.

    Will be very grateful to you

    There is not much help. Either you contact Toshiba service or you can check if you can order LCD of some independent hardware for laptop store.

    I put t know in which country you live but Google a little and see if you can find a PC shop where you can order parts for your model of laptop.

    BTW: do Exchange you view-only?

Maybe you are looking for

  • Thunderbolt display does not office

    My Thunderbolt screen stopped yesterday afternoon while I was working in quickbooks. I bought this screen in January 2016 and has occasionally turns off and on again without reason apparent. This time it just came down. I took these steps and now hav

  • HP Deskjet 3051 a won't scan to my computer

    Hello, my mother gave me this printer, it was previously connected to his computer, and when I try to scan on my computer it says "not found computer. Ensure that HP software has been installed on the computer. "How to install the HP software?  It pr

  • McAfee has continuously detects svchost.exe as a virus on XP

    Hello I have Win XP as my OS & Mcafee man. 8.5.0i my protection against the virus. McAfee has continuously detects svchost.exe virus (detected as Boaxxe.dr) in C:\Documents & settings\temp\ *. Can anyone help me in this matter. ConcerningMukesh

  • You are looking for a monitor with USB ports side

    Hello I am currently using a 2208WFP who starts to go bad on me.  I like the two USB ports on the side for flash drives and cameras.  I looked on the website and I don't see with the side USBs.  Is there anything I'm missing? Ideally I'm looking for

  • We can monitor Temp of TMS endpoint directly

    Endpoint as C20/40 will show temp. on the State of the system. Is is possible or will it become a roadmap to TMS to keep an eye on the temperature. change?