LEAD codecs for playback MotionJPEG-Premiere Elements
There are several reports online (here and elsewhere) recommending installing Codec of LEAD for reading items MotionJPEG-first problems. Most, if not all, the feedback is that it works and that it is only $10 $ USA.
Today, I went in search of this codec LEAD technology and could not find a Codec of LEAD $ 10.
http://www.LEADTOOLS.com/SDK/multimedia/multimedia-MCMP-MJPEG-codec.htm
Instead, I found a lot of kits to the average price over $ 100.00.
With the chat on this website service, I discovered that the LEAD codec is no longer sold separately. In order to get this codec, you can buy the Kit of Homeless Multimedia (priced at $595.00).
Suggestions for workaround
OR
pay the $595.00 for the LEAD Codec
OR
follow the path of the file to the MotionJPEG conversion?
RTA
RTA,
On the forum of PrPro, most users have got excellent results with the MainConceptor Morgan. Sorry to hear that lead CODEC is only available as part of a US$ 600 "kit".
Good luck
Hunt
Tags: Premiere
Similar Questions
-
Just place an order for Photoshop and Premiere Elements. I ordered in error windows version. I need to change the Mac version. Already obtained serial numbers, but I have not downloaded anything. I called the customer service that they me transferred to HIM and HE asked me to go to the cat. Chat is always busy. How can I change the version before you download?
Javifran1234,
To cancel or change orders online, please visit this link:
Cancel or change orders online
Guinot
-
New MacBook Pro GPU compatible for playback in Premiere Pro CS6 Mercury engine?
I am considering buying a new MacBook Pro (15 in., processor 2.8 GHz quad-core Intel Core i7, 16 MB of RAM) to mainly video edditing with Premiere Pro, I have the CS6 vertion. I wonder if its Mercury playback engine support GPU?
The laptop I think uses this two graphics cards:
- Intel Pro Iris graphics card
- AMD Radeon R9 M370X with 2 GB of GDDR5 memory
In the list of system requirements for first Pro CS 6; Premiere Pro system requirements for Mac OS and Windows is said "AMD over-pants" recommended for Mac and AMD Radeon GPU Acceleration (as the Mac comes with) is listed under Windows. This makes me wonder if the new Mac support the maximum speed for the Mercury playback engine?
In any case, I would appreciate your views as oppon whitch GPU card you guys recommend for a MacBook Pro work best with Adobe Premiere Pro CS6?
Hello
Only these cards are supported for CS6
- AMD Radeon HD 6750 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
- AMD Radeon HD 6770 M (only on some MacBook Pro computers running Mac OS X Lion (10.7.x) with a minimum of 1 GB of VRAM)
Premiere Pro system requirements for Mac OS and Windows
Vinay
-
I bought an official copy of the premier elements 13. I have my serial number etc, but when I validate my sign to throgh my internet connection, nothing happens. It's a nightmare! I can not even find a way to generate a code of rerquest for valiodation offline. by clicking on 'generate the response code' does nothing. I have jjust spent £79 on this product. someone help please. is nothing wrong with my internet connection.
Pauld
You do the install with antivirus and firewall disabled?
You work in a school or company network?
You install from the installation files or the installation disc?
If all else fails, then, Adobe is the only person who can help you. In this case, please click on the following link
First Elements
Adobe ID, signature in
Adobe ID, login, account help
Panel discussion
If the link does not take his game, then you will need navigate in the Chat panel using the links above as a guide.
Please let us know the result.
Thank you.
RTA
Add on... This isn't Adobe. Instead a user.
-
How can I get black leader in my project with Premiere elements 14
I need to get the black leader
Click on the button Panel Options in the upper right of the media project Panel, and select new point/black.
-
lock audio for editing in Premiere Elements
I'm creating a slideshow with Pan and zoom so that importing video clips. I created a "Bo" with music imported audio titles 2 and 3 and manually 'mixed' music for the audio clips appear "staggered" on the timeline (that is, a partial song on the track 2), following partial song on track 3, next partial song on track 2, etc. I manually entered time markers for my planned video changeset (as I did for all my projects NLE software on other platforms). However, every time I shorten a video clip, all the contents of tracks audio 2 and 3 moves left proportionally. And of course then my time for the rest of the project markers don't line up. It's completely maddening. I can't find a way to "pin" or "lock" the audio tracks in the timeline. It is not even a video accompaniment for these tracks - just music. Whenever I have shorten a clip to match the beat, 'the most' me and moves all future audio out of sync. And I have to shorten each clip because, for still images, the duration of the clip is defined when the stills are 'imported' to the project. There must be a way to disable this audio floating. Any ideas...? I would be grateful...!
Welcome to the forum.
Unfortunately, pre does not lock the tracks, as does PrPro. I asked for this feature for several years and for each new version of pre, because I believe that it is very important and useful.
Usually, I added my Bo as the last thing I do, just before I / the share of exports, so it doesn't bother me that much, but do what you are, or if you're doing a music video, then being able to lock these Audio tracks (I Lock the video tracks in PrPro too often), would be such a useful feature.
We will seek a way to get what I think you want, as a few extra steps could make life a little easier. You have your 'mixed' on two separate Audio tracks Audio Clips. You have edited them, as you wish. I would think any export/share JUST the Audio to 48 kHz 16-bit PCM/WAV format. That effectively blend your two tracks of Audio in a single stereo file. Then you can import the output file in your project, by replacing the two tracks of Audio Clips. In a single file, it won't move, when you change your video. Two things to consider: in the output file, you will probably lose your markers to beat, but can add those back, and when you go to edit the Clips, which are "covered" by the other Clips, some of the change in functions do not work, just as they did when they were not covered, such as delete and close Gap - the gap will not close. It would be even, if you had a video Clip above that you were editing. Still, for most editing functions, which is not a problem, but that will depend on how you edited your Clips at this point. For still images, you can Ripple edit and change up/down time, as needed. If you work with video Clips and have enough additional images (called handles, when dealing with Transitions), you can do the same thing with them. If they don't have adequate management, you may have to mix things up a bit everywhere.
By exporting/sharing the Audio in a single file, you have, in essence, locked this Audio track.
As a side note, some users have met problems with both of the fixed Audio tracks, music, and Narration. The usual "fix" is to use one of the 'regular' free just Audio tracks - just like you have already done. I refrain from using the soundtrack or Narration (though I've never had these problems), because so many others have reported them.
Good luck, and maybe, we will all be lucky, and Adobe will honor some feature to track locking requests.
Hunt
-
I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?
Rickey
Thanks for the follow-up report.
Just a lit bulb. Maybe the answer, maybe a spleen.
Look carefully at the audio track of the timeline in the vicinity of title of the file.
The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where
the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with
Volume: level as shown in the screenshot.
Hope it's the factor involved.
RTA
-
Premiere Elements 8.0 very unstable for me
Hello
I bought recently from Adobe Premiere Elements 8.0 (yesterday) and have had some problems with it. I scoured internet solutions but came the voids. Here's hoping that is going to help.
I was able to do a small project (45 second video) with the demo. When I buy the full version and start doing more (not much, just a minute and a half of video) he started giving me problems.
1. I can't do anything once I have more than 80 seconds of video in the timeline with to get the message 'very low on system memory.
I deleted all the services I don't need
cleared out the msconfig everything
played around with the size of swap file
tried to export the 80 seconds of video to an avi file to remove all clips
Remove the Vista to the point that it looks like xp
removed all media except what I needed for my video of the Organizer.
None of these help, I can get the out of memory message each time.
2. in the attempt to debug this issue, elements would break frequently lose my evolution and give me a window of "report this error.
3. each time a clip that I had added to the script several times before will give me a message "not supported of the codex", and I have to close the items and restart so that it can add.
4. whenever I did a right click on the window that contains my support and select 'View details' program just closes.
Machine features:
I have a Gateway (model GM5632E) PC
Processor Intel core 2 quad Q6600 @ 2.4 GHz
3 GB RAM
500 GB HDD (WD5000AAKS-22TMA0)
NVidia GeForce 8500 GT
Vista Home Premium
32-bit operating system
That's all I think. If anyone out there has discovered a miracle cure (in addition to the replacement of my machine ) let me know.
Thanks for reading.
Corey.
Thanks, Corey, but you get to the core of the problem in your first post.
These "webbie" pocket cameras, like the Vado, the Webbie and the Flip, don't produce editable video. They are made of just shoot and charge on YouTube. If you can change it at all, it's with the software, if any, that comes with them.
The codecs are designed for compact storage and are often owners.
As for the Flip, the best solutiion is to convert these cams in DV - AVI video, before put you in Premiere Elements, by the fair questions to the right of this forum.
-
Adobe Premiere elements 12 freeze during playback
Hello
I use Adobe Premiere elements 12.0 for about 2 years on a number of devices. I just bought myself a new machine of the host/music studio - Dell XPS 8900, i7 - 6700 k Skylake, 16 GB RAM, soundcard Realtek, double video (vga screens), a VGA port on NVidia Ge Force 645, the other running the INtel HD integrated graphics card displayport VGA.
In any case, on the new machine, I see issues with reading gel every 20 or 30 seconds at random, how I have to start it up again.
It's a bit annoying when trying to evidence look an article, but not the end of the world.
I tried made using another sound card, disconnect the audio (I read on some issues from Realtek), uninstall and reinstall the program. Nothing has worked yet.
Thanks for any help.
OK, for those who have the same problem. I solved mine away from the integrated Realtek audio device. I just ran across the same video for an hour with all the time.
I know that Realtek has caused problems in the past of my reading on this topic and he has certainly proved the case with me. It is a terrible device anyway, so move my audio from the PC to the sound card that normally, I reserve for my recording studio work is a bonus.
-
Is there a download or update available to use my products that I bought some time with Windows 10?
No.... Adobe does not and will not return two updated versions of the programs to work on Win10
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
As far as I know, version 14 of these programs have been updated to work with Win10
-Purchase of http://www.adobe.com/in/products/photoshop-premiere-elements.html
-
The use of Premiere Elements for the first time, cannot open the prproj file
Help! I use Premiere Elements for the first time, and I can't open a prproj file
You're absolutely right, prproj's Premiere Pro.
-
I got the message during the opening of a new project in Adobe Premiere elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary. I tried several updates but windows7 does not detect an update. What can I do?
Update your graphics driver.
-
I bought the Adobe Premiere elements 14 for my MacPro but the download is for Windows. How can I change the download for MacPro?
You can download the Mac version at the bottom of the link:
Download Photoshop Elements | 10, 12, 14, 11, 13
If the serial number you purchased is for PC, you will need to return the product and exchange it for the Mac version.
-
I bought Adobe photoshop elements 14 elements of first adobe 14 for my pc at Best Buy. It took me a redemption code and gave me a number of series, but when I click on download it gives me this message. This serial number is not valid for Adobe Premiere elements 14
Please see
Also, make sure that you do not enter a serial number Photoshop elements 14 for the first 14 elements. If a serial number is not accept then enter the second serial number and check.
-
Work with the HP Envy laptop. Have serial numbers for first 13 and 13 Photoshop elements. When I try to download Photoshop Elements the system wants to download Premiere Elements. Could you please tell me where to Photoshop (for photos, no videos).
PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
Maybe you are looking for
-
HP 110-243wb desktop PC: can I upgrade the ram and memory of my HP 110-243wb desktop PC?
Can I upgrade the ram and memory of this HP 110-243wb desktop PC? What suggest you and you thank in advance.
-
HP Envy 5300: HP Envy 5300 and connection of Windows 8 stall
I wanted my 5300 put in place on my wifi without problem for a few months after I bought it. However, aftering installing some updates from HP, the connection between the computer and the printer played upward. I received a message from the printer o
-
I'm trying to insert a cluster in a SQL database by using database connectivity tools. I get an error (attached). See attached the code I am using
-
Hello Is it possible to easily navigate around large vi? I have a huge structure case containing many layers and that I created at the same time of Subvi in a few separate cases. Is there something like the "MS Word document Explorer", or a way of ma
-
Cannot print in gray scale it goes back to the color
Original title: printer When I try to print to fax by default, if I try to print in gray scale that it goes back to color. How to fix this?