Leader of left is no longer present

Similar Questions

• The command line is no longer present when I connect on Firefox. Have to go through the history and home to see. Can you help me?

  My command line is no longer present when I connect on Firefox. Only the most top line (Firefox, file, editing, etc.). The only way to get to my start page is by going into the history and press Home.

  This has happened

  Each time Firefox opened

  == When I upgraded to the latest version, I think

  * Make sure that you have the Navigation Toolbar and other toolbars visible:  View > Toolbars .
  * If items are missing then see if you can find them in the  View > Toolbars > Customize  window.
  * If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
  * If you do not see that item then click the  Restore Default Set  button in the View > Toolbars > Customize window.
  

  See also back and front toolbar buttons or others are absent and controls, buttons and Toolbars Customize Firefox
  ---
  http://KB.mozillazine.org/Toolbar_customization

• Where to adjust the volume on my Inspiron if the icon on the taskbar at the bottom is no longer present

  Where can I adjust the volume on my Inspiron if the icon is no longer present on the taskbar at the bottom?

  Hello doctor,

  Control Panel / sounds / playback.  Double-click the device you want to operate.  Click the level and place it where you want and that should take care of it.

  To solve the problem of the icon, see http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/how-do-i-restore-my-volume-control-icon-on-my-task/a4f239ef-2d7d-47c3-87d7-18213f843885.

  I hope this helps.

  Good luck!

• User accounts is no longer present

  There are two user accounts that no longer appear when I turn on the machine. I searched for them and they are always present on C: but I can not change user. When I go to the user accounts the icons are no longer present. How to enable these to appear again without creating a new account

  Suggestions:

  Go to safe mode.

  Restart the computer > immediately and repeatedly by pressing the F8 key until you see a black and white screen. It's your safe mode > down and select Mode safe mode with networking.

  While in safe mode with networking...

  1 make sure that your computer is clean. Run a full scan.
  If you want, install Malwarebytes to help you do it. It is one of the best.
  http://www.Malwarebytes.org/products/malwarebytes_free

  Choose the FREE version.

  2. always in safe mode do a system restore. Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  3 If the first 2 methods do not resolve the problem, do a file system check to find corrupt files. He will try to fix it if it is found.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

• Wireless adapter is no longer present in the Device Manager

  Hello

  I have an Asus laptop 1015E (http://www.asus.com/us/Notebooks_Ultrabooks/1015E/#overview) running Windows 8.  I don't know when it happened, but the built-in wireless adapter is no longer present in the Device Manager.  I tried to use the Asus install app to reinstall the driver Asus Wireless Radio control, but it just says: it is already installed.  I also went to the site of asus via an ethernet connection and tried to download the latest drivers for wireless card, but installation cannot.  It seems as if the laptop detects most hardware, so I can't install driver software. Any ideas on how to proceed?
  Thank you

  Hi wolves.

  Do you receive an error message/code?

  When a device does not work, it's mostly because the driver has been corrupted.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  Check out the link and follow the steps in the article:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows-8/fix-network-adapter-problems#

  Method 2:

  You will need to install the Chipset Drivers first and later network adapter drivers.

  Reference:

  http://www.ASUS.com/us/supportonly/Drivers_For_Win8/#support_Download_36

  Method 3:

  Check the BIOS of the laptop to check that there isn't an option to toggle the map.

  Note: You can contact the manufacturer of the computer, if you are not comfortable access or make changes in the BIOS.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In addition, contact the OEM of your system and see if they can replace the adapter or run a test to make sure that the adapter is working properly.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• scan option is no longer present in the form of initial start-up of HP6510 & HP Assistant does not

  Hi, can someone help me. As the subject suggests, is no longer the scan option appears in the form of start-up generated from HP 6510 shortcut icon. Has worked OK for 3 months, but just stopped. I can still scan using the icon separate scan HP through programs but do not understand why this has changed. I also noticed that the HP Wizard does more either. Any ideas?

  Using Windows 7 64 bit and reinstalled the software disk. Use the printer/scanner wireless.

  Thank you

  GrHide, I recommend you first execute this application to diagnose your printer and its software, this can even solve small problems that lead to these errors:

  http://goo.GL/u3jDE

  Also, I recommend uninstalling the printer from the computer entirely after removing the USB cord (if one is used). This would include programs and features, the Manager of peripherals and devices and printers. Restart your computer after you finish and follow the link below to reinstall the printer software:

  http://goo.GL/X1HXm

  Let me know if it helps!

• My hard drive is no longer present in the workstation

  I have a Western Digital 1 TB (external) hard.
  I use it 99.9% of the time on my Windows 7 64 bit computer to store photos and videos and backup important files.

  It was working fine until I plugged on a MACINTRASH to back up the files on this computer.
  It was a simple copy and paste from the MACINTRASH on the external HARD drive.

  After you copy the files of the MACINTRASH, I plugged it in my PC.

  My PC does not recognize my external HARD drive. I unplugged the power supply plugged in. Even with the USB cable. Restarted. Then would not restart my computer and windows is auto auto repair. Nothing.

  I have EVERYTHING unplugged and left like that for about 30 minutes. I have EVERYTHING plugged into my computer and turned on.

  Windows booted up fine. I plugged the external HARD disk and windows had this little icon telling me it was installing drivers. I was pleased to think that he would finally recognize my external HARD drive.

  Of course, he did not. The HARD drive does not appear in my computer. It appears in Device Manager, and disk management.

  Device Manager

  • Under disk drives it only lists as "WD".
  • My other discs it has a nice long name as "WD 7500AAK external USB device"
  • Under properties, it tells me cannot find the Volume information for the disk. (The first time I did before the reboot, he said that there are 0 MB of space on it).
  • She claims that the device is working properly

  Disk management

  • As a first step, it says that I must initialize my disc.
  • Now it is not even more appear.

  I don't know what to do anymore. I had this HARD long enough that I don't know that it's no longer under warranty. I've lost as many files. Please help if you can.

  My MAC does not recognize the hard drive either.

  I wish there was more to the story... but there isn't.

  Unfortunately - if * no. * computer to recognize the drive - it is UNLIKELY he has nothing to do with the PC.  If there is NO possibility of try you the drive on another machine (other that the OS X based PC and Windows PC you mentioned so far) - Please do.

  It could be the drive interface (area around the disc) and not the drive itself.  When you turn it on, do you mean this spin up and spin then just or are there other sounds one minute + after that it starts (except maybe it turns down to sleep)?

  If it's the box and not the reader, although it might cancel any guarantee you, culd you remove the disc and try it in another box / with an adapter or actually connected directly to (a single computer).  To you on that one - depends on if the data are the only (no backup) copy and your need OR if data is stored elsewhere (saved), and you should really just a scratch disk (and the drive is under warranty and easy to get replaced.)

  Don't forget: a backup deducted that you have at least two copies of data in different physical locations.  An archive is nothing more that a single copy of the data stored on reliable long-term media; However, it is just a copy and if it is lost, chances are that it is for the data.

• After the FF35 'Check your plugins' is no longer present my plugins or their statutes

  After upgrading to FF35 when first invited to upgrade to 'Check your plugins' will no longer display my plugins or their status.

  If I re - install FF34 'Check your plugins' works as expected. Re-upgrade to FF35 translates to 'Check your plugins' no longer works again

  Any ideas how to fix?

  'Check your plugins' is now working this morning, as planned in the FF35

• Rocket is no longer present on the desktop

  Hello

  I use Ark Linux 2008.1 with KDE 3.5.9. When I first bought this rocket, I bought it for Linux support. It worked quite well with the Auto-Detect USB Mode. However, it displays more than on my desktop; in fact, the "rocket" doesn't seem to know that it is connected to a computer. Fresh, it allows me to run as if it was not connected to the computer. I tried by him plugging MSC mode and MTP mode (I understand that MSC is recommended for Linux?). In addition, it appears on the desktop or in my file/etc/fstab. Moreover, when I do a dmesg from a terminal, it does not seem to show a connected player, that I find it strange because every MP3 player that I have connected to any Linux distribution is always presented as a flash flash drive or MP3 player.

  I recently discovered on the new 1.01.15 firmware and I would like to be able to upgrade because I'm a BIG fan of Ogg Vorbis and I already ripped all my CDs to Ogg Vorbis format, but I can't do that unless I can get it to recognize that it is connected to the computer.

  I did some tests on my computer and discovered that it was not load the USB drivers. To manually do a ' modprobe echi_hcd & modprobe uhci_hcd' solved the problem.

• HP SimplePass fingerprint icon is no longer present on Web sites

  I recently bought a HP Pavilion dm4t with the Simple collar of HP finger print scanner. Usually when I open a Web site that requires login information, an icon appears, letting me know that I can add login information on this particular website to online HP SimplePass accounts and save it, so that the next time I'm on this site, I can scan just my fingerprints and it automatically opens a session myself. But has only the icon that appears and I have no idea how make it reappear. I try my fingerprint scan when I'm on one of the site I have recorded on accounts online, she accepts my fingerprints and takes me just for the HP SimplePass program menu. Nobody knows what could happen? I try to look on the www.egistec.com site, but who provided no support. I have the 6.5.5.18 Standard version. Thanks in advance!

  Details: it works with Internet Explorer, but is no longer works with Mozilla Firefox. I have the 3.6.8 of Firefox version.

  Check if the HP Simplepass Plugin disable in Firefox? or you can try and run an import from Internet Explorer and check...

• Make a right click is no longer present Print as an option in Windows 7

  The option 'Print' is no longer displayed when I right click on a file (or a group of files) in Explorer mode.
  I can only print a file by opening it in the application and printing from there.
  Even if I right click and select "send to"-there is no printer option.
  It started when I upgraded from Windows XP to Windows7

  I had the same problem with PDFs, then realized, I tried to print from a zip file.

  Once I extracted the pdf files in the zip file, I was able to right click on the selection of any and printing.

• The location of the link is no longer present in the links Panel

  I used to be able to move my mouse over the name of the file in the links Panel and a little pop up would come with the location of the image. It seems that it works, which is frustrating, because it would give me a description longer where was the link. Which shows the link information in the Panel is too few characters to really find in my server. Any ideas why it does not work? I have CC Indesign on Mac 10.10.4 2015.

  It works for me with the same configuration.

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• Illustrator CS4 is no longer present in preview fonts in the character palette after upgrade to Yosemite... Help, please

  Illustrator CS4 is no longer previews of fonts in the character palette after upgrade to Yosemite

  Help, please... Thank you
  

  Got a solution guys. The new transparency is the problem. Go to System Preferences > accessibility, and select reduce transparency. It should work.

  

• Content Viewer Adobe is no longer present in preview on ipad. Help?

  I used the dps to indesign from adobe to create applications and have used the preview of the folio constructor function, but the ipad is no longer supported. When I select a snippet, it will give me only Office option, it's as if it was no recogizing the iPad. I tried two folios I saw in those spent as well as new. I tried to reinstall the adobe content viewer, but the result is the same. Yes, I have the app open on my ipad when I try this. I'm logged into indesign and content with my id Viewer cloud creatives.

  The problem is known and discussed ad nauseam. See the ad at the top of the DPS forum.

• RAID is no longer present in the storage "about this mac".

  After upgrading to Sierra my SoftRAID(4) drive does not appear in the about this mac storage section. I asked soft raid and their answer is that it's an apple problem

  If you haven't already done so, disconnect the SoftRAID(4) drive and stop your Mac. While the Mac is turned off, connect the player SoftRAID(4). Then restart your Mac. See if it appears in disk utility.