led flashing amber, but everything seems ok

I created my Time Capsule as instructed. Everything seems fine. I can connect to the internet through it, and it is even made a Time Machine backup at this time.

However, the light continues to blink which should mean a connection problem.

But me seems to have no problem connecting. So do I just ignore it?

Simply find the reason... in the airport utility, open the summary page of the time Capsule by clicking on its icon.

I managed to copy, at this point, a complete list of the issues... on a single device.

Do something...

Click on each error... a recommended fix will be available for you.

For example, your problem could be as simple as the firmware update. Or it could be double NAT... or it may be a bad one as above... the drive is bad.

Every problem has one solution... others, you can just ignore... for example, I wanted to use the default password... It creates an error... I ignore this error then it goes green.

If you can't understand or fix the error, send us the screenshot showing the error/s and we can help you.

Tags: Wireless

Similar Questions

  • Tecra S2 - power and battery LED flashes - no start

    G ' Day at all.

    I have a TECRA S2 under XP SP3.
    Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

    I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

    Tried several times with the battery inside and out with the same results.
    I have stabilize power before removing or installing battery.

    Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
    See you soon
    kb3500

    > Everything was going well until I went to a place of friends with her and plugged to the power
    Did you use the right adapter?

    To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
    the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

  • Power supply question - amber LED flashing - Dimension E520

    So, I'm working on the dust removal and re - install windows on a machine. I've done dusting, but now I have problems with a LED flashes orange. The system will not top all - fuel without fans or beeps.

    After looking through some posts for ideas, I think it is a bad power supply or a problem with the heat sink.

    I think power because this seems to be a common problem. How can I test the existing? Is there a way to fire unless it is connected to the motherboard?

    The reason why I am wary of the heatsink is that I removed it when I was doing the dusting. I had the intention of fire tonight and get a new thermal paste in the coming days. Since then, I have read that this could be a recipe for frying the total CPU and I wonder if the machine is not pulled up like a check for free preservation any.

    It detects if I removed the heatsink? If it's happening, it will automatically detect when the new thermal paste is in there? Or is there a reset procedure any?

    Any help would be great. Thank you!

    As a side note, the design of this box is poor. I can't find some way to dust effectively the heatsink without removing it from the central unit. Supply openings do not match, so you cannot blow a good flow of air through the box.

    chelseasounder

    A flashing orange switch LED means that the computer is under voltage, but a power problem internal may exist.

    This may indicate a bad diet

    Are the Diagnostic LEDs on the front panel lite?

    The diagnosis Codes are HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

    Have you checked that all the cables to the motherboard and the disks are properly connected, by disconnecting and then reconnecting them?

    Bev.

  • When I connect my hotmail account, I can't open any folder, the Inbox, the new message,... everything seems normal, but when I click on something, it isn't responding.and it doesn't see the error.it works very well in internet explore.

    When I connect my hotmail account, I can't open any folder, the Inbox, the new message...
    everything seems normal, but when I click on something, it isn't responding.it works very well in internet explore.

    I think the next thing to test would that interfere with Add-ons. Disables the Firefox Add-on - Add-ons that only list compatibility with Firefox 5, but some add-ons could cause problems.

    To test, the simplest method is to restart Firefox Safe mode.

    First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

    Then, try help > restart with disabled modules > continue in Mode safe (do not check the boxes). This article gives more information on the options and features of Safe Mode: Safe Mode.

    What is fix? If so, you may have to disable some add-ons.

  • I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine.

    I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine. To explain in more depth. As the computer boots the apple logo flashes off the coast and then turn it back on and finishes loading. It doesn't seem to be any questions I want to just make sure because I just bought this mac.

    It is booting normal up -.

  • I restored my computer after a hard disk failure. Everything seems to work normally, but I can't find one of 'My Documents' and a few other folders are also lost.

    I sat at my computer as he slept. When I wiggled the mouse, I got a notification of "hard drive failure. I restarted my computer, the windows Defender attempted to fix it, but to no avail. I went to the control panel and went to restore. to restart the computer, everything seemed normal, but all my documents are now lost, and a few files from my office.

    Hello

    If you have had a hard drive failure a system restore does not resolve that

    and windows Defender does not attempt to fix anything

    It is used to remove spyware

    read this information on the link below because I think you may be infected by the Malware

    read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

    Read article 17

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

    also follow the correct deletion for that malware, if it applies to you

  • I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

    I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

    Acrobat 9 (and 8, of course) is not compatible with your operating system.

  • Time machine is flashing orange, but I'm online and it seems to be backup.

    No idea why my TIme Machine is flashing orange, but I am online and it's back up? Utility AirPort RAN. Green light for the internet and the sign of caution for airport Time Capsule. It says device not found and to make sure that it is still in the range. But I am online and support up to it currently.

    Any thoughts?

    The TC will blink due to the firmware update available...

    Please open your airport utility... Click the icon of the TC and click Update.

    OR

    Click on ignore the update and sticking with the current firmware.

  • IM update ios 9.2, in that the problem is the alrts led flash does not work?

    How about the alerts led to the iphone flash 5? IM updade ios 9.2 trow wifi. Led flash alerts do not work pls help...

    Hi Armsloy91978,

    Looks like you were the LED Flash option for enabled alerts until you updated, but it doesn't seem to work now. I would check that it is always enabled everything first:

    Turn on the Flash LED for alerts. Go to settings > general > accessibility > Flash LED for alerts.

    From: LED Flash for alerts - iPhone

    If it is checked, then turn it off and leave the settings application and any other application you get Notifications. You can also quit all applications running if you don't know you have them all just to make sure:

    Force an app to close the iOS

    1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
    2. slide to the left to find the application you want to close.
    3. push upward on the overview of the application to close.

    When you have done that reboot the device and test again the question:

    iOS: switch off and on (restart) and reset

    Thank you for using communities of Apple Support, let us know how it goes!

  • Portege R100 stoped working - the power LED flashes error codes

    I have a R100 that has suddenly stopped working.
    The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.

    That - what it means, and where can I get a list of all codes error?

    I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.

    I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?

    Thanks in advance.

    Hello

    I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.

    In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
    Here it s only a user to user forum and I have never seen anyone from Toshiba again.

    Anyway, here you can search for the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good luck!

  • Satellite L40 - 15 G - LED flashes

    Hello, I have this problem, the toshiba satellite L40 - 15G, junt does not illuminate.

    I already remove it from memory and try the power up, nothing.

    I already measured AC adapter / DC, 19v is ok.

    pressing the power button with battery on adaptor taken 30 seconds and nothing.

    The only thing appens, led light, the power light green and orange battery light, appear, and the battery orange flashing with green led power light.

    I mean, seers green rest power one and the battery led flashes, I unplug the AC adapter, e reconnect and the 2 green led watch on and orange, in a few seconds, stars blinking the led battery led (orange) and rest like this and nothing of power up... help please.

    I already try universal adapter and nothing, in addition to this question... really helps.

    And nothing moves fans nothing, only the led lights.

    Can someone help, please.

    Greetings to you all

    Also on my side i have the power to change, and the back side of the Commission, have nothe pass as the power switch, if a press led ligh e stops, I'm talking about, I have everything ready dissamble boad ok, on my hand, I found this switches... what he for?

    And some one take the battery CMOS, in frist place I guess is not a problem, only the Don t of the bios, save the changes I did, plase can one help everything, everything...

    Find the testicles or, thank you!

    I can tell you with certainty what s wrong with your laptop, but I guess that its a serious problem of motherboard.
    Perhaps the electronic power supply on the motherboard is affected.

    Fact is that this isn't the battery problem. Why? Because the laptop should work without the battery, but comes to connect to the network.

    You said that the adapter is OK. Well, it means that the battery and AC adapter isn't the troublemaker you said that memory was also tested.
    So this isn't memory problem and, therefore, I think, it could be the related problem of motherboard.

  • Re: Satellite L750 does not turn on - LED flashes

    Hi guys,.

    Can someone help me please!
    I just bought a laptop Toshiba Satellite L750 last week and it won't turn :(

    The wing forward system indicator is flashing but I'm not sure wat it is: P
    Nûby - I know, but its all new to me.

    Also my lappy does not turn and stop automatically last night in the middle of using it.

    The fan seems to be surging so:(meh son seul nouveau... s'il vous plaît aider!!!)
    Karma

    Hello

    If the LED flashes then a serious hardware problem has been detected on the motherboard.
    I think that the guarantee must be valid because L750 model isn't very old so don t time in bulk and get in touch with the Toshiba ASP in your country.
    Guys should help you for free if the warranty is valid.

    For me it doesn't look like a main part (motherboard) need a replacement.

  • my power green LED flashes and the laptop does not start

    Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

    My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

    ankurgupta53,

    It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

  • Firefox complains about the outdated flash plugin, but I'm on channel of the ESR adobe flash and I the last ESR rev.

    It seems to me that firefox is not aware of the ESR of adobe flash channel.
    I'm on the last ESR flash rev but firefox guard complain about a dangerous obsolete flash drive.

    Mozilla is aware of the current Flash Player 13.0.0. 302 ESR.

    June 30, 2015: https://addons.mozilla.org/firefox/blocked/p928
    Flash Player Plugin 13.0.0.269 to 13.0.0. 295

    Mozilla adds version of Plugins and Extensions to the block list when they are serious concerns of security, stability and malware. https://addons.Mozilla.org/Firefox/blocked/

    https://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
    https://www.Adobe.com/products/flashplayer/distribution3.html
    http://www.Adobe.com/software/Flash/about/

    Make sure Firefox is closed/out before you uninstall and install the Flash player plugin based on Windows.

    Note that the current Firefox 31.8.0esr or 31.9.0esr may be security for the old Firefox 31.0 ESR was last updated as 38.1.0 ESR ESR primary now.

    A section to discuss the Plugin check page is at https://support.mozilla.org/en-US/forums/plug-check-page-discussions

    Note the 13.0.0. 302 ESR is actually a recent update of Adobe to fix critical vulnerabilities. The 13.0.0.29 current previous6 is vulnerable.
    https://helpx.Adobe.com/security/products/Flash-Player/apsb15-16.html

  • Can not go on the internet when everything seems to be OK.

    It is a mini Ipad. Was on the internet for a long time, then suddenly will not go on the internet. Everything seems to be correct. The checkbox to the left of the network and internet icon appears to the right of the network, but it will not go on the internet.

    Settings - WiFi - < name of your wifi > - click on the i - if the IP address starts with 169 - then you may restart your router

    Other tips-

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Please see recommended settings of WiFi routers and Apple access points
    4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
    6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
    10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

Maybe you are looking for

  • I have a weird serch on my computer, how do I get rid of him.

    I let someone else use my computer and it took a weird search on my screen. called Whitesmoke I took a picture of him but cannot show you. My computer is really slow and hanging up as well. I tried to reset Firefox by default and that no longer works

  • Satellite P300 - 18 M - AC adapter / CC died

    Cable today melted around the square plug that goes into the laptop.You can see the wires, lately adapter has been buzzing / making insect noises.It is still under warranty. Toshiba will provide a replacement adapter and how much time it will take fo

  • How to enable you WCF?

    I'm new to SCCM 2012 and I am trying to install Configuration Manager so that we can test if this is the right product for our environment.  We must push 3rd party updates to all our networked work stations and WSUS will not allow anything other that

  • When to send the photos they open with paint! How to get rid of PAINT?

    When I try to send pictures by e-mail - that is tying them - they open with the microsoft PAINT program & are too large to see properly. How can I fix this problem (which only comes to happen)? I can't find PAINTING among the list of the programs on

  • How can I create this kind of Application Structure...

    Hi all I have a question on how to structure my App sorry if it is a matter of repeating, I tried searching but didn't come with anything. I want to have my application to start with a single page to view a log in / sign up page, but once the user lo