Satellite A200-195: green screen when connect or disconnect the charger

Similar Questions

• Satellite A200-1AI: big screen when using a digital projector with display 4 x 3

  I have a Toshiba A200 - 1AI with Nvidia Geforce Go 7300 graphics, the laptop has a 1280 x 800 display. When a digital projector from here/more 1024 x 768 is plugged and the option value to display on display devices, changes in laptop to 1024 x 768 and will stretch to fit the screen, the projector is perfect.

  I prefer the laptop to show no deformed with a black bar on each side of the screen. There is an option in the Bios, which suggests that it is possible and indeed when the value of the bios displays this way without distortion, hoever when Vista starts up, it is up to the extended format.

  Is there a way to get around this.
  See you soon
  Nigel

  Hello

  Did you record the settings in the BIOS after changing this display option?
  Please don t forget to do!

  But if you have saved the settings and the display stills change resolution of 1024 x 768 stretched, then you should check the graphics features of nVidia in the control panel of the Vista operating system.

  Go to the NVIDIA Control Panel and check the Advanced view.

  Good luck

• Satellite A500-19U - black screen when connect the charger

  My PC works fine in the windows environment, application, video, mp3 palyer. In the game works well with a battery. When I plug the charger games are starting to give me a black screen or accident line and sfx in the background.

  I try to leave the PC work with the charger without a battery, the game crashes. When I press CTRL + ALT + DELETE then cancel the game recover back for everything in & do it again.

  My maps updated with the latest video driver [Nvidia G210M] and install the latest Toshiba BIOS

  Any solution guys:(heures départ à me déteste:()

  Hey Buddy,

  This occurs only on the games or the windows too?

  Are you running the factory settings or did you do your own installation of Windows?

  Maybe that's a problem with the display driver. You must reinstall the latest driver from the Toshiba page. Don t use the nVidia drivers because they are not pre-tested:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• BAD_POOL_HEADER appears on the blue screen, when connecting iPod to the laptop.

  Original title: when I connect my ipod to my laptop it causes BSOD.
  When I connect my ipod to my laptop I get BSOD immediately.
  I have contacted apple and crossed a complete uninstall of all drivers and apple software and reinstalled the
  The BAD_POOL_HEADER message appears on the blue screen

  Here is a link to my mini dump files https://skydrive.live.com/redir?resid=94CB07B8AE683786! 1528 & authkey =! AKjmzpZFrK-YvWI

  Thank you, I managed to fix it by doing a system restore to last week.

  Thank you very much

• Satellite A200-195 - you try to reset to factory settings

  Hello

  After you have backed up all my data, I'm trying to reset my Toshiba Satellite A200-195 back to factory settings, to try to get some of the performance. Internet search has launched a number of ways to do this, but none do not work for me.

  I tried now button 0/F1/F8 when switching on the PC until I get the beeps. But then, the only options I get are safe mode, safe mode with networking or start Windows normally.

  I pressed the F8 key the time Toshiba screen upwards and got through a number of options, including the repair of the system. However, after selecting that, when the dialog box appears, these are all the options I get

  1 Startup Repair tool
  2 system restore
  3 Windows complete PC Restore
  4 Windows Memory Diagnostic tool
  Command prompt 5
  6 restore the full Windows operating system.

  There is nothing obviously suggests a Toshiba Assistant or mentions the factory settings. I tried the last option, which brings up a dialog box telling me that if the pre-installed files are corrput I can use the recovery disks and just the OK option. After clicking on OK nothing happens. I tried several times, but each time waived forward and pressed the stop down or restart buttons.

  I also tried the first 3 options, but none of them gave me an option to reset the default or the other.

  I have no recovery disks and I saw searched the help files for the system backup, can't find anyway to create them - only standard data file backups.

  I don't have any disks that came with the laptop.

  I am running Windows Vista Home Premium.

  Can anyone suggest anything, that I have not tried yet please? PLEASE?

  Thank you. :)

  Obviously the HDD recovery partition isn t available on the HARD disk and, therefore, you will not be able to perform HARD drive recovery procedure.

  To retrieve the computer laptop back to factory settings, recovery disk should be used.
  If you n t own this disc, try to order the support on this page:
  http://backupmedia.Toshiba.EU/landing.aspx

  But in case the laptop is too old, you will not be able to order this support more.

• Satellite A200-195: TOSHIBA Flash Cards 'black and white cards' does not

  I was wondering if someone can help me.

  Recently, I restarted my Satellite A200-195.

  I found that my flash cards for my function FN hotkey buttons disappeared and are not pop up on the top of the screen more.
  However, I am able to support the other function keys on the keyboard part F1 - F8, one that allows the mouse F9.

  I already uninstalled and installed the added value package, support Flash utility and even tried to update the Bios, but it seems that my Bio is already the latest version.
  After all, that I seem to be able to activate my mouse F9 key, but my other function keys don't work anymore and the flash cards still do not appear like they use to.
  Is this what can I do to get my flash card pop up on screen without having to bring my laptop back to factory default?

  Have you tried to restart Flash cards?
  Start > all programs > Toshiba > utilities > restart Flash cards.

  You can also try is to install the Flash cards support utility if you can find it on the download page of Toshiba.

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite A200 - 26 d display is visible only on the external monitor

  I have a display problem with a Satellite A200 - 26 d

  As I was using the laptop, the screen went black.
  Shut down and restarted the normal red Toshiba logo came but was dark and light to the right of the screen to the left.
  Screen went black new carries on reboot but still no display.

  Connected to an external display system works very well with that and show me in display properties there are 2 screens.

  All ideas

  > Plugged in an external system works very well with that and show me in display properties there are 2 screens.
  What happens if you want to use the FN + F5 key combination?
  Can you pass to the internal display again?

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• How always show left column on the screen, when I scroll to the right of a large spreadsheet

  How always show left column on the screen, when I scroll to the right of a large spreadsheet

  If the left column is a column header, you can check freeze header columns in the table menu.

  

  Better not to use TOO many columns.  Numbers works best with relatively little.

  SG

• My toolbar was at the bottom and is not on the right side of the screen when I turned on the PC. How do come back on the bottom?

  How do you reposisition the toolbar background down

  Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:

  My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?

  You say "toolbar." Do you mean the taskbar?

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
  Ken Blake, Microsoft MVP

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner