LELA 3.0 for WRT54G?

Similar Questions

• Can not downloard firmware for WRT54G V8

  When I go to the support area to download frimware upgrade 8.00.6 What happens as a .bin file. Y at - it something I don't get. How to extract information from a .bin file? I'm used to seeing 'Run' when I'm updating firmware or software. The system wants to "find" an application to open the .bin file. I got lost.

  The firmware for the WRT54G V8 router is .bin. Download the firmware for WRT54G V8 and save it to the desktop. Now open a browser Internet Explorer on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase... Now, click on the Administration tab, then click on the 'Firmware Upgrade' void tab-here, click on 'Browse' and find the .bin firmware file and click on "Upgrade"...

• New software download for WRT54GS

  Hey all. I use a Linksys WRT54GS v 7.2 router model number. Currently it works fine but I have to reformat my hard drive soon and we have lost the CD that we used to install the drivers.

  I was in the downloads section of this site and downloaded the drivers, but it came in a file in .bin format. I tried to run with Daemon Tools, but there was no file cue with him so it didn't work. I tried to make a cue file, and it still does not work. I wanted to test to make sure that it works once I reformatted.

  How can I get this software again? If the .bin file is what I need, how can we get to reinstall what I need?

  Thanks a bunch!

  Well, since nothing else has been changed... Yes just plug into it like you had and go.  However, if this does not work, you will need to configure it from scratch.  You can download the manual from the site of Linksys or go here to start.  This will get your wired connection going.  However, you need to check your computer's wireless.  Now you need for the wireless network adapter drivers that are available from the manufacturer of the computer.

• Spare parts? (power supply for WRT54G)

  Where can I buy a power supply for my wrt54g?

  If you check that the manual is says he uses the power supply 12VDC at 0.5 amps.  You can get these anywhere electonics are sold.

• Need software for WRT54GS

  I need to reinstall my WRT54GS but cannot find the original disk. Is there a place I can d/l the software installation? I can find the firmware updates, but I think more than that, I have to install the router. Thank you.

  Hmmm... interesting.  Just do a "factory reset" on your router and will change the name of user and password by default in your guide of the user, and then you'll be able to connect to the web GUI with 192.168.1.1 again.  After a 'factory reset' you have to reenter your settings, because it sets everything back to default settings.  If you have a cable modem, be sure to clone the MAC address once again, etc, once you have reset your router.

  You should really go to the Linksys support site and download the user guide for the router.  You simply enter your model number and the version number of material (on the router), and you can also download the latest firmware from there.  The user guide has all kinds of information in this document, such as how to do a reset, how to connect, the settings of all them mean, how to upgrade the firmware, etc..

  In General, to upgrade the router, all you have to do is update the firmware.  Your ISP may have additional requirements for a connection, either, but the router is just the upgrade of the firmware, followed of a factory reset.

• Unable to restore the settings for WRT54G v. 2.2

  I have updated the firmware on my WRT54G v 2.2.  By following the instructions in "Guide Me", I have everything first to save the settings, then reset the router by pressing the reset button at the back of the router for 30 seconds.  However, when I tried to restore the settings, navigation and by opening the code.bin file saved on my desktop, I got the error message "invalid image file".  Now, I've lost my router settings, including the name of the network and secure settings.  How to restore settings, or if this is not possible how do I manually set parameters?

  Thank you

  Sam

  Look for this icon:

  

  In the left pane of Network and Sharing Center is a link manage wireless networks. Clicking on it leads to this dialog box:

  Remove the old network and select Add, just follow the wizard to match the settings you have on the wireless router.

  

• Power adapter for the power of the Russia for WRT54GS & WRT310N

  I will travel to Russia this summer... someone knows if one or two of these router can take an adapter for use with different power which would be available in Russia? Thank you

  Any decent adapter available at Radio Shack or another source should work just fine, the demand for electricity is very low for this device and the cube of power the power is running continuous for the modem in so the variations in frequency even should have no effect at all... safe travels!

• Do not find version 7.0 on the website for WRT54G

  Hello

  My WRT 54 G read firmware version V7.00.1).. The sticker on the device can also read Version 7.0.

  However, I can't find this version listed on the Web site. Any ideas?

  Best regards

  Dipinder

  I suggest you do not upgrade the firmware of your router if you do not have problems with your router... If you want to update the firmware so I guess you have to wait and keep control of the linksys for any upgrade Web site...

• Help with EasyLink Advisor for WRT54GS

  OK, when I try to make it appear the EasyLink Advisor to my router it says need administrator privileges, and then under that it says that you must be logged on as a user with administrator privileges to change the configuration of the computer for home networks. The thing is, though, that I'm logged on as administrator. I've never had this message before. I learned about the EasyLink Advisor repeatedly to find the IP address and other things so I can connect my Xbox, iPod Touch wifi and stuff like that. But now it doesn't let me do anything. I used to have Windows Vista on my computer, but then I upgraded to Windows 7 and I think this is the problem because it started to happen after I upgraded. Help!

  Yes easy Link Advisor is not supported on Windows 7.  You don't need it anyway.  Just connect to 192.168.1.1 with empty user name, admin password and check the router itself.

• Internet connection not working not not for WRT54GS

  Hello

  I am a user of Windows XP, and I have the internet service from Verizon Dsl high speed.

  I need to get the internet connection works for my router.

  I tried to put the modem, the router and the computer off, but its not good.

  I also tried using the reset button on the router and its not good also.

  I went on the 192.168.1.1 address and internet connection is on the Automatic Configuration.

  I tried to release and renew the status, but it is not good.

  Is there anyway that I can fix this?

  Thank you.

  -jd

  As is your DSL Internet service provider follow this link to configure the router.

• Please HELP - cannot get online with web access router, create page for WRT54G

  I do something wrong that I cannot receive a confirmation email and can not get a response from someone?

  Impressive... it worked! I tried to access the ip address before but nothing helped. I took a deep breath and read the instructions of your and it is ready now. Thank you. I was struggling with this days!

• Problems with client configuration WRT54GS mode

  Hello

  I have a WRT45GS client mode configuration which connects to a WRT54GS access point, the problem is that when the radio is off it lose its configuration I have to manually repeat the procedure to be customer implemented through site survey.

  Did someone else you have this problem? It is really strange and I need to turn off the radio during the night

  Really thanks

  Just to check, both devices are WRT54GS? You must be referring to access to point to another device, since there is no option of client mode for WRT54GS.

• WRT54GS V5.1 - lost CD

  OK, I'm a resident, the router I have is the WRT54GS V5.1 - and unfortunetly broke the CD in the United Kingdom. My main computer is messed up as it got too hot and I simply ignored him. Now its burnt out and im left stick the router on this laptop.

  This happened last time I had succeeded to save the installer on a USB key, but now I've lost this USB.

  I checked the section "Support / Download" but it does not contain the installation wizard, only the Firmware... but it doesn't have the Installation Wizard of the V3... which is kinda stupid like why would you download the installation just v1/2/3/and wizards not the rest?

  Anywho, can any1 link me / upload one Assistant for WRT54GS V5.1 Installation please. I need to install it so I can get up my XBL I pay so that you know! Ive reset my router so its just coming up as "linksys" and is not protected so don't know who Leech off my internet as we speak! -BTW im connected to the internet via a cable connection, I need the router must be installed for the brothers can use internet on their Pc.

  NVM, I managed to go to 192.168.1.1 and basically put in 1 place out there with a firmware updated and secure...

  Although I can't get the internet to work on the second computer... so yes thanks for the help, guess that ima try n find a solution for this by myself... again.

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.

• WRT54G keeps restarting with Windows 7

  Hi guys, I really need help here, I use a laptop with Win 7 Home Premium + WRT54G ver 7. Whenever I connect my laptop via LAN or wireless network, the NVA WRT54G 7 keeps restarting that it self. I try to use another laptop with win xp and it works perfectly well,

  How can I fix? can someone help me?

  Sorry for my bad English, because this isn't my mother tongue,

  Follow this link to download the firmware for WRT54G ver.7.