Lenovo-g50-30 does not connect to the wifi at home.

Hello everyone, I just signed up a solution.

I got a g50-30 lenovo with windows 8.1 about three weeks ago and I got a wireless problem since then. The laptop connects to my router (Thomson tg582n) but then it shows the limited connection alert. I can browse for about 5 minutes, but just after im unable to do, while the rest of the Smartphones and tablets can connect to it. This problem started about five weeks ago and old macbook, I had, but there does appear to be a fix. In College, I am able to connect to networks without problem wireless and Ethernet works fine as well. I tried everything, reboot and restore the router, change channels and encryption for security, created at the same IP address, I've disabled, restored and turned on windows firewall, released and renewed the IP, DNS blank. Adapter WiFi disabled and enabled, uninstalled the drivers and installed them back again. I did seriously while that I found without success, so I come to you in desperation. It would be the world if you could help. Thank you!

Thank you VERY MUCH FOR the HELP (note the sarcasm)

Anyway guys, I found a very good solution which put an end to my connectivity problems. Go to your wiifi configuration and properties and choose to do a custom, DNS server and then type as main Server 8.8.8.8 and 8.8.4.4 as secondary (these are the free Google DNS servers) and all your problems will disappear. If anything, do not hesitate to ask.

Tags: Lenovo Notebooks

Similar Questions

  • Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

    So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

    Hi ZachRhodes3,

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    5 steps: how to set up your network wireless home

    For reference:

    How can I troubleshoot network card?

    Wireless network card: frequently asked questions

  • PlayBook of blackBerry Smartphones does not connect to the WiFi PRIV "hot spot"

    BlackBerry PB does not connect to the WiFi PRIV "hot spot". Implements immediately with an android tablet based - Hudl of Tesco UK - but the PB comes not to connect to the private. Reading through various bulletins and cannot find anything obvious that I missed. PB connects to the other wifi fine.

    Sorted. And so simple. Just changed PRIVATE WiFi "hot spot" to 5 GHz. thanks to Bruce using BlackBerry.

  • iPad does not connect to the Wifi on the range 192.168.0. *.

    I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

    I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

    After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

    My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

    Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

    Is there a future fix for this?

    Re: iPad wifi suddenly does not save

    Change the range on the router you want to connect to.

  • HP Deskjet 3055 A does not connect to the WIFI with security

    I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

    First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

    My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

    I restarted my router and reset the printers wireless network using its integrated control panel.

    In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

    I tried both WPA Personal and WPA2 Personal, both with the same effect.

    For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

    After installing printers web interface WIFI, the problem is always the same and it does not connect.

    HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

    Concerning

    Ian

    After playing well, I managed to find a solution for this!

    For all users who are unable to find a solution by using the other methods, here's what to do.

    Change your local network to open the safe but note your WIFI settings for your default installation.

    Connect the printer to the open network the HP software (via USB cable)

    Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

    Click on 'Network', then click 'Advanced' on the left.

    Enter the network settings as they need to be secured.

    Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

    Turn on your wireless security, on your router and then the printer should connect!

    I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

    HP - feel free to thank me in this post!

  • Mac does not connect to the wifi and keeps crashing

    My macbook pro (end 2013) will not connect to my wifi although each device only. Now he has slow veey hone and continues on crashing, doing simple things like a PDF of scrolling. It all started a week or two after the upgrade to OSX El Capitan

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • M177fw does not connect if the WiFi extender is activated

    Main WiFi router's CISCO E4200

    WiFi Extender is TP-LINK TL-WPA4220

    Printer is HP LaserJet MFP M177fw Pro

    Date of the firmware: 20130823

    Install Smart SW Version: 20/06/2013 1.0.13171.352

    Printer is in the same room as the CISCO router.  Extender is located in another part of the House.  Extension signal is low near the printer.  The Extender is turned off, the printer immediately connects to the WiFI network.  When the extension is enabled, the printer tries to connect several times and fails.  All computer iPhone, iPad, laptop and smart TV in room normally works with the CISCO and extension under voltage, but the HP printer does not work.  Is there something I can do to fix this?

    This has always been a problem with 2 AP make sure the router and the Extender are on different channels, like 1 & 6, 6 & 11, 1 & 11.   Where is the printer, set this AP to channel 1.  Try now.

  • My mac does not connect to the wifi unless I turn on the iphone

    My home wifi works great though I have my wifi enabled on my iPhone. But if I have the wifi turned on on my phone, free wifi does not work half the time, unless I wake up my iPhone. I do not use a personal hotspot, or any other type of phone wifi-centric. Just a normal modem and apple airport extreme router.

    My mac is a model of iMac end 2015 running El Capitan (later). Phone is running last sof

    Any ideas how to solve this problem?

    What exactly do you mean by "does not work? What is going on?

  • IPhone does not connect to the WIFI in the House when not near router

    This is a recent as problem it used to work fine.

    My iphone connects to the WIFI in my house when I'm in the same room as the router but won't connect to nowhere elsewhere in the House.

    Any other apple device I have works fine, so this would suggest that there is a problem with the phone?

    Is it possible to fix this?

    Thank you

    If your iPhone is in a case, first thing I would try is to remove the case and see if that fixes it.  Other that that, I can't imagine any easy fixes.  This article may help:

    Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

    My next step would be to take it to a nearby Apple store and see if they can diagnose and help you.

  • M70: WiFi adapter does not connect to the wifi Lan

    Hello
    I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
    "Sell another application is controlling the wireless card."

    I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

    In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

    Any help will be appreciated.

    Hello

    Have you used a tool of connectivity like Atheros WLan client utility?
    On WEP:
    PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

    Please also see this page:
    http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

    Good bye

  • DeskJet 2540 does not connect when the WiFi is enabled

    When online the printer will print not wireless, when the line of the printer print wireless help... aaaaahhhhhh third one is now...

    Hi paulthechef1,

    Using a connection myfi could absolutely cause these issues.  MyFi isn't a supported type of connection, and its functionality with printers is not a guaranteed connection.  I recommend you to connect to a router or a USB cable.

    Please let me know if you have any other questions.  Thanks for posting on the HP Forums.

  • iPad is not connected to the wifi at home

    Hello

    The iPad is the device at home I have a problem with. And it's the only device that is still home. It loses the connection with the wifii after awhile in the screen lock, and sometimes while using it. I was disconnect and reconnect to wifi to solve the problem. I'm now trying the button of lease renew but I know not why this happens not on my iPhone and my MacBook Pro.

    Thanks for all the ideas.

    Faurie

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Q10 Q10 blackBerry does not connect to my WiFi at home

    My new Q10 see my protected WiFi password but authentication times out when I try to connect.  As a sidebar, I'm alse unable to connect my wireless HP printer and have been told it is because of Mac settings to the printer.  My printer and telephone connection problems may be related.  My priority is to get my new BB to connect to my WiFi.  I have connected successfully to a Telus passwork protected WiFi is probably not the phone.

    Thank you

    I talked to the former, IT supports a colleague (I worked for SW Co.) and he confirmed that all the settings are OK. Router was 8 years old. Went and bought DLINK updated now, printer and Q10 connect.

  • Z580 does not connect to the Internet at the beginning

    I recently bought a laptop Lenovo Z580, I'm running Windows 7 on it, and the problem it is that it does not connect to the Internet initially once I start my computer, although I will be connected to the LAN. When I try to diagnose the problem, I get the error message below.

    "Your computer seems to be configured correctly, but the device or resource (DNS server) does not.

    If I run the diagnostic tool for a couple of times, the problem is resolved automatically (and not by the Diagnostic tool). This problem does not occur with my friends that connect to the same network.

    I had a similar problem and it was mcafee, I now run kaspersky and the internet is instant.

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

Maybe you are looking for