Lenovo G560 2nd RAM slot does not recognize.

Similar Questions

• Pavilion g6-2333el: g6-2333 el Pavilion RAM slot does not

  Hi, I recently decided to update RAM of my Paviliion g6-2333el by adding a second 4 GB of RAM.

  I inserted the new RAM in the RAM secondary housing, but the PC seemed unable to find. Fearing that I might you bought a RAM that was not compatible with my laptop, I tried to delete the original RAM and put another in his place: the new RAM has been correctly identified.

  Seeing that the new RAM was indeed compatible, I tried to insert the old one in secondary housing, and the result was the same: the RAM was not considered by the PC.

  I noticed the following about this secondary property of RAM:

  (1) the RAM seems to be inserted less deeply than in the other slot

  (2) the RAM is very easily put out of position when he is in this niche (as in, just a little touch will make it fall out of the connector)

  (3) in contrast with the other location, when the metal arms that hold the RAM in place are released RAM no "eject" on its own

  Someone has an idea what could be the problem? The connector is broken or it's just that for some reason any RAM can't stay in place?

  Try blowing the slot with compressed air. Insert the module at a 45 degree angle and don't hesitate to push a little once you are sure that the notch is aligned with the tab into the slot...

• Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)

  My hard drive doesn't have the other day (western digital 320g).  He left me stranded, I installed a new HD, installed windows 7 pro costs.  Everything seems to work except for my linksys PCI slot wireless network card.  In my control panel, I have a yellow on my network controller in the properties of the material.

  All ideas, it won't let me add a driver?

  I installed windows with the card in the slot, which shouldn't matter should it?

  Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys

  Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.

  Here a link to Ralink is where you will find all the Ralink drivers.

  Here is a link where the drivers for your card.

  You will be asked to enter your name and e-mail address to access the doe to download these drivers.

  If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.

• HP EliteBook 8740w p/n VB744AV: Base model with only 2 RAM slots does not level up to 8 GB of RAM, 6 GB only?

  So I discovered that my laptop is a version of the basic model of the Elitebook 8740w so I'm missing 2 RAM slots. However, I went to upgrade my RAM from 4 GB to 8 GB the other day, and after ensuring all the RAM was split and firmly fixed my laptop would only flicker the lights indicating that my ports were dirty, RAM was split in correctly or I ordered the bad RAM sticks (which I didn't, I double checked). So I have of the 4 GB split into the slot of the RAM under the keyboard and replace one of the original 2 GB sticks in the other RAM more accessible location at the bottom of the computer. Laptop started fine. I'll try the RAM slot again later tonight when I get home from work, but if anyone has any experience with this issue, I'd love to hear corrections or explanations on what I can do wrong.

  I also want to note that I checked the specifications of the computer and it says that it should support the 8 GB of RAM or more. However I do not know if this is a generalization of the product since it usually comes with 4 vs slots of RAM upgrade only the 2 I have in my laptop.

  Quad Core versions have 4 RAM slots and Dual Core 2 slots. Max 32 gig and 16 gig respectively. Try the reslotting and let us know how it goes. 8 concerts must be OK, assuming that compatible. If the problem persists, please provide the manufacturer for both modules reference numbers.

• DVD-RAM UJ862AS does not recognize discs-r on Satellite U400

  For some reason any my DVD player wil no longer recognizes discs - R.
  I have a RUG * has DVD-RAM UJ862AS by car.

  Clues?

  Hello

  Try to clean the laser lens with cotton and alcohol tip.
  In my case it worked also try different drive R from different manufacturers. I use the TDK R CDs and DVDs and hand never no trouble.

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• Lenovo B50-50 does not recognize my external hard drive

  I recently bought a laptop Lenovo B50-50 and it does not recognize my external hard drive. It's a WD elements with USB 3.0 storage device. I tried a few of the fixes recommended on other forums, but none of them work. The hard drive comes up is the list in Device Manager, and all my usb drivers are up to date. The hard drive works perfectly on other devices. Other work of readers of fine nib. Normally when the hard drive connected to the aa one device in flashing lights. This does not happen when I connect it to my laptop.

  Any help much appreciated.

  Make sure you use your laptop, 3 USB ports, not then a USB 2 port to see if one will work. If it does not power up to contact Western Digital for support.

  Good luck.

  CB

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• PC card slot does not have 32-bit cardbus PC card

  Hey,.

  My pc card slot does not recognize my pc card. It is a 32 - bit cardbus pc card card and the card slot supports 32-bit cards, so it must work! I downloaded the new drivers, but it still does not work. Anyone know what to do now?

  Thank you very much

  Symen

  I think it would be very interesting to know what laptop you have exactly and if PC card really supports the 32-bit cards?  :|

  Anyway. some BIOS on different laptops offer option and unique settings for the PC card slot. Have you checked the BIOS?

  Do this!

• Tecra 8200 does not recognize the RAM in Slot B

  Since a few days my Tecra does not recognize the RAM Module in Slot B. Before everything was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes slower, the last days, and then I saw that I have now only 256 MB of RAM. I have change the slot Modules A to B. I checked also the two modules of RAM with MEMCheck. Both are ok! Just at the moment where I put a RAM for Slot B and none in slot A my Tecra won't start! If I insert the two module my Tecra boots but with just 256 MB of RAM.

  Is there another solution then buying a new laptop? Is my Mainbord damaged?

  I was so contently with my Tecra ;-) so far

  The slot B is probably defective. Only solution for me is to buy compatible 512 MB module and use it in A slot. According to specification for laptop, your device can handle with max 512 MB of RAM.

• Satellite L30-105 does not recognize the 1 GB of additional RAM

  Hi there I hope someone can help me

  I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
  and it's terribly slow with vista, not to mention programs.
  The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

  However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

  The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

  Are limited to only some of the Satellite of RAM?
  The old subjects indicate if kingston does not work try corsair.
  Other topics suggested to change slots
  Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

  Can anyone help? everyone knows about similar problems?

  I will not buy any more RAM to try different brands for the same issue to occur

  Hello

  The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

  > Why the RAM 1 GB module cannot be recognized?
  Perhaps the two modules are not compatible with each other
  I would recommend using two identical modules of the same manufacturing
  I use Kingston modules, they are ok for me

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• Carpet * a DVD-RAM UJ - 841S does not recognize movie DVD on Satellite Pro A100

  I have a portable Satellite Pro A100-PSAAPE.

  Initially the played DVD movies very well, but now it does not recognize DVD movie at all.

  The drive itself is recognized and works very well with recovery DVD and CD-ROM.

  Phone support: they had me reinstall the driver and boot from the recovery DVD. This does not solve the problem. They then said to do a system restore. Tried, but it seems that the previous restorations of system are in themselves unsuccessful and the restoration of the system that has worked has not solved the problem.

  MediaPlayer and Intervideo WinDVD seem to work well, but do not find the DVD in the drive.

  They advise now reinstall me to factory setting, but don't want to build the laptop up to scratch etc, so I'm hoping that there may always be a solution.

  Can anyone help please?

  Thank you

  Best wishes

  idob

  Hello

  You understand that you must specify if it is a hardware or software problem.
  Unfortunately, you can find this secret only using recovery DVD (CD).
  Toshiba recovery installation will define the laptop back to the factory settings. In this case you may find whether or not the CD/DVD device is defective.

  If the player will not play the DVD after the reinstallation of the operating system, then chances are that it is a CD/DVD drive error.

  Good bye

• PC does not recognize the third HD

  I would like to add a third internal HD to my PC via a SATA connector, but my PC is so far not recognize my third drive after connection.

  Data sheet:

  M7664X http://support.hp.com/us-en/document/c00771737

  MB: A8M2N-(Bios 3.10) http://support.hp.com/us-en/document/c00783678

  Win 7 Pro

  GPU and upgraded PS

  Current readers and connections;

  C: SATA HD with OS and only for programs

  D: optical drive SATA

  E: SATA HD for storage of all the

  *: Original optical drive connected with IDE cable but is no longer recognized after that I recently installed Blu Ray compatible optical drive.

  New HD 2 TB correctly connected to the power supply and cables SATA MB but when I start the PC, Windows does not recognize the new HD connected on the fourth slot SATA.

  Is there something I should do under PC Set UP to initialize the new HD that I jumped?

  Refusing to make waves is not an indicator of a life lived well. Refusing to make waves is the State that precedes the drowning. -Author Paul Coughlin

  If you are not sure of any stage, confused, DO NOT make changes.

  How to prepare a hard disk

  Start, Control Panel, administrative tools, then:

  • Click here to open the computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • In the left pane, under storage, click Disk Management.

  • OK, lets check in disk management. Your boot drive will display a Disk0. Stay away from that.

    Your 2nd hard drive will be displayed as Disk1.     Stay away from that.

    3rd (new) hard disk should appear as Disk2.      If it is this that "see you", then continue.

  • Click on a region not allocated on your "new" hard disk and then click New Simple Volume.
  • In the new Volume Simple Wizard, click Next.
  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.
  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.
  • In the Formater Partition dialog box, do one of the following:
  • • If you don't want to format the volume right now, click on do not format this volume and then click Next.
    • To format the volume with the default settings, click Next.
  • Review your choices and then click Finish.

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?