Similar Questions

• Fails to start repair, system restore breaks down

  I have Vista Home Premium. Last week he forced updates to install, and since my laptop does not start.

  Notice - can be found here: http://social.answers.microsoft.com/Forums/de-CH/vistahardware/thread/73f7be44-0722-42dc-8dd4-188697f6c64a did NOT work.

  I tried to start safe mode and do a system restore - fails. stop at the line "crcdsk".

  The Bootable repair disk does not work - I already ran Startup Repair from the Vista preinstalled on my laptop, and he arrived at the same point.

  I ran chkdsk c: f, who found mirror TF (MTF) errors and fixed them. However, he cannot access d: which is where everything is written in (I have a HD 2 part apparently).

  I managed to 'pull' some of my files on a linux system, so I hope I haven't lost everything. However...

  What should I do now?

  I don't have a Vista CD with my laptop Sony Vaio, as it came pre-installed.

  D: is normally the recovery disk to put it back to factory settings.

  Check with Sony on this subject for your model.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  The startup Neosmart Repairdisk is what we usually recommend. but you say you have tried a Bootable ERD without result

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's a little more information of data recovery for you:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Lenovo driver y410p breaks down

  I have problems with the pilot on my y410p crashing after upgrade to the latest driver nvidia geforce experience... I can't find drivers for stocks came with my laptop because I changed the partition or something. I find the recovery partition but I don't want to restore and losing all my work of movies, games, etc.

  Can anyone tell me where I can get lenovo certified drivers for the 755 m?

  Diwashb wrote:

  I have problems with the pilot on my y410p crashing after upgrade to the latest driver nvidia geforce experience... I can't find drivers for stocks came with my laptop because I changed the partition or something. I find the recovery partition but I don't want to restore and losing all my work of movies, games, etc.

  Can anyone tell me where I can get lenovo certified drivers for the 755 m?

  Should be here.

• Lenovo System Update - update of the catalogue

  What happens with the Lenovo system update? We get an error that the package catalog is updated? We have several models here and its happening on each of them. I can't find anything about this update on any site of Lenovo, and the answer I received assistance was "Sorry." Also, they weren't able to tell me when they think that this will be corrected.

  EDIT: spelling.

  My account manager come back to me. It is said this is resolved now, and I see the same thing.

  If you are able to provide an explainantion as to why he went down it would be appreciated. No communication was available on a Lenovo or forum site. Very dissappointing.

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• If my computer breaks down how am I supposed to get my files that are saved back.

  If my computer breaks down how am I supposed to get my files that are saved back.

  Barjakes

  What operating system are you currently using?
  If you use Windows 7 try from here.
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

• Explorer.exe (I think) breaks down regularly

  Hello

  First, I will begin by saying that I am not entirely sure of the weather or not this is the right category. So, I want to apologize if it is not.

  My problem is that explorer.exe (or at least I think it's explorer.exe) breaks down regularly. It happens when I am opening the files, making things with files (such as copy, rename, Zipper,...), or simply at random intervals. Then the image of the desktop background and the icons on the desktop disappear, leaving me with a purple background. The same happens for all the icons and the clock in the taskbar.

  Usually, it recovers after a few seconds, open records in the process of closing. When it isn't, it can be retrieved manually by running explorer.exe in Task Manager (this is why I suspect task manager).

  Sometimes it seems to get into a loop of crash, constantly crashing, recovering a few seconds later and then crashing again. This can be stopped by killink 'Windows verkenner' task, or translated: 'Windows Explorer' in the Task Manager. From, it still often causes only to crash again then, so then I have to use the cmd to do what I would normally be in the Solution Explorer, or restart my computer hoping that it will work next time.

  While this problem is not very harmful to my computer (or so I think), it's getting very annoying, especially since it ig going more frequently over time.

  I have already disabled the windows updates, because the problem always seems to worsen after updates.

  He has especially much worse after upgrade my computer to windows 8.1 (which was already earlier). He never continued to work for a minute then, and I did a system recovery to restore windows 8.0.

  I had this problem basically since I've had this laptop (which was in September), but I have not found a solution for this. I've done various analyses of viruses and malware, and I'm sure that it is not caused by a virus.

  If anyone knows a fix work for this, so I'd be very happy.

  Thanks in advance.

  ~ Ben

  If Windows 8 comes with the laptop, then you must take the issue by the manufacturer of the laptop.

  There may be a policy for downgrading to Windows 7.

  What you are experiencing with Windows 8 is not typical and I would recommend to take up the issue with the manufacturer of the laptop because it's their responsibility, under warranty, to make sure everything is working properly, including the software.

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• Companion 3.0 Lenovo and Lenovo System Interface Driver/Foundation

  I downloaded the 3.0 companion of the App Store from Microsoft, and install, it asks me to install the "Lenovo System Interface Driver" (Foundation) before.

  I can't find any information on what the pilot is and why it is necessary.

  Can anyone share specific details?

  Thank you.

  
  

• Why am I getting SHAREit ver1.0.38.379 from the download page, but ver2.1.4.0 of the Lenovo system update?

  I would use SHAREit app on my T420(MTM: 4177Q7U) Win7 32 bit PC but not install it again. Then I ran Lenovo System Update to check for updates. He scored a single pack of SHAREit 2.1.4.0. I ignored him.

  Then, I accessed the Lenovo homepage (see link below) and downloaded an application of SHAREit. Installed and found the version ID '1.0.38.379 '.
  http://shop.Lenovo.com/us/en/accessories/software/apps/?menu-ID=lenovo_apps

  I'm a little confused and surprised. Why Lenovo provided different versions of SHAREit since the home page and to download Lenovo system update?
  Where should I get the updated version of official release SHAREit for my Windows PC?

  Thank you!

  You will always find the latest version of SHAREit link below:

  Download SHAREit for Windows, Android, and iOS.

• Windows 7 deployment using PXE to a UEFI + active secure boot Lenovo system.

  Hello world

  I was wondering if it was possible above? I have not yet put a lot of energy this uefi and secure boot thingy - said if just our supporters to change the bios settings to the legacy with secure boot disabled on the pre Windows 8 delivered Lenovo systems.

  System deployment:
  SCCM 2012 SP1 is running on a Windows Server 2008R2

  Concerning

  Anders Jensen

  Win7 can't Secure Boot.

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• Last update to the Version of 5.07.003 Lenovo system update leaves without running.

  The recent update of Lenovo system update does not work on my computer of ThinkCentre M82 on a Windows 7 Pro 64-bit system. The initial screen appears and the program terminates immediately. Center solutions marked Lenovo an error saying that update system had not checked for updates for the last 30 days. I uninstalled the version he and re-installed from the Download Center on Lenovo, but it still does not work. I run it with administrator privileges. I gave permission to run under Windows Firewall. There was an error message saying "Invalid firewall rule" that I don't understand. Before this recent update, update of the Lenovo system always worked perfectly. I think there may be a bug in the program, but I would like to Lenovo views on this problem. Thank you. rwsjr

  Problem solved by MK2117 on 02/07/2015 in advice to remove C:\ProgramData\Lenovo\SystemUpdate\session

  Thank you MK2117!

• After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

  Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

  which means that I am unable to download XP 3 service pack or IE8.

  Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

  Edit: Link fixed.