Lenovo U310 too long POST W10

Similar Questions

• File name too long in Microsoft Excel 2008?

  I have Microsoft Office 2008 for Mac and I'm a big user of Excel.  Often, I receive an error message indicating that the file path that I specify when you create a new file is too long.  I am convinced that earlier versions of Mac OS x did not produce this error, or at least worked better.  I'm 10.11.4, OSX but I suffered with this problem for some time.  I read other reviews, stating that there may be a limit of 259 characters for the file name and path.

  My question: can someone tell me if this path length limitation has been removed or the less liberalised in the latest version of Excel?  Should an upgrade just to get rid of this nasty problem.

  Thank you...

  You can also post the question in the Microsoft Office for Mac 2016 forum: http://answers.microsoft.com/en-us/mac/forum/macoffice2016?auth=1

• Contact book P70 it takes too long to load

  I have lenovo p70 is good phone, but I face a problem since a few days when I opened my contact book it is taking too long to load contacts which is stored in my phone

  Note from the admin; subject edited to better reflect the problem

  
  

• Takes too long to Hibernate when I close the lid - also the noise of random device when starting

  Hello guys.

  Since I wiped the machine, I had these two problems. When I close the lid, he used to go to bed right now, but now I see the light of sleep (and the power button), flash and flash, and then he goes to sleep.

  Upon awakening, he crosses the start of lenovo screen and resumption of the windows, then it asks for a password, before I used to open the lid and he was asking me the password immediately. I know it was going to sleep because I could hear the beep immediately when I closed and opened, but now it takes just too long.

  In addition, every time I have boot into windows or resume in a sleep state windows, I hear the sound of the device, like something being connected input/output. But there's nothing being plugged or back at the time. I can't to Device Manager fast enough to see who it is who is the cause.

  But all the drivers seem to be correct.

  Thanks in advance.

  Sam.

  EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (beep) one then turns left.

  Weird.

  T420 model number: 4180-PR1 with operating system: Windows 7 Pro 64-bit

  Completely wiped the machine and reinstalled everything. No Acronis this time and work all fine.

• MS. error Combat Flight Simulator: invalid, too short, too long or protected player in writing.

  Try to install the version of MS Combat flight simulator 1998 on a Windows 7 system.

  Setup program opens and runs through until you choose an installation path.  It gives the default value:

  C:\Program Files (x 86) \Microsoft Games\Combat Flight Simulator

  It is said that it is a drive not valid, too short, too long or write protected.  Then, he gives an example of what it should be.  And it is exactly the same as above.  What I am doing wrong?

  Hello

  I suggest you to change the installation location of the game and check if that helps.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Too long domain login account.

  Hello.

  My user (Win XP Pro SP3) obtained connection problem (Win Server 2008) DC.

  What user login, it just hang out with white screen.

  She seems too long and perhaps hang. I wait almost 30 min and still load the profile do not.

  Then I connect PC via local admin and delete the security log.

  After you remove the paper, then measurement of domain user login account.

  But it happened again after the restart of the user or logoff.

  Why it happened? Any solution?

  Hello
   
  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Windows XP Technet Forums.
  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
   
   
  I hope this helps.

• Windows xp - path too long

  Hiya,

  I work for a company to use the digital camera and retrieve images dailly.

  However, the memory card, I'm trying to use won't be open, "path too long". I clicked on 'Properties', where it is said there are files and folders in there.

  Please could you help me to get into these files, it is very important recover us these photos.

  Thanks again x

  EDIT: Sorry I seem to have posted this in the wrong section - I posted 1 in the section "xp". Sorry, this is the 1st time I used microsoft answers xxx

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Downloaded a zipped file/folder would not, the name is too long.

  I have downloaded a compressed file/folder to a trusted site that I always. I unzipped the file (Music mp3) successfully and added to my itunes. When I tried to drag the file of music on my ipod, itunes shows his location could not be found. I went and checked on the folder I unzipped and all these other files with weird characters appears. It took 145 GB of space in my external hardrive (thank goodess). Now, I can't rename or delete the file or the folder itself. I tried a few removal tools but it did not work or when I try to download, my anti-virus software reports me. I need a way to get rid of the file. The budget is tight, so it would help if it's freeware. OR better yet a way to removed without having to download any software. I tried to delete it in safe mod and BACK. Without success. Tried Unlocker and D something software too.

  Have you tried Unlocker which would have been my first recommendation.  I don't know other programs (especially turned to the long name) free file deletion. If Unlocker doesn't work, or none will remove utilitly in Vista (because Unlocker is better than Vista).

  The commercial product ($19 I think) says that he specifically deletes files whose names are too long. http://www.abtollc.com/Folder-Delete.aspx.  I suspect that this will do the trick, but of course I can't be sure so try there is a risk that it will not solve the problem in spite of spending money on it.

  Your problem with the file may be a permissions problem.  Make sure that you have the permissions of all rights and take possession (and maybe both parent folders).  Don't forget to check the Advnaced properties for special permissions that restrict rights or inherit permissions from parent folders - you may need to remove if you already have all the rights on the main screen.  Here are the procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I have no other suggestions at this point.  What is the EXACT and the full path of this folder?  Depending on where it is, we are able to create a new user profile (treat your as if it is corrupted) and traansfer all data EXCEPT the folder in the new profile.  Then delete the old provile if he leaves despite this file - it might or it might not (I'm not sure).

  To try this http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profileuse.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  You can also try to enter in a command prompt: click on start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.  There Cd type a space and then type the path of the fulll name the folder in question (if it even appears).  Once inside the folder type del *. * and see what happens.  It can give you the same error message, or it can remove. Once the content is deleted type cd, and then type del (yes I know it's long) and enter. This can remove the folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• HP LaserJet 1536dnf MFP - installation took too long to run.

  Try installing a laserjet MFP M125a pro on a computer running windows 10.  Get "use installation was taking too long to execute.  This is a fatal error. "I reinstalled the driver software hp, the most recent assistance from the Download Center.  I made sure to print spooler tye is in automatic mode, according to the following link:

  http://support.HP.com/us-en/product/HP-LaserJet-M1530-multifunction-printer-series/3974271/model/397...

  No luck.  Still will not install.

  Hi samshube,

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using HP LaserJet Pro MFP M125/126 series full software and drivers. (Expect that the software will ask you to connect the printer USB cable.)

  Run the HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these steps help!

• Trying to download music or copy files to a cd, I get the message "the file name is invalid or too long.

  Trying to download music or copy files to a cd, I get the message "the file name is invalid or too long.

  Hello

  1 when you download the files?

  If the files are located in deep in the files to copy or cut the file on the desktop or on the desktop and then check please.

  You can check the blog next deal with a similar problem.
  Team Build and 260 + character paths
  http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LaserJetPro HP 1102w impression takes too long

  Hello

  I installed HP 1102w on my laptop using the driver from the CD. Printing is configured using USB and ePrint is disabled.

  Printing takes very long (18 s). When I send a print job (even test page), I don't see that it appears in the printer job window liquid. However until I see that some data has been sent to the printer (for example 4 KB / 146kb) time is about 9 seconds. To start sending data up to what the page is printed is another second 8-9 so time total is Reiver 18 seconds in the best of cases.

  My laptop is:

  Windows Visa Business, 3 GB of RAM, Dual-Core clocked at 1.6 GHZ, SSD drive 120 GB.

  I tried to install the XPS (planned it will be faster) driver for this printer however failed to install with the 0x070c error code.

  Please have a tip how to print faster (reduce the time of 8 seconds until that data is sent to the printer)

  Thank you

  Miro.

  Hi @MKLI ,

  I see by your post that the printer takes too long to print in a USB connection. I would like to help you today.

  What kind of documents you print? (PDF, Txt)

  Have what applications you tried?

  Try a different file or application to see if you have the same results.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Printing a Configuration Page. Select the method two.

  Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable should not be more then 6 feet. Try a different USB port on the laptop. Some ports are higher power then others. You may need to try another USB cable to see if that causes this problem.

  Check the power on the computer to see if that is causing the problem.

  How to make in the Windows Device Manager?

  Go to Device Manager, under Bus for each made USB root hub controllers right click and left click on properties, for the management of the power supply remove the check box for "allow the computer to turn off this device to save energy. It allows the computer to restrict or cut off the power for this unit.

  Restart the spooler to print on the laptop.

  Click Start (), type services.msc in the Search box and press ENTER.

  Find the service named print spooler, right click and select Properties. Click on stop and then click Start.

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Webcam works do not, Lenovo U310, Windows 7, 64 bit, Youcam not detected

  I have a Lenovo U310, Win7 64 bit which is around 2 years its integrated YouCam 3 webcam is inoperative for a few months now.

  Cyberlink YouCam does not appear in the device indeed Manager that no camera is to be detected despite the opening of hidden devices. A virtual driver Cyberlink WebCam is under sound, video controller & game, do not know if it is.

  Clicking Youcam, request alerts, " No webcam detected, try to connect or switch". I reinstalled YouCam driver Lenovo site several times now. But it still won't start.

  It's already happened and one day he started work. Need to understand the issue and fix it for good.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest to create a new user account with admin rights and check if the problem persists. Check out the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem persists I would recommend you contact the manufacturer of your laptop, because it might be an unwanted material. See the link below for more information:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/IdeaPad-u-series-laptops/IdeaPad-U310

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• 'File name' error too long when you copy a folder to a DVD disc

  When I copy a folder that contains a large number of files on an external hard drive, I have no problem, but if I try to copy the same folder to a DVD disc, I get a message indicating that a file name is too long.  My first question is why do I get the message for DVD and not the external hard drive?  My second question is: How can I generate a list of files in my folder that have too long names? My second question is already other post on the forum, but there was no answer.  Is it because it is not possible to generate such a list?

  Thank you

  It depends on what is called the 'file system '. File systems are how files are stored on a disk. Many of them have limits on how long the total file path can be. DVD and external hard drives use different file systems.

  If you want a list of all the files in a folder, open a command prompt. Type this in:

  CD "C:\path\to\folder".

  and press ENTER. Replace path\to\folder with the path of the file in your file that you want to check to make sure this filepath is in quotes!

  Now type:

  dir /s > 'output.txt '.

  and press ENTER. This will tell the guest to make a list of all the files in this folder and in each subfolder, and then store in a text file. This will allow you to view the list and I hope to find the long file names. Once you have found the long file name, go to that file, and then change the name.

  Here is an example of the above commands. Let's say I have a folder named "foo" in the My Documents folder. I first type:

  CD "C:\Users\Entegy\Documents\foo".

  and press ENTER. Now, I want the list of files to be placed on my desk. Then I type:

  dir /s > "C:\Users\Entegy\Desktop\filelist.txt."

  And voila, I have a list of all the content of foo on my desktop files. Just make sure that your path ends with .txt and you'll be fine. And don't forget to put quotes around filepaths!