LG smart tv webos 50 lb 671 auto connection problem

Similar Questions

• TMS 14.3 - auto connect problem - multiple call attempts

  Hi people,

  I have a client with an environment with TMS 14.3, conductor XC 2.2, VCS 7.2.2 TP Server 3.1 and CUCM 8.6.2. They have several items on VCS and several endpoints of CTS/TX registered to CUCM Cisco and Polycom endpoints. There is a trunk SIP between CUCM and VCS. Conductor is integrated with VCS by using the B2BUA deployment model. TP server is behind the driver used as multipoint resource only for conferences scheduled through TMS.

  We are having problems when planning a Conference at TMS using type "Auto-connect" and setting driver to dial a number to the selected participants. For some end points when the meeting starts, conductor made several calls try to participants, even after participants answering the call. For example, conductor connects to an endpoint 3000 CTS, CTS answers the call and connect to the meeting, but a few seconds later, conductor's call another attempt at the endpoint, then endpoint answers the second call and put the first call on hold.

  This problem occurs for the following parameters:

  • Endpoints of Polycom HDX series
  • CUCM items of endpoint CTS/TX
  • Outside dial participants (those selected on the tab 'External' to the planning page)

  The problem does not occur for any endpoint TC registered in VCS.

  As a troubleshooting step, the client was trying to configure TMS to try to connect to the participants once (using the "Attempts to connect for scheduled calls" setting value 1), but the issue still occur.

  Tomorrow, I'll be on the customer's site to check if this strange behavior has been generated by TMS or by the chef himself. I really think that it is some sort of bug. I don't know that their environment has been configured properly according to the Cisco documentation, because I was the person who made the project.

  I'd appreciate any suggestions really.   =)

  Thanks in advance.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  Hi Paulo,

  a few days back we had seen this problem and I filed the bug "CSCui90143."

  Currently, we anticipate that this problem occurs because the MSD is not able to understand the message of feedback from the conductor.

  I hope that clarifies. I don't have to if you want to be able to access the bug or not.

  Rgds

  Alok

• I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

  alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

• HP dv7t 7200 wifi like no auto connection

  whenever I turn on my laptop, it connects to the WiFi for a short period of time and then dissconnects and I have to reconnect to the network manually. After doing this, it takes an extremely long time to login automatic and says "network connection takes longer than usual. I have the wireless card/adapter "Intel Centrino Wireless - N 2230" and the driver version is "15.10.3.2" I don't know if it comes to the latest version, but I tried to update and was not able to do this successfully. any help would be appreciated thanks in advance. This happens also on any wifi I connect, wi - fi even I log in for the first time takes an extremely long time to connect (2-5 minutes).

  any help to solve this problem for my computer to quickly connect / auto connect to networks again would be greatly apreciated.

  p.s. I've ever experienced this problem when I got the laptop first, so I don't know that it's happened in the past 6 months - 1 year.

  

  I managed to sucesfully (at least temporarily) fix the slow connection error by uninstalling my network adapter (I left her uninstall driver box unchecked during this operation) in devices, reboot and then Connection Manager. It is connected to the normal speed. I have not yet tested to see if the same problem has been resolved, but I'll come back to that when I test it later.

• Remote Access Auto Connection Manager and error with a VPN work

  I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

  Hello hitherandthee,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• disable the option to auto-connect to any wifi network

  I managed a number of tablets for the work. We have win 7 installed. Sometimes users to connect to their home wifi network - or other wifi networks as required. but it is essential that the Tablet does not automatically connect to a network at startup. I understand, it is possible to uncheck auto connect once a network has a profile, but I would prefer that there is no option to auto connect at all and if there must be than the defult do not do self rather than auto connect by defult?

  Thanks in advance for your help

  Hello

  There is an easy way to start the computer disconnected with wireless.

  1. Command line opened as administrator by right click on CMD Run As Administrator
  2. This command to type: sc config Wlansvc start = demand
  3. This will set the service WLAN to the on demand service which means user must initiate the connection after the start
  4. You can then create BEATS with this command, the user can activate/wireless:sc start Wlansvc
  Let me know the results and if this is the solution you need. You can set it back to the original of the application settings to replace withauto

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• What is the number of attempts to "Auto-connect" in MSDS.

  Hello

  I would like to know, how many times a TMS would attempt a point of termination/MCU while trying to send shout information - before you say

  'Allocate failed, the Conference is not automatically connected.

  The type of conference is auto connect

  Automatic connection: Cisco TMS will automatically connect participants to the date and time specified.

  Hello

  Seems more like a first try and then try to re 3-tent after the initial report and it seems to be the same for the CHT and the MCU.

  So 1 initial attempts + 3 before it says it can not it automatically connect.

  / Magnus

• How can I configure Auto-Connect USB devices

  We have Dell FX160 XP embedded with USB cdrom drives, view 4.6, PCOIP and want to be able to auto-connect without the user click on the disc whenever they connect.

  I was told that I can do through gpo. Has anyone got the job and could tell me how to do?

  Thank you

  Enable group policy to:

  Connect USB devices to the desktop on the launch

  Connect USB devices to the desktop when they are attached

  These are in the vdm_client.adm model.

  For specific instructions on the use of these templates VMware, please consult the Configuration section group in http://paulslager.com/?p=913 policy

• Auto Connect USB devices?

  Is it possible to get the customer discovers automatically connect a USB device when it is plugged on the endpoint?  More precisely from watching this for USB flash drives.

  A few times I set to make sure that we are on the same page.

  Me auto connect USB devices average transmit any USB device connected to the customer automatically to the virtual desktop without user interaction.

  This function exists today with view depending on the client device that you use. It works with RDP when using a Linux-based system think that customer and PCoIP with Linux customer base light or zero clients.

  Capacity does not currently exist with the Windows client. It will exist in the future with the Windows client if the device is set before the start of the session. If tied after the start of the session, it will still a user interaction.

  WP

• Intel PROSet will not Auto Connect

  M6300 XP64, Intel PROSet Wireless 11.1.1.3 software version

  "Once you connect to the network, it is saved as a profile. When you're not connected, Intel PROSet/Wireless attempts to connect automatically in the order specified in this list. »

  NO - IT IS NOT

  I checked that it is set to Auto Connect.

  Properties > advanced > Auto Connect > Auto (default)

  The only way I can connect is starting the PROSet software, then select an available network connection listed, then click on connect.  Here are the networks shown in my profile.  Everything looks like it should work, it's not fair.

  What's wrong???  TIA

  
  

• How to turn off auto connect feature in SQLDeveloper connections Manager

  Hi guys,.
  
  I work with SQLDeveloper 2.1.1 (Patch 1)
  
  It tries to connect to the target always after you have right clicked on saved connection from within the list of the connection manager.
  
  Does anyone know how to disable this auto connect feature SQLDeveloper?
  
  Any help would be appropriate.
  
  Bravo!

  Try to remove/disable

  Open Insider View (4thelephant) initiated SQLDeveloper

  As far as I know, he is not yet certified for 2.1

• The Smart TV Toshiba 32L6363DG and WLAN connection problem

  Hello

  I have a Toshiba 32L6363DG Smart TV.

  I have a wireless access Point and I would like to connect my TV!

  I chose the option of each network configuration: easy, manual or assisted.
  At first, when I enter the security key and configure all, it seems that it does not connect because he accepts and tells me I am connected

  Information out there "Wireless Configuration complete", IP and DNS address is automatically assigned. The network connection test tells me "unable to connect network connection, please check your network settings.

  I'M NOT THE ONLY ONE WHO HAS THIS PROBLEM, I HAVE READ IN MANY FORUMS IN GERMAN AND ENGLISH, THAT PEOPLE HAVE THE SAME PROBLEM WITH THEIR TOSHIBA TV.

  WiFi works fine for my computer and mobile phone.
  About the same distance from the AP that television (about 3-4 meters, no wall or obstacles) the intensity of the signal is HIGH on TV and everything should work, but doesn't.

  I need help

  Well, try to reset the TV to factory State setting and try to configure the WiFi connection once more
  Make sure that everything has been properly configured.

  According to the material information the TV supports the WLan standard
  802.11a/b/g/n and the type of encryption:
  WEP 64/128, TKIP, AES,
  WPA/WPA2-PSK

  I recommend you test the following encryption settings.

• DV6Z will not Auto-Connect to the Wi - Fi connection

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  GP_01 wrote:

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...

• Auto focus problem Canon 70 d in T, A, M, P mode

  Help, please?

  Auto focus on my Canon 70 d does not work in P, T, A and M mode, everything works perfectly in Auto, CA and SCN mode.

  I have to press the AF button - it focus when you take a picture. But if I use mode live view, that autofocus does not work normally.

  I think that by pressing the shutter button in halfway should always begin by focusing, also for the T, A, M and P mode?

  I tried to restore factory settings, but it does not help a thing.

  Y at - there somewhere a setting I should change, I think bad or my camera does not work properly?

  Thanks for any help!

  Regard, Gerard

  Hi Gerard,.

  The 70 d (like most Canon DSLRs) has customization options to assign the button (s) perform the function of auto focus (AF). Looks like these options have been changed from their original default settings.

  To see if this is the case, check the settings of the C.Fn III on your camera. See pages 383-386 of your manual. You can see that your shutter button is more set to start AF perfom.

  You can reset those C.Fn III - 4 setting default original settings by pressing the "trash icon" while in the menu screen shown in step 3 on page 383. See note in blue at the bottom of this page.

  And note that the option 'Clear all camera settings', found on page 61 of the manual does not reset the custom functions. This can therefore explain why your restore settings try earlier did not help.

  Bill

• Switch unknown error '-auto in problems xp

  Hello
  I'm having this error also and use windows xp, how can I do to fix?
  I did a virus scan and anti-malware and they both come clean and still no matter what I do on my computer, I get this error. Indeed, it is start minute windows. I also did a scan of starting time and started my pc in safe mode and uninstalled just about everything on my computer and still get this same error message.
  Does anyone have any ideas other than formatting?

  I get the error message there is exact error message unknown switch '-auto'

  Thank you in advance,
  Patti

  I uninstalled the program 'Print projects' - not 'creations' as call other positions, and the automatic switch unknown error box has not reappeared. It is a commercial program installed when I installed a new Kodak multifunction printer. Funny, I do generally safe do not install all the stuff in option when I have the new software (Quicken and TurboTax are the worst offenders)

  Anyway, looking for projects for printing on your hard drive and get rid of