Y510P dvd player not working not not after update Win 10

Similar Questions

• DVD player not working not not with win 8.1

  Hello. I have the HP pavilion 15-e020TU laptop. My DVD player has worked with windows 7 and windows 8. After the upgrade to windows 8.1, the DVD player does not work. The Windows Device Manager find the DVD player, but represents a brand yellow error. I chose "update driver software" and then "automatically search for updates of driver software". Then the name changed from 'Mitsumi CD drive' to 'hp DVD A DU8A5SH'. And still does not. I installed the update of the firmware from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv481en&cc=us&dlc=en&lc=en&jum... But a command prompt displays "error: no readers mitsumi found.» What can I do now?

  Hello:

  Try each of the steps in resolution 2, 3, 4 & 5 on the link below.

  One of them normally solves the problem.

  http://support.Microsoft.com/kb/314060

• DVD player not working not not since upgrading to Windows 10?

  Improved to win 10 of Win 7 and now cannot get my DVD player to work. Checked info from Device Manager which advises (Windows cannot start this hardware device because its configuration in the registry information is incomplete or damaged (code 19).) I tried to remove and reinstall the DVD player, but the error message still appears. Any ideas of how to solve my problem?
  My last resort would be to roll back to Windows 7 if I can't figure it out. : confused:

  I have the same problem with my SATELLITE A500 - 19(d) is code19 drivers must not be installed correctly.

• Windows Live Mail does not not after update kb2454826

  Windows Live Mail does not not after updating automatic kb2454826

  Windows Live Mail stops responding or does not start after the installation of KB2454826 (revision 10 Feb-11)
  http://support.Microsoft.com/kb/2505524 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• DVD player not working not not Satellite Pro A100 - Code 37 error

  Hello

  Someone help on this?

  I have an A-100 and the DVD player has stopped working in XP. I checked the Device Manager and see XP disc but returns this error "Windows cannot initialize the device of this hardware driver. (Code 37) »

  I also noticed that ASAPI.sys is not running in the Task Manager.

  I'm guessing this has something to do with the problem.

  I tried to reinstall the device drivers, but this made no difference. Any suggestions?

  Hello

  Error code 37 means the driver returned failure from its DriverEntry routine.
  You can try to delete the driver from Device Manager and rebooted the new OS should recognize the drive device and initialize the driver again.

  If this is not enough, try this procedure:
  Run REGEDIT and open the following folders:

  HKEY_LOCAL_MACHINE
  -> SYSTEM
  -> CurrentControlSet
  -> Control
  -> Class
  {4D36E965-E325-11CE-BFC1-08002BE10318}

  After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
  "Upperfilters".
  'Lowerfilters '.

  Click on each of them, press DELETE, and then click YES.

  Then restart the laptop and see if it was useful.

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• DVD player not working not not on Satellite Pro U400-142

  My DVD player does not work. I insert a disc, you can hear the drive works for some time, but then nothing happens. I checked the Device Manager' - under readers of CD-ROM/DVD-ROM it shows: MAST * A DVD-RAM UJ862AS, but there is a black exclamation point in a yellow circle next to it. I opened the dialog box 'Properties' and under the status of the device, he wrote:

  "Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I would try try to resolve the problem by reinstalling the driver. I checked Toshiba site for the driver, but can't find it.

  I would be very grateful if someone could give me some ideas on how to sove this problem.

  Thank you

  P

  What you can do is follow:
  Remove the optical drive from Device Manager drive, restart your laptop.
  The reader should be acknowledged and properly installed. If the same thing happens again try it please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• DVD player not working not not on Sat 1800-614

  Hello

  I bought a Satellite 1800 614 3 years ago, provided with a DVD player. At this time there is no problem to read the DVD. I did not use it for a while and when I tried to use it I discovered that it does not read new DVD, I can see the movie but the two images and audios are dispersed and disrupted last year. It only works with the old DVD (2001-2002) and DVX and so on...

  I was told that it is because they changed the format of DVD or something like that. Can you help me to fix it? Is it possible to update the BIOS any help? Maybe the firmware? You know the one that I need and where I can find it? I tried to update the drivers for DVD but it seems that he does not accept the change. Do you know how to update the drivers too?

  THANKS TO ANYONE WHO CAN HELP! I HAD THIS DVD PLAYER AND I NEVER GOT TO USE IT!

  Hello

  I put t know if you tried, but you can try to install some beyond news who is responsible for playing movies on dvd (files)

• DVD player not recognized after starting in windows server 2003 r2

  I installed Windows Server 2003 R2 Std on my HP DL180 G6 by using the internal DVD player, but after booting into windows, the DVD drive could not be recognized and it's showing in the 'PCI device' Device Manager under "Unknown device" with a yellow question mark. I googled and tried some of the solutions, also tried to reformat and reinstall Windows, but still facing the same problem. HP support gave me some solutions like updated BIOS, erasing the CMOS memory, unplug and plug back the sata cable, but always without success.

  Hi Lilida85,

  The question you have posted is related to Windows Server 2003 R2 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  Windows Server

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Burning DVDs in DVD player not working not

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  ============================================
  Burn a video DVD that will play in a free-standing DVD player you
  need software for DVD creation... the only version of Windows XP that
  included this option was the "Windows XP Media Center Edition 2005.

  See the following article:

  Movie Maker 2 and DVD burning software-
  Media Center 2005 Edition
  http://www.Papajohn.org/mm2-DVD-MCE.html

  Perhaps the following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows 7 Media Player not working not not after update

  I recently installed updates on my PC. I am currently running microsoft 7. Now my Media Player will not work. Nor I can play YouTube videos on the web. Videos on the web come in white & if I try to open windows media player I get the following error:
  Setup_wm.exe - Application error
  The application was unable to start correctly (0xc0000005). Click OK to close the application.

  Please help me solve this problem. It worked fine before the update.
  Thank you.

  Hi Kallaher'sFamily,.

  ·         You use Internet Explorer? If so, what version of IE are you using?

  ·         The updates have been installed?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Uninstall and reinstall Windows Media Player from Windows features turn on or off. Follow these steps:

  (a) click Start, type the turn Windows features on or off in the start search box and press ENTER.

  (b) uncheck the features of media.

  (c) restart the computer and follow the same steps to reinstall windows media player.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For reference:

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294 (if you use Internet Explorer)

• DVD player not working not properly

  my DVD player worked... then all of a sudden one day, it did not show the DVD I insert... and I have tried others... the same result came... when I try to open the drive d, it says please insert a DVD, but I have all ready insert a... I tried to update and it says the new update have all ready installed... Please if anyone knows how to solve this problem... send me an answer as soon as POSSIBLE... Thank you

  Hello

  I suggest to try this patch and see if that helps:

  http://www.kapilarya.com/Windows-8-not-showing-DVD-drive

  I hope this helps. Good luck :)

• After the new installed hard drive, DVD player, not to recognize any media

  given that I had a new hard drive installed my dvd will not play any type of media, or play any DVD including those that I burned to a disc, since the new drive has been installed. I tried to download the drivers and utilities, I got with my comp. but like I said it will not read. I even tried to download dell canada drives, but still no help. also, my webcam does not work as well and again tried to download from disk but no luck.

  Hello

  ·         What happens when you insert the CD into the CD/DVD drive?

  ·         Do you have an error message when you try to play the CD?

  I suggest you try to fix this problem automatically by clicking on Fix It in the steps below:

  Step 1:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  Step 2:

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Step 3:
  Your CD or DVD drive cannot read or write media - Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the issue still exists post returns with the information requested in questions.

• I need a update for my HP DVD player & not rely on Microsoft

  I have a problem with HP DVD & I tend to disagree if is saying that my DVD drive (HP DVD RW AD - 7586H) must be replaced. My dvd player works when he wants (has a clean spirit). The last update for my DVD drive is 21/06/2006 (7 years and enjoyed passing updated driver). Ive uninstalled my DVD drive & reinstalled after startup & has nothing there is never, ever a update for my via DriverBooster, DriverScanner or my in-kind Assistant from HP DVD drive & I used a certain programs to update my driver (Driverbooster, DriverScanner etc.). NEVER. If HP can give me a BIOS update, why not send me a DVD Player update through me HP Support Assistant HP?  Well, I think this is a time of combat that HP should create an update to solve all the problems of DVD rather than depend on Microsoft to fix it. If my DVD drive was well Windows I would use the microsoft Fixits, but since it is a HP DVD drive, I think HP should solve the problem, not Microsoft.

  What you see in the Device Manager is the driver control for the dvd player, what are you really need to look at is the version of the firmware on your dvd player & see if a newer firmware is available.

  Usually many even intermittent faults are more material than firmware, readers are very cheap but & can access a job of 2 minutes to replace if necessary more you a better quality disc & spec as you wish.

  I think KH21 is new firmware for this dvd player.