Libraries CC does not not at startup

Similar Questions

• Vista does not start; Startup, System Recovery repair, etc. do not work. Help, please.

  I need to know how to get my computer to the top and will again and without a hitch. When I turn on my computer, the Vaio logo has lines on it, then it flashes red and black pixelation, then goes into the Startup Repair. After the execution, he said, "Startup repair tried several times but still not determine the cause of the problem." I ran to the recovery of the system several times, and whenever it says it succeeded, but windows still does not work and I start this process again. Please help me with this situation; I need your advice.

  Hello

  because of the problem of the color, looks like you can have either a corrupt graphics driver, or for the lack of graphics hardware

  If, in accordance with manufacturer's warranty contact

  If it is under warranty, contact your local reputable computer repair workshop

  and as you say you have also problems of retrieval system, which is probably related to this problem of graphics contact your computer rmanufacturer

  It's their recovery process not microsofts

• Windows xp on startup does not complete startup.

  When starting the pc with windows XP, when the screen appears, there not all icons showing and no cursor. After the stop and start several times, I'll get a full desktop with all icons and a slider screen. then the pc works normally after that.

  Hi Clifton,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you receive a black screen at startup.

  This problem occurs if one or more of the following elements are corrupted and won't load during the computer startup sequence:

  • Master boot record
  • Partition tables
  • Boot sector
  • NTLDR file

  Perform the steps from the link below and see if it helps.

  Computer stops responding with a black screen when you start Windows XP 

  Answer to us if you are having problems with the black screen or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Libraries works does not properly after Downgrade to Windows 7 of 10

  Demoted from 10 to 7 through "Go back to Windows 7" in the control panel-> update of the security & -> Recovery Windows 10. Everything seemed successful, having problems with scheduled tasks (but that's another issue, see reference).

  All my libraries are present and at first glance seem to work fine but I was making a few mistakes in some of my apps used regularly when you access files in libraries. So I decided to track down the mystery and I think it's related to the path of the file property - for example, the path begins with something like:

  '\\?\Volume{31BFC97B-09A1-11E3-8C84-806E6F6E6963}\ '.

  I think that this is related as:

  -When I double-click a video (thanks to my video library) my playlist video application (which should list all the videos in the current folder) displays a list of "\".

  -When I try to transfer files (via Teracopy) I get an error message "widepathmax" four times for each file transferred, and despite all the success, it's very annoying and boring. I've disabled Teracopy and tried again to transfer, but native file transfer has not yet shown upward. All works well when do not transfer files using libraries.

  Any help will be greatly appreciated

  (Reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-update/task-scheduler-multiple-image-is-corrupt-or-has/6205cb04-a749-4f4f-a5be-632e01989158)

  Hello!

  Have you created custom in addition to the default libraries?

  To restore the default libraries, right-click on 'Libraries' and choose ' Restore default libraries.

  You can try to remove one of the custom libraries and create them again and include folders in the libraries manually.

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CC libraries still does not not in CC2015

  Hello

  Even though the CC2015 updates, I'm not able to put anything in a CC library with the exception of swatches of stil.

  This is true for Illustrator, Photoshop and InDesign.

  Whenever I try to put an image in a CC library, nothing happens, and only Illustrator comes with this message:

  
  

  
  

  
  

  Photoshop and InDesign just do nothing.
  

  And no matter that I drag the item in the "library" window or click on the appropriate button (add chart). Nothing happens.

  Is there a 'hidden' setting I'm not aware of this get all to work?

  
  

  Another thing:
  

  When I go to my assets on the Web, I can see all the libraries, I created (all with shades of colors), but they do not appear in my 'Creative Cloud Files' folder on my iMac.

  All the other files that I have on my creative cloud are also available locally, but not libraries CC. Is this normal?

  
  

  My config:

  
  

  
  

  
  

  
  

  Ok

  Thanks the Apple community, I solved this problem.

  Yes, I can add assets to any CC library!

  It has everything to do with permissions.

  This response to my post on the Apple Forum has resolved:

  A link to this post

  Why Adobe can't happen at such a response?

• The MacBook Pro 17 "does not complete startup.

  My Macbook Pro 17 "using OS X Yosemite.  1 TB HDD, 8 GB memory

  Start the computer turns on, the Logo appears screen goes black. Power cord turns green. no power light.

  Sorry

  http://www.Apple.com/support/MacBookPro-videoissues/

  Jason Nvm

• Finder: Search in the current folder does not work

  I have a folder in my finder 'search in the current folder' where returns 0 results even though I get the names of the files in this folder.

  I tried to add this to the honor, then removing it so that its reindexed and I tried to remove finder invisible (and other) files, but that is not worked.

  I ca 300 PDF files in this folder. I tried to create the new folder somewhere else and add these PDF here and yet the search does not work.

  Someone knows how to fix this?

  Greetings eklisiarh,

  Thanks for posting in the communities of Support from Apple. I see that there is a folder with about 300 PDF files that you are not able to search through the search option. I know that the research allows me to find just the right file. I'll be more than happy to help.

  You did a great job so far with re-indexing of that folder. First of all, to start in safe mode. This will be clear cache files and perform a few system checks. Once in safe mode, see if you can search inside this folder. Here is the article about how to start in safe mode. You can ignore the part where it says "If your Mac does not complete startup".

  Try safe mode if your Mac does not end commissioning - Apple Support

  Reboot will leave safe mode. If this does not work, try to test this question in a new user and copy the folder in this new user to see if this is a question broad system.

  How to test a question in another account on your Mac - Apple Support

  Make account and let us know how things are going.

  Take care!

• BIOS on Satellite L350 does not recognize devices

  Hello

  I have a Satalite L350 breaking in windows after about 1 min of loading. I thought that maybe the hard drive was defective, so I tried to run a program I called PC test 6. I then discovered that the cd player would not read. I then tried a CD USB player and again it would not start a disc. After resetting the BIOS to default settings, I discovered that the BIOS is not recognizing any device other than the hard drive. I took the hard drive and tested with PC Check via another PC and HD spent.

  Now I want to reinstall windows, but the CD player does not start. I guess that the problem comes my BIOS maybe flashing (InsydeH20 version 1.5) it would work? But... no device USB and CD: S

  Any ideas that I can please?

  Hello

  I don t think that the BIOS is the problem.
  The BIOS recognized HARD drive correctly. Right?
  Well, I think that the CD/DVD drive is faulty if the BIOS cannot recognize what
  Furthermore the L350 BIOS does not support startup from the CD/DVD USB drive.
  It is not possible

  If you want to install the recovery disk operating system, then you need to replace the internal CD/DVD drive because it appears to be defective

  Of course, it's my personal choice and just a suggestion

• HP pavilion model 13-A113CL: HP pavilion does not open! Help!

  I pressed the power button to turn on, click on my name to get into the computer and the circle began to turn - loading - and that's all. Has continued to charge for one hour... I tried unplugging, turning off the coast and back in and it's on the same startup screen, loading. How to stop loading and let me in my computer? I have a huge book in 2 days, I need to enter my computer! Please help me!

  Sarahb9227

  Hello;

  Let me welcome you on the HP forums!

  I read your message on your portable computer does not complete startup and wanted to help.

  With Win10, you get automatically updates Windows and MS just pushed a bunch of updates last night.  All my PC Win10 entered the same boot loop this morning.

  Just restart and wait because it can take a long time for the updates to all the.

  If he keeps this tomorrow, we think about alternative measures.

  Please keep us informed.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• The mouse and the keyboard does not - start or boot (s) failed to load i8024 system

  original title: salvation. Mouse and keyboard does not.  startup or start-up system (s) failed to load i8024.  ?? 1000 thank you!

  Sorry, don't know what information is needed. Still 1000 thanks.  XP family; the mouse usb.

  The following should be helpful.

  http://social.technet.Microsoft.com/forums/pl-PL/itprovistahardware/thread/cb03f7ec-95c9-406e-af07-cff86eaa9ee0

• Help! My computer does not start

  My computer does not start. I get a message about missing files. What can I do?

  You may be able to perform a startup repair.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is located in the System Recovery Options menu, which is located on the Windows Vista installation disc. If your computer manufacturer has preinstalled the recovery options, Startup Repair can also be installed on your hard drive. If your computer does not have the Startup Repair, your computer manufacturer can have customized or replaced the tool. See the documentation provided with your computer or go to the manufacturer's Web site.

  Please see the following site for more information on using Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex

  ·         Insert the installation disc.

  ·         Restart your computer.

  ·         Click Start, click the arrow next to the button lock and then click on restart.

  ·         If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  ·         Choose your language settings, and then click Next.

  ·         Click on repair your computer.

  ·         Select the operating system you want to repair, and then click Next.

  ·         In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  ·          Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  ·         Click the Start button, click the arrow next to the button lock and then click on restart.

  ·          Do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  ·          In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

  Select a keyboard layout, and then click Next.

  ·          Select a user name and password, and then click OK.

  ·          In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

• Keyboard shortcuts in startup does not

  Hello

  I recently inherited a Mac Pro G5 (?). I don't know precisely what device it is. I entered the serial number on the Apple website and it says that the SN was not recognized for the purposes of support.

  It has been used as a device of company running OS X Server (last known BONE was Lion/Mountain Lion?)

  Initially, only shortened boot that worked was "Single User Mode", and I created a startup El Capitan disc and it let me finally allows to choose the boot device. Once I chose the external hard drive, the mouse is not responding pluse for awhile and then it restarts to the OS X Server login screen. I do not have the original client credentials, or I couldn't find a way to download an older version of OS X. I tell myself that it does not start out because it can't handle El Capitan (obviously).

  Any thoughts?

  To identify try to enter the serial number here:

  http://www.appleserialnumberinfo.com/desktop/index.php

  http://www.EveryMac.com/ultimate-Mac-lookup/

  All Power PC Mac (G3, G4 and G5) superior 10.5.8.

  Only Macs with Intel processors can go higher

  You have a silver to turn 40 Mac Book?

  

  Image does not display after the validation, but displays when editing.

  G5 and two smaller fans on the back, one on the other. The Mac Pro has only one big fan in the back

  The left is the PowerMac G5 and the right one is Mac Pro equipped with processors intel

  image of

  https://en.Wikipedia.org/wiki/Mac_Pro

• Check for new messages at startup does not work in the first period of 10 minutes after v38 updated. Work at the end of 10 minutes. CAUSE unknown - went away after reinstall

  After the 38.0.1 of 31 thunderbird update does not check for messages at startup, tried on two workstations, mail for a single account on each account, one was pop and other imap. The check box in the accounts-> server settings has no effect. Or not safe mode or the option advanced messages "include this server when getting new messages". "." Activity Manager shows not even he is trying to connect. The question mark function still works well so if I wait 10 minutes he gets messages automatically...

  said rafikiphoto

  I reinstalled the program once more and it works OK but it's already happened and it fails once more.

  The last installation permanently solve this (so far)?

• Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

  Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

  Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

  TT2