Libraries works does not properly after Downgrade to Windows 7 of 10

Similar Questions

• G4-1303AU of the HP Pavilion: HP my laptop works does not properly after installation of window 7ultimate 64-bit

  This laptop is provided by UP Govt (INDIA). I installed windows ultimate 64-bit, 2 days ago and installed all the drivers. But there are two pilots who is errors. These are some

  1)PCI device- ERROR IS- the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  2)Ethernet Controller- ERROR IS - the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  My main problem is this laptop is hangig too permanently. I do not know what is the exact reason and how do I... Its heating not so it's null chance of warming... I want to get rid of this problem of hanging. Please give me link to download the real drivers and the solution for this problem of hanging... As it was not hangig earlier on Windows 7 Home Basic (provided by Hp)

  Hello:

  Here are links to the drivers you need...

  PCI\VEN_10EC & DEV_5209:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  PCI\VEN_10EC & DEV_8136:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  The only suggestion I can offer regarding the laptop works is not so good is to download and install the drivers for the chipset amd from the link below and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Photosmart HP 6510 B211a works does not properly after power failure

  Hi guys,.

  I'm new to this forum, but I hope someone can help me.

  I have a HP all in one Photosmart B211a 6510, which worked like a dream, since I had last winter. We had an unexpected outage yesterday however and once the power came back, the printer insists on the fact that there is no ink in the system. I fear the worst and believe that his brain can be somewhat blurred.

  I have two of your ink cartridges replaced last week with genuine HP ones and everything was fine. My ink level is almost low on the other two, but I have not replaced these yet because it is not necessary.

  Once the power came back, the printer informed me that the magenta ink was 'missing or damaged '. I removed the cartridge, cleaned with distilled water and dry. Once replaced, the printer has changed his mind and told me all the ink cartridges are now 'missing or damaged '. When I opened the printer again, the transport of ink is automatically did not move as usual to allow me to change or remove the cartridges.

  More the touch screen of the printer does not allow me to leave this error message or perform any other function such as cleaning the heads. I tried a soft reset and hard reset, but this proved unsuccessful.

  He's tired? Should I just throw it and head to the stores again?

  Thanks for reading this,

  Fatiha

  Hi rich,

  I replaced the cartridge magenta yesterday and my printer works successfully again! Woohoo!

  My father, an electrician, so between us we have come to the conclusion that when the power came back after the crash there was an electric pick or insufficient tension than normal and this has damaged the chip of the nearest power - the magenta cartridge ink.

  All is well again in any case.

  Thanks for your help - I appreciate it

• Acer X 1930 works does not properly after the factory restore

  It did not work correctly since the restoration of my desktop Acer X 1930 under Windows 7. Now, it shows: "configuration of the Windows updates failed. Returning from the changes.

  Could someone please help?

  Hello, I had problems even when I went back to 10 Win7... The only way I could make it work just is for the first few newspapers in I had to restart my system rather often. I know that this is not a SOLUTION but is what I did...

  Load Windows 7, let the updates for about 3 minutes... I first tried 8 mins but still many updates. So 3 works for me... I am also connected on wire on a Giga lan with Ultra fast connection to my ISP... So time could vary for you...

  After 3 minutes, I had 20 to 26 update ready to be used. Restart the computer. They worked. Makes about 3 times. ON the 4th time I down load 90 updates to see if it would work. And he did very well. Then after that, I went to look at the missing updates to ensure that they were going to update or had... added some that were OPT... on on the last 50ish and they have all updated very well. But for some reason, if I let all try them and update from the beginning, they would fail. I think it's because they have tried to put in the updates before others will want that needed to be done first...

  I do not work for Microsoft or Acer and it is only first hand from one of my systems. This isn't a fix only my way to make it work.

  So if you have a connection interent fast and no more wireless I would say that for the first time you start your computer just let it run for a few minutes then go to the Start button and restart so you do a little at a time...

  I would like to know how it works for you...

  James

• Windows7 - error msgs & MGP works does not properly after changing drive letter

  I am running Windows 7 Home Premium 64-bit.

  When first, I partitioned my HARD drive, the 2nd logical drive was labeled J:, who was the next available letter after all the optical drives and integrated flash memory readers.

  I prefer to label it D: (to follow immediately from the boot partition which is C :).  I used the functionality of disk management to change the drive letter of the J: to D: (and of course move the rest optical drives and integrated flash memory ready in 1 letter).

  When I run some programs, I get this error message:

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  Options click below this message are "Cancel", "Try again" or "continue".

  Some programs, such as Google Chrome, Microsoft Works word processor and spreadsheet, clicking on one of the 3 options will allow the program to operate normally.

  For other programs, such as Windows Live Movie Maker, clicking options will cause a "Drive not ready" message and lead to more problems.  For example, I can not load my existing projects, because I can't get to the screen that allows me to navigate through drives and folders to choose my file.

  I uninstalled and reinstalled the Movie Maker, but the problem is still there.

  Seems to me that it is not the individual programs that are at the origin of the problem, but something in Windows 7 itself.

  How can I get rid of the error messages and get the programs to run normally?  Do I have to edit the registry of Windows 7?  If so, what will exactly be changed?

  Thanks in advance.

  Think I found the answer.  Looks like it is a problem of registry after all.  That's what I did:

  (1) go to the start menu.

  (2) execute Regedit by typing "regedit" in the search box and press .

  (3) the search for "J:" in the whole registry.

  (4) when a directory path is starting by 'J' and the pursuit of my familiar subfolder names, I should now start with "D:" instead, I right click on it, choose "Edit" and change the "J" to "D".  (Note: I only change to directory paths that looked familiar to me and I'm sure that should now start with "D:".)  I change all instances of "J:" that were found).

  (5) once this is over, choose 'File', then 'leave '.

  A ran programs that have already given the error message.  No error message comes this time.  Restarted the PC and programs run.  Once again, no error message.  I hope that things stay effortless.

• BlackBerry App Whatsapp works does not properly after the upgrade of the operating system 10.3.1.1565

  Hello

  After upgrade to OS 10.3.1.1565, I have problems with Whatsapp: when I get pictures, they download more in the photo folder and even I can't open them Whatsapp. They just stay inside the talk of whatsapp fuzzy mode. Advice to solve this problem?

  Thank you and best regards,

  Chris

  On my side, suddenly this problem disappeared... without do me whatever. Strange, but at least it works.

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

  well, I'll start from the beginning.

  the first big mistake I did was change the permissions of the administrator until he was the same trustedinstaller (without this I wouldn't do stupid things, but I did it for a change of details in the registry)

  the strange thing that I've been in conflict with, is that this pc was my mother, so everything to his e-mail address and his name 'Nancy' after some time she gave me the pc so I made my own top user account named "maxim" (that's my name) on my email address and probably deleted the user account from my mother named Nancy so no problem until something has started to bored

  the usersection in solution under C: contained Explorer still card Nancy with some of its documents on the left and some (I have something windowsrelated files)

  so I thought why not remove that card and saw that a card with my name was there too in the usersection, these same unknown files which I think are windowsrelated (btw, these files were hidden but ofcourse to check everything I have chekced the area to see hidden files in Explorer)

  I know not the name of all the files that I have demolished within this named Nancy in user card, but as far as I know, is that files that I noticed (these hidden files) are 7 files ntuser and those who are also in the plan named maxim in this usersectionso I thought no problem and delete the files as managed (with edited permissions)

  now I certainly delete files that I wasn't allowed to, and who were required to run windows properly, I know that, because of the errors, I am when I try to start things or when I try to fix things

  now I searched a LOT on the web especially in the microsoft forums and I fount a lot of 'solutions' that did not work for me

  most of the time, it was because I get an error because I could not more process these configurations etc.

  and somethimes as the scan SFC, he said that the correction of some problems, but there are many problems left that cannot be repaired in this way

  also almost everything I'm doing atm (also when I try to fix my problem) that I have to do with a big traverse most of the time I use "this run dialog box" or the command prompt

  now, these are all the things I tried

  -each 2013 thing tuneup utilities can do (scans included registery) of course I don't know the exact names of the files important I lost so I couldn't those used with tuneup

  -do you have some full scans with Norton 2013 (did not find any problem)

  -does this scan SFC and said there are still problems and has not noticed any difference

  -tried to update my pc did not work (missing windows services)

  -a tried to restart something in the registry did not work (missing windows services)

  -tried to make a new user on my pc did not work (missing windows services)

  -also tried lots of windows, fix things program (I forgot the name of it, but he could only tell me that he had problems and could not fix their)

  I'm shure that I have tried many other things so I mentioned in any case but I forgot the

  Many thanks if someone can help me out as sorry for the great story, but I wanted to tell all I know because it's a sensitive issue and please don't mind my bad English :)

  Maxim

  Your Windows product key can be printed on a label located on the underside of your laptop, if you don't you won't have it. Using the recovery partition, it is a good idea if you have no recovery on a disk media, often there is a Windows repair option, you can try this, however if there is no data on the first partition that you interested, I recommend you just format the partition for essentially erase everything on it and reinstalling Windows on the recovery partition. This will probably not require you to reactivate Windows by using the product key.

  If you cannot use the recovery partition to reinstall Windows, then you can go to this page (on the computer that is working properly) http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only and click on install Windows 8, save the file, run it and choose Install by creating media. This you will get an ISO file that you can burn on this disc you mentioned, just put the disc in your computer, right click on the ISO file and choose burn. It should also not ask to reactivate Windows, if you did no major hardware changes to the computer.
  Again, I would like to know if you need help with any of these steps or if none of these steps work for you.

• SWF animations works does not properly during export to PDF from InDesign

  I use InDesign CS5 and you have created a document that I want to add interactivity and animations to. I created buttons and page destionations, etc., which all work perfectly when you export to PDF, but the simple animation that I wanted to include do not work. The animations were created in InDesign, then exported as a SWF file and then imported selection placed in InDesign and then exported as an interactive PDF where animations either do not work, have not been picked up or gift does not work as it should. What I am doing wrong, how can I get the animations work properly?

  First of all, if you care about your audience, stop using SWF that has now

  ZERO support on mobile devices.

  However after that make sure that InDesign is fully patched, I would recommend

  Place the SWF file in the PDF file in Acrobat Pro instead.

  Bob

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• The Oracle optimizer automatic statistical work does not run after full import

  Hi all
  
  I did a full import in our QA database, import was successful, but GATHER_STATS_JOB does not work after sep 18 2010 if its activation and on demand, I question last_analyzed table to check and confirmed that he has not run after sep18, 2010.
  
  See below for the output
  
  OWNER JOB_NAME HIS STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
  ------------ ------------------------------ ----- --------------- ---------- ---------- ------------------- ----------
  SYS TRUE REGULAR GATHER_STATS_JOB 2010-09-18 06:00:02
  
  
  Collection of statistics work defined automatic optimizer Oracle
  
  =======
  
  SQL > select JOB_NAME, STATUS, OWNER, REQ_START_DATE,.
  TO_CHAR (ACTUAL_START_DATE, ' dd-mm-yyyy HH24:MI:SS) ACTUAL_START_DATE, RUN_DURATION
  of dba_scheduler_job_run_details where
  job_name = order of 'GATHER_STATS_JOB' by ACTUAL_START_DATE asc; 2 3 4
  
  OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
  ------------ ------------------------------ ------------ ------------------------------ ------------------------------
  RUN_DURATION
  --------------------
  SYS GATHER_STATS_JOB MANAGED 16/09/2010 22:00
  + 000 00:00:22
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-17 22:00:02
  + 000 00:00:18
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-18 06:00:02
  + 000 00:00:26
  
  
  What could be the reason for the GATHER_STATS_JOB job does not although his game to automotive
  
  SQL > select dbms_stats.get_param ('AUTOSTATS_TARGET') of double;
  
  DBMS_STATS. GET_PARAM ('AUTOSTATS_TARGET')
  ------------------------------------------------------------------------------------------------------------------------
  Auto
  
  Someone has this kind of experience, please share
  Apprecitate your answers
  
  Concerning
  SRH

  ? So basically you're saying is if none of the tables are changed then GATHER_STATS_JOB will not work, but I see tables are updated again the task does not run. I did > dba_scheduler_jobs request and the State of employment are true and regular. Please see my previous post on the output

  Am I missing something here, I get some parameters parameters

  So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not work.

  GATHER_STATS_JOB will take place, and if there is no table in which there is a 10% change in the data, it will bring together statistics on this table. If no data in the table have changes less than 10 percent, it will bring together not statistics.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#i41282

  I hope this helps.

  -André

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!