Similar Questions

• Error "Library not registered" and "access violation at address 00000000. Read of address 00000000 "while trying to play Call of Duty 2 on Windows 7 64 bit

  Original title: Call of Duty 2 on windows 7: first window said: library not registered. After a minute, seven or more pop-up windows to say the same thing: access violation at address 00000000. Read of address 00000000

  I tried to play Call Of Duty 2 on windows 7 64 premium.  After installation, if I choose to click on the shortcut on the desktop, it keeps invites me to insert the correct CD in the drive.  That right is already in the drive.  If I have the game from the CD autorun, it invites library not registered.  Then opens upward of seven windows or more with the same message: access violation at address 00000000. Read of address 00000000.  the map system, game and video have all been updated and installed the latest patch for Call of Duty 2.  The funky thing is, if I use the fix offered for Vista I can get the multiplayer game to work, but the single player mode is still inaccessible.  I tried changing the compatibility, tried to use the option of windows XP mode and tried to open it in a new window and ran it under administrator.  nothing has worked, suggestions?

  I have thought about it myself, do what I tried above and activate the function of compatibility with Windows Vista service pack 2.  If you do not know the fix vista, click Start, Control Panel, hardware and sound, click sound, and then click the recording TAB.  Right click on a space in the tab itself, when see her disable devices is displayed click on to show them.  stereo mix is show in the tab, right click on that and turn on.  Only, remember, insert the CD, do not autorun installation just right click on the icon setup on the CD itself and open a new window.  run as administrator and install.  After that, go ahead and install the latest version of Patch 1.3 for Call of Duty 2.  When all is said and done don't forget to change the compatibility mode to Windows Vista service Pack 2. Note to Microsoft: Windows XP mode is a great idea, except that you dropped the ball twice, #1 - should have a version of it to support windows 7 Edition home premium for topics such as this for the public #2 - you must enable a way to get the video settings within the windows XP mode , in short to make a windows operating system that will play a game out there that has already been done to PC.

• HELP BlackBerry Messenger platform problem-"Access Violation" when registering

  Hi all

  I am trying to create the object of class BBMPlatformApplication as follows

  and try to save it:

  private class BBMAppPlugin extends BBMPlatformApplication{
          public BBMAppPlugin(){
              super("5FBAD902-0E8C-81AC-E6FF-62D17AFD9BE6");
          }
      }
  

  I create an object of this class and simply try to regisiter using:

  BBMAppPlugin bbmPlugin = new BBMAppPlugin();

  platformContext = BBMPlatformManager.register (bbmPlugin);

  But the meothod of registry, the 9800 Simulator, to 6.0.0 platform, just hangs and gives an error dialog box:

  Internal error - Simulator BlackBerry 9800
  ------------------------------------------
  "Access violation writing to 0x2A5CFD9C.

  After that I also dismiss the dialog box, the Simulator disappears from the display.

  What is going on?

  What is happening with all the codes of the sample as well as BBMSdkDemo of the RIM.

  Someone HELPPPPPPP!

  I call the method register inside another object as follows:

  As soon as the executable is called the error appears:

  /**
  * Constructor.
  */
  BBMHelper(){
  BBMAppPlugin bbmPlugin = new BBMAppPlugin();
      // register the bbmPlugin
      UiApplication.getUiApplication().invokeLater(new Runnable(){
          public void run(){
              try {
                  platformContext = BBMPlatformManager.register(bbmPlugin);
              }
              catch (ControlledAccessException e) {
                  // The BBM platform has been disabled
              }
              if (platformContext != null) {
                  platformContextListener = new TheBBMPlatformContextListener();
                  platformContext.setListener(platformContextListener);
                  screenBBMInvite = new BBMInviteScreen(platformContext);
              }
          }
      });
  }
  

  It's the debug output that I get before the Simulator crashes:

  [0,0] 11/02 19:55:05.257 BBM FutureTask run: net.rim.device.apps.internal.qm.bbm.filetransfer.BBMFileT [0.0] ransferManager@bd3f718c
  [0,0] start FileIO:fileinfo 8
  [0,0] FileIO:info by full name 8
  [0,0] start FileIO:fileinfo 9
  [0,0] FileIO:info by full name 9
  [0,0] FileIO:fileinfo start a
  [0,0] FileIO:info by name full one
  [0,0] b FileIO:fileinfo beginning
  [0,0] FileIO:info by full name b
  [0,0] FileIO:fileinfo start c
  [0,0] FileIO:info by full name c
  [0,0] FileIO:fileinfo beginning d
  [0,0] FileIO:info by full name d
  [0,0] FileIO:fileinfo e beginning
  [0,0] FileIO:info by e full name
  [0,0] f early FileIO:fileinfo
  [0,0] FileIO:info by f full name
  [0,0] FileIO:fileinfo start 10
  [0,0] FileIO:info by full name 10
  [0,0] start FileIO:fileinfo 11
  [0,0] FileIO:info by full name 11
  [0,0] FileIO:fileinfo beginning 12
  [0,0] FileIO:info by full name 12
  [0,0] 11/02 19:55:09.875 BBM FutureTask finish: net.rim.device.apps.internal.qm.bbm.filetransfer.BBMFileT [0.0] ransferManager@bd3f718c
  [0,0] from the tasks planned: Wed Nov 02 19:55:12 America/New_York 2011
  [0,0] beginning 13 FileIO:fileinfo
  [0,0] FileIO:info by 13 full name
  [0,0] start FileIO:fileinfo 14
  [0,0] FileIO:info by full name 14
  [0,0] FileIO:fileinfo start 15
  [0,0] FileIO:info by full name 15
  [0,0] beginning 16 FileIO:fileinfo
  [0,0] FileIO:info by full name 16
  [0,0] FileIO:fileinfo start 17
  [0,0] FileIO:info by full name 17
  [0,0] completing tasks planned: Wed Nov 02 19:55:12 America/New_York 2011
  [0,0] type of bridge: 7 PID: 4028 uninit

  It turns out that there is an IllegalArgumentException in another part of my code.

  But this code was not serious.

  And also I needed to upgrade from version 5.0 to 6.0 blackberry Messenger blackberry app world.

• TH3800.DLL loading of the causes "invalid access to memory location.

  Hello, new.

  I am writing a program of control of temperature thermotron for a school project and I'm having a problem with the drivers provided by Thermotron. I've unpacked their drivers and put them in the instr.lib folder, then I put the TH3800.dll included in C:\VXIpnp\WinNT\bin according to the guidelines. I am using the Student Edition of LabVIEW 2010 with SP1, and every time I load a VI library, I get an error message that says:

  Error loading "TH3800.dll".
  Invalid access to memory location.

  I have no idea what the problem is exactly and not sure what to do to fix it. Any suggestion would be appreciated.

  Thank you

  Simon

  I'm not positive, but it seems that is the drivers you have are corrupt, do not exist or are locked in memory somehow. It would certainly be a question that you don't want to appear with Thermotron, because they will have more details on their dll. I tried Googling on the subject and the name of the dll that is self open surprisingly little information. Certainly something to talk about them!

• When closing Firefox 13.01 I always get this pop-up: Exception EAccessViolation in module ntdll.dll to 000222 B 2. Access violation at address 77BF22B2 in module

  When closing Firefox 13.01 I always get this popup:
  Exception EAccessViolation in module ntdll.dll to 000222B 2. Access violation at address 77BF22B2 in module 'ntdll.dll '. Writing of
  address 00000008.
  With previous versions of FF it never happened.
  Any solution?

  Hello

  Please check if this happens in a new profile. If the new profile is correct, you can then reset Firefox on the old (previous) profile via the help (Alt + H) > troubleshooting information.

• How to fix and debug an error of access violation.

  Hello

  I'm stuck with an access violation error that requires my exe to stop construction. I tried also to the development environment, but it's the same here. The error occurs after 5-60 minutes.

  I played a bit with the disabling of a portion of the program where it was possible and I think that I am now able to accuse the vi 'gastimer.vi '. But since this vi leads through the measurement procedure, there are some commands coming out which I was not able to map one to one.

  My question is: what are the causes access violation errors? I have no call from dll, no third-party library, the communication of material is made series of COM ports. The principle of the architecture is something adapted from producer to consumer loop, except that I often have more than one consumer, so I called them like loop controller - multiple tasks. Communication within this loop (tasks) are by cluster queue enumerator with a Variant.

  Indictments vi 'gastimer.vi' is passed an older and simpler architecture. This vi works with the structure of sequence and a large number of local variables.

  Since I test the sensors on their reaction to the concentration of gas I have 10 agrees to which I am listening at the same time.

  What styles or architecture are subject to access violations? Where can they go? where should I look more carefully in the code?

  How can I use the desktop execution trace toolkit for more information on the cause of access violation?

  Attached are two different lvlog, but I guess having the same source of error. In the second lvlog are two named vi. What do have to do with the access violation error? Can what information I get these files lvlog?

  Last attachment shows a fatal runtime error that happens quite a bit frequently in the recent time when working with this project. Could there be a connection, probably a vi crashed, typedef or something else?

  Thanks for any help

  U. Siegenthaler

  I solved the problem. The accident moved no more.

  I found a bug in my queue reference interview. I have a record where can I register reference queue and remove them again of this register. The bug was that under certain conditions, I deleted the reference of the bad queue from the registry. This bug had to the fact that there was a reference to queue in the registry that should have been removed. The application now tried to place an element in this Ref queue where, at the same time elsewhere in the application process tried to release this reference to queue. Apparently, if these two events occure at the same time, or when a synchronization that gives an access violation crash.

  My suggestion for all of you with an access violation crash: take a look at your reference to queue maintaince and check if you publish queues at the same time you're items from the queue.

  Best regards and thanks for the help

  URS

• What access violation at address 63805B3A in module mshtml.dll

  I am trying to use my toolbar to make lines and columns in a program called Scribe... It keeps this address 63805B3A Access Violation in module 'mshtml.dll.  Reading the speech D 002 0030.  Then this message appears a bunch of times and will not let me type anything after that.

  Hi Melisa,.

  What browser do you use to visit Web sites?

  Mshtml.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the error mshtml.dll is a key piece of information that will be useful while solving the problem.

  Mshtml.dll errors are caused by situations that lead to the removal or corruption of the mshtml DLL (Dynamic Link Library) file.

  In some cases, the mshtml.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

  Method 1: Reinstall the program (scribe) and check if it solves the problem.

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Answer please if you have any questions.

• Access invalid memory location during export for iOS error

  I was recently asked to convert an application for us flash on the iPad. When I try to publish the .ipa file, I get the following error:

  Access invalid memory location 0xceip = 0x55492db4

  I have no idea what could cause this and my google search of the error message came pretty empty. If I delete the document class and republish it works fine so I know it has something to do with my code but I don't have a clue where to start looking so I was hoping that someone else had a similar error and could point me in the right direction.

  Thank you very much

  -Ryan

  I was able to understand it through check and guess laborious. Just thought I'd share the bug in case someone else ever runs into it.

  A library third party I was using says try bad catch statements:

  try {}

  catch (Error :*){

  }

  No idea why the original author did it, probably never intended to write "error: *" and release shift fast enough after the "(" mais comme vous pourriez le soupçonne "Erreur" est un nom d'objet réservé à ne peut être déclaré en tant que paramètre variable) "

  When replaced by:

  try {}

  catch (error: Error) {}

  }

  the memory access bug went away. What is strange, is that the incorrect try/catch statement works fine when published in format swf, air or android and is only a problem with the converter of iOS and of course produced a very cryptic error.

  I used CS5.5 so maybe that this problem has been corrected (if not, I would say making it a compile error), but just thought I would post my findings.

• HP w2338h: invalid access to memory location

  I have a problem when I try to add Legacy hardware that were errors and says "invalid access to memory location" everyone here knows the solution?

  Hi@Back2Basic,

  Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems

  .

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Error in the operating system while adding equipment. Is this fair?

  I want to help you.

  I ask that you try to do the steps from the link below and check if it works.

  http://HP.care/2e8sE2u

  It will be useful.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Skype has stopped working! Access violation

  I get this error whenever I try to start Skype: Access violation at address 6A0CC01F in module 'mshtml.dll. Read of address 06DAB589.

  What can I do?

  Thank you!

  I'm sorry, but 'forward' is not 'now '.

  Update your installation of Windows 7 SP1 last.

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-7-Service-Pack-1

  Install the version of Internet Explorer IE9:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-9-worldwide-languages

• Access violation 0019DE4C

  So my Skype has stopped working suddenly and said that I had an access violation

  I'm on Windows 10 and Skype version 7.18.0.112

• CVI executable causes an on update of Windows 10 anniversary 0xC0000005 Access Violation.

  Created executables always causes an Access Violation (0xc0000005 exception) to the closing period on Windows 10 RS1 (update of the anniversary).

  This problem occurs in LabWindows CVI 2015 and 2015 SP1.

  How to reproduce: simple program to create and compile with the (x 86) release profile by default.

  for example:

  #include "test.h".
  
  
  
  
  int ph;
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
  
  					   LPSTR lpszCmdLine, int nCmdShow)
  
  {
  
  	If (InitCVIRTE (hInstance, 0, 0) == 0)
  
  		Returns - 1;    / * memory * /.
  pH = LoadPanel (0, "test.uir", group of EXPERTS);
  
  	DisplayPanel (ph);
  
  	RunUserInterface();
  return 0;
  
  }
  int CVICALLBACK CallExit (int, int int event, control panel,
  
  						  void * callbackData, int eventData1, int eventData2)
  
  {
  
  	switch (event)
  
  	{
  
  		case EVENT_COMMIT:
  
  			QuitUserInterface (0);
  
  		break;
  
  	}
  
  	return 0;
  
  }

  The problem is visible on the control panel > reliability history > Error Reporting:

  

  Also the code of the executable file (exit code) is always 0xc0000005 instead of zero.

  To check out more easily code can be called the executable through file .bat:

  off @echo
  
  Test.exe
  
  echo ExitCode = %ERRORLEVEL%
  
  pause

  I have observed that if multiple instances of the same program are running, only block when the last instance is closed. It seems that the problem occurs at the time that the CVI runtime is released from the ram. (The latter is only a guess)

  Hello

  We did some research and saw that the failure is related to some police files in

  c:\Windows\SysWOW64\cvirte\fonts

  c:\Windows\System32\cvirte\fonts

  Could you try deleting these files and see if the heater is always performed. If this isn't the case, it would be a work around if you do not use these fonts.

  We continue the investigation to see the exact cause

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• NI MAX with USB devices access violation

  I found a lot of messages about access violation, but most of them are about LabView and not MAX OR, as is the case here.

  I get an access violation error (0xC0000005 at PPC = 0x106399AE) whenever I try to create a new task of MAX OR by selecting a USB DAQ device. I tried with USB-6009 and USB-6211, same problem. The device is properly recognized (test) but when I try to create a new task I complete all the procedure, and when cliquerai I finish I get the error. This also causes LabView programs that use the tasks of MAX OR crashing.

  First of all, this happened after the NI DAQmx drivers update to a new version, but then I recognized that this version was incompatible with Labview installed on this machine (8.6). I tried to fall back by using a restore point in windows and reinstall the 9.5.1 DAQmx drivers (the latest drivers supported by the version of LabView.

  I tried to 'Reset Configuration data' MAX OR (under the Tools menu) without success. The WindowsXPUSBhotfix is also installed in the system. Any help?

  I also sent a support NC ticket: c82f5b4f-d774-40a2-8341-4dbeee9df876

  Specifications of the PC:

  Windows XP SP3

  LabVIEW 8.6

  NOR-DAQmx 9.5.1

  The error was eventually resolved by uninstalling OR MAX and LabView and then reinstall all the software needed. In particular, the configuration that worked was:

  -NI MAX 5.1 (includes NOT-DAQmx 9.5.1)

  -LabView 8.6

  -2.6 OR-488. 2 (including NI-VISA 4.4.1)

  the last of them was necessary to connect to another device to purchase. With the above configuration, the wizard DAQ worked and generated a task, but when the program was launched, the task was not able to recognize the good device (unit name is an empty string). So I converted it to a NOR-DAQmx task, and now it works. (Don't really know if this quick passage would have been a good work around from the beginning.)

• Invalid access to memory location

  Dear all

  good your time

  I convert a labview 5.1.1 to 2008 (by convert forum) program and run it. before that, I install this 'http://www.keithley.com/support/keidoc_searchresult?keyword=2400&item_type=Software+Driver'.

  I was faced with this error: "error loading: file\ke24xx.dll directory invalid access to memory location".

  I do not install the other driver. because when I run this need VI (subsequently I have attached) to pnp driver (file ke24xx.dll confined) no other drivers especially those news similar to "http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...". I want to just run the VI. my friends are running this with labview VI 2007 and pilot pnp.

  I don't know if there is the error due to the conversion of the VI or I need to install labview 2007.

  Please guide me! God gives you the right thing.

  Best regards

  Since you have yet to provide the dll and you do not have the dll or little matter what you say, I suggest that you ask on the subject of whether you got the code and DLLs of.

  Did you answer why don't you try the driver OR.