Error "Library not registered" and "access violation at address 00000000. Read of address 00000000 "while trying to play Call of Duty 2 on Windows 7 64 bit
Original title: Call of Duty 2 on windows 7: first window said: library not registered. After a minute, seven or more pop-up windows to say the same thing: access violation at address 00000000. Read of address 00000000
I have thought about it myself, do what I tried above and activate the function of compatibility with Windows Vista service pack 2. If you do not know the fix vista, click Start, Control Panel, hardware and sound, click sound, and then click the recording TAB. Right click on a space in the tab itself, when see her disable devices is displayed click on to show them. stereo mix is show in the tab, right click on that and turn on. Only, remember, insert the CD, do not autorun installation just right click on the icon setup on the CD itself and open a new window. run as administrator and install. After that, go ahead and install the latest version of Patch 1.3 for Call of Duty 2. When all is said and done don't forget to change the compatibility mode to Windows Vista service Pack 2. Note to Microsoft: Windows XP mode is a great idea, except that you dropped the ball twice, #1 - should have a version of it to support windows 7 Edition home premium for topics such as this for the public #2 - you must enable a way to get the video settings within the windows XP mode , in short to make a windows operating system that will play a game out there that has already been done to PC.
Tags: Windows
Similar Questions
-
Getting APPCRASH KERNEL32. DLL error while trying to play Call of Duty Black Ops 2 for vista
I had the 1st drive of game to work & when I arrived on the 2nd disc I get application not found, but it continues, but when I try to start the game I get a black screen where I can see my mouse move I tap Ctrl + alt + delete to terminate the program and get a message, the program collapsed unexpecetedly , so I check the event viewer and see an error in the application when I watched the game the message is
fulting application t6sp.exe, version 1.0.0.1, time stamp 0x509a7621, failed module t6sp.exe, version 1.0.0.1, time stamp 0x509a7621, exception code 0 x 0000005, 0x0025aa2d, 0xcf8 process id offset, start time of application 0x01cdc6d2d24f269a.
the imformation is
type of fault bucket 3251435669 1
name of the event APPCRASH
response no
cabin ID: 0
signature of the problem
P1: t6sp.exe
P2: 1.0.0.1
P3: 509a 7621
P4: t6sp.exe
P5: 1.0.0.1
P6: 509a 7621
P7: c0000005
P8: 0025aa2d
P9:
P10:
attached files
C:\users\jon\appdata\local\temp\werfcc1. Temp.version.txt
I ran guest he says he fixed the problems, but I tried to run the game & same problem
I have not changed anything
Help, please
Hello
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
. What is the brand and model of the computer?
Please follow the steps in the link below and check off the question:
Game hangs or quits unexpectedly:Note: This article also applies to non-Microsoft games.Important note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
If the problem persists, I suggest you contact the game provider to get help from the link below:
http://support.Activision.com/pkb_Home?clickedOn=MW3
I hope that the information above helps you.
-
original title: library not registered
When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".
------
-
I asked a bunch of people and they said to update. It saids
Getting Direct3D 9 interface...
Pixel shader version is 2.0
Vertex shader version is 0.0
Video card or driver does not accelerate the transformation and lighting.
Video card or driver doesn't support UBYTE4N vertex data.Error during initialization:
Video card or driver doesn't support UBYTE4N vertex data.Hi Jbrown_98,
You can download and install the latest chipset and graphics drivers for Windows Vista and check if this solves the problem.
Here is the link to the Intel Web site to download the drivers:
http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng
See the links below for more details on the update of drivers:
Updated a hardware driver that is not working properly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
Let us know if it helps.
-
Satellite L300 - can't play Call of Duty 2 - DirectX error
Hello
I'm having a problem with my L300.
This is under windows XP with all the drivers and there is no problem with some games, but when I try to play Call of Duty 2, I get an error that I can't fix.I would ask for your help cause this computer is new and the game takes place on my old pc with no problem.
But why I can't run it on my new pc.There is a screen of the error below.
I tried the DirectX attached to the game and DirectX 10, but nothing.
I don't know what to do please help me.http://img20.imageshack.us/img20/6890/47536882.PNG
Post edited by: bogo_iliev
Hello
Start the DirectX using the command * dxdiag *.
There, you should check if all acceleration graphics card options have been enabled.If that does not help, then you should try to update the graphics driver.
In most cases, the old graphics driver causes these questions because it s not completely compatible with the game.Check it out!
-
Trying to activate sharing protected by password in the network and sharing window I get the error message "library not registered. Also, in media player, I get always an error of sharing multimedia. I think that the 2 mmight be bound. PLEASE HELP ME!
Hi Dj,
When he the accur first question?
Have you tried a system restore to a point before the question accurred?
You can follow the procedure as described below:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow steps 7 to place the computer in his usual when you finished the clean boot troubleshootingDo the system restore to a date preceding the accurred question according to the link below:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreReply back with more information for you to help
Kind regards
Kiki
-
Line 43
Char 12
Library not registered error
Code 0
File URL: //C:users/Denise/appdate/local/tmp/low%7B1BB22D38-A411-4B13A746-C2A4F4E7344%7D/MTWBtoolvar.htmlHello
1. when exactly you get this error message?
2. using Internet Explorer or another browser?
By the error message, this confirms that the toolbar MTWB is defective or damaged. This also occurs if the malware is running on the computer.
First try to uninstall this tool. To uninstall the toolbar, try the following steps.
1. Click Start, type appwiz.cpl and press to enter.
2. in the list change or remove programs, click Web or search toolbar to delete.
3. click on uninstall.
4. follow the on-screen instructions to uninstall and complete uninstallation of the toolbar.
To run an analysis online on the computer, visit the following link:
http://OneCare.live.com/site/en-us/default.htm
Post back with the results, so that we can help you further.
Kind regards
Syed
Answers from Microsoft supports the engineer. -
Installation of Quake 4 on Windows 7... "" Library not registered ".
I tried to install Quake 4 on my Windows 7 computer, and a message saying "Library not registered" keeps popping up. I searched for solutions to other websites and it just said I should right click and press "Run as Administrator". I can't find this option. I think it is because the user account is the administrator. If someone could help me find a solution, it would be much appreciated.
Ah, I looked on this. That's what I get for trying to answer so late.
You are installing from a CD or a place digitally? If you are installing from a CD, you must open "Computer" and right-click on the CD and click on explore or open and find the installer on the CD. You do a right click on the Setup file and run that as administrator.
-Kyle sleepy
-
loaded call of duty 2, but will not be executed, the library not registered
I was able to actually load the game (I can see it in programs), but when I try to execute a notice appears saying there are compatibility problems. (I ran the program under xp3 compatibility, vista2 etc..) I touched the program anyway and "library not registered" comes back every time. Very frustrating.
This solves a problem I've been working on for months. I have never messed with 10 windows experience - has been a long pain without any benefit. It DOES nothing again - except mess up COD 2.
Thanks again. Uninstall KB3086255, run as COD 2 Windows 7 admin and you're ready to go.
-
Chrome error: "class not registered".
I changed my default browser Chrome to IE then back to Chrome and since then have been do this error "class not registered". I have uninstalled/installed and the same error persists. Any help is very appreciated. Thank you!
Unfortunately, Keith suggestion has not worked for me either.
What ended up working for me are the following steps:
1 hit CTRL + R and type "misconfig".
2. on the Startup tab, click on "Open the Task Manager.
3. When this window is open, right click on Google Chrome
4. click on Properties, then open the compatibility tab
5. press on "run the resolution of compatibility issues.
From this point, Windows should resume, searching for issues. It should detect and difficulty and go directly to the application allows you to test whether the program works.
After that I did it, it worked for me. If all goes well, it does the same thing for you!
-
Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048
Original title messages: error
Can you please help me fix this annoying message. I get several guests for her, and I don't know why.
Access violation at address 74F735D1 in module "OLEACC.dll". Read of address 00000048
Hi Travis815,
(1) when exactly you get this error message?
(2) since when are you facing this problem?
(3) remember you to make changes to the computer?
Please quote the complete error message you receive.
Method 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
When you install Acrobat Pro, I get these errors:
EAccess violation in module AcrobatPro_11_Web_WWMUI.exe at 0001B7D6
access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe read access 00000008
The program will not work.
Help?
Looks like you have a corrupt file and need to download again. Also great download, it is not surprising that an error occurs.
-
"Access violation at address 20202000. Read of address 20202000. »
Original title: Access violation at address...
I use a program called TPEditor, and every time that I try to compile the software it gives the error "access to the 20202000 address violation. Read of address 20202000. "The numbers vary according to the different types of software in the access violation error. It crashes the program and I have to go into the Task Manager and end task. I have Windows 7 and it's a new HP laptop so I don't think that there is a virus problem. Any ideas would be greatly appreciated...
Hello
Thank you for your response.
I suggest you to uninstall and reinstall the software TDEditor and check.
Uninstall or change a program:
http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
I just bought the DC Pro Acrobat full of desktop software only. Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please? Thank you!
Hi Rob,
What is happening in Mode safe? If you can install it in Mode safe mode then delete all entries in startup via msconfig as this could conflict with the program.
If this does not work, saving all the data of your administrator account, you can delete the account and recreate it.
Kind regards
Rave
-
Original title: can not play Age Of Empires 3 on Windows 7 64 bit
I recently downloaded aoe 3 games for windows program, see the list also useful with Windows 7.
Download fine, as does the installation but I have a very big problem all I get when I try and run all the extensions of aoe 3 is the following error
c:\windows\system32\d3dx9_25.dll is not designed to run on Windows or it contains an error. try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
The file in question is there I tried to delete it using the program dxwebsetup or one that comes with the download aoe3 however both reinstall the same file accurate return.
I have try the .exe running in all sorts of compatibility mode as well as manually from the install in compatibility mode. all I get is the same error each time. I ran the esfile auditor and lists some invalid files, I guess it's because they are cracked to work without the cd files. I downloaded the game 3 times now.
My drivers are all upward to date, research on the internet I can't find a lot of information, a lot of links goto the forums on agecommunity.com but they are no longer works.
I am really stuck and would appreciate any help thanks
Hi Mitsouki,
This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.
Step 1: You can follow the steps mentioned in the article below, which deals with a similar question
Game error: "the file d3dx9_xx. DLL is not found.
http://support.Microsoft.com/kb/910813
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I've recently updated to the new ITunes and now I can't find my devices to change the content. What I do have I missed something?
-
I have a Mac OSX 10.4.11. I installed the new update of Firefox and when I tried to open it, he said that it was not compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox -
-
Tecra A7 with W7-64 b uses only 3 GB to 4 GB of RAM available
Recently, I upgraded my Tecra A7-243 with XP 32 b of 2 GB to 4 GB of ram.XP 4 GB has recognized and used as expected only 3 GB of RAM.Now, I have installed Windows 7-64 b (full installation with format system partition).But W7 reports still installed
-
HP Pavilion g6 - 2288ca - Wireless internet continually fall
Hello Approximately nine to ten months of passes, I bought a laptop HP Pavilion g6 - 2288ca, C2N59UAR product number, Windows 8. Recently I had questions where wireless internet will fall without warning. I have already established that the problem i
-
G6-2030SL: replacement power connector
Hello worldMy problem is that my PC (G6-2030SL) does not load, but my charger works on my old Presario CQ60-103EL.I checked the number of spare parts for two power connectors, and they are different.Can I replace my with presario power connector? EDI