Library palette is completely empty

Similar Questions

• My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

  My FCPX 10.2 does not recognize my Lexar 512 ssd drive,
  who is formatted for Mac Os journaled and completely empty (already formatted),
  He comes to see my ssd as an SD card once I click an import media.

  I had once FCPX 10.0.8 and with which I was able to edit with my external Lexar 512 GB SSD drive,
  that was seen as a normal external hard drive with all my projects and events.

  I'm not using Time Machine, never used.

  Any thoughts, why can't you do more?

  Here is a screen from my drive information: http://i.imgur.com/3TrITKf.png.
  and here is a screen in FCPX where he sees my ssd as external device: http://i.imgur.com/PB4dgkB.png

  Thank you
  Federico

  SO it is not working properly. The drive is empty. Make a new library and save it on the SSD drive.

• Folder of documents completely empty after emptying the Recycle Bin. Running Windows Vista Edition Home Premium.

  I uploaded several photos from a third party site yesterday. In this process, I make several files which I then recycle once the download is complete. Because I'm uploading about 6 months worth of photos, I decided it would be best to empty the trash when I finished and did. Today, I went to access a Word document, and ALL my files are missing from the Documents folder - it is completely empty. When I try to look for one of the files that I know was in the file, I get a message that says "the point _ that this shortcut refers has been changed or moved, and this shortcut no longer works correctly. You really want to remove this shortcut? "In the research forums, I've seen where this can happen after a trojan/virus. I met said before virus on my laptop, so I know what it looks like at and. I have experienced this on my desk that I currently have the problem with. I ran a full scan, just to be on the right side and found nothing. Any suggestions?

  He should not have deleted the documents folder.  System restore must have worked.

  Protection system had to be turned on in order to 'restore' .  Directions to do are in the link I listed above about the subject.

  Have you tried to uninstall the software with that allows you to export documents?  See if the documents are restored on uninstall.

  In the settings of your third-party software that you see a setting that says keep copy file on the drive even after deleting? If so, you have a copy of the file on the raw disk. See this

  Display of the RAW files from many cameras free Microsoft Camera Codec Pack

  http://www.PCWorld.com/article/237831/view_raw_files_from_many_cameras_with_free_microsoft_camera_codec_pack.html

  How to recover files from a RAW drive - there are 3 links to resource for recovery at the bottom of page software.

  http://www.ehow.com/how_7438122_retrieve-files-raw-drive.html

  Understanding: You exported files in the folder on the desktop.  These files would not be in the Documents.  Fix?

  Yet, after downloading the files and delete the photos in the folder have been exported to, everything has disappeared had not been exported.  Fix?

  Go to C:\Users\Gina, right-click the Documents folder, then choose ' include in library: Documents ". Do the same for the public folder.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/documents-folder-missing-from-libraries/3cce3119-29dd-4C4B-af87-c12abc2ef45e

  Restore files which are deleted from the Recycle Bin

  http://www3.TELUS.NET/mikebike/restoration.html

  Undelete software has been exaggerated as reliable.

  http://undelete-all.com/related/English/documents/?f=related

  Freeware data recovery software

  http://www.dtidata.com/free_data_recovery_software/

  How to recover a Microsoft Word document depends on how the document was lost in the first place. If the document exists but is damaged or cannot be opened in Microsoft Word, then you need to fix it. If it has been lost or deleted then you need to get it back.

  Recommended software

  • If the document exists but is damaged or will not open, try WordFIX.
  • If the document is lost or deleted, try Word Recovery.

  http://www.Tech-Pro.NET/how-to-Word-document-recovery.html

• CC desktop application is completely empty!

  Hey all,.

  It's ruining my head at the moment, I'm working at home at present and a link to the files in the office is a complete pain.

  I have uninstalled the application, re-installed, changed the file opm.db in opm_old.db, as noted elsewhere in the forums, restart the mac, and yet, I get this...

  

  Completely empty!

  My mac is a mid-2008 24 "with the latest OS (El Capitan) and everything works as it should and I have a lot of design/photography is installed. Someone has an idea of what to do here? It's very frustrating.

  As you can see there is no icon for signing in and out, absolutely nothing here. I'd appreciate some help if anyone knows why this is. Thank you.

  Luke.

  Hello

  No base:

  Force quit Adobe all processes as creative cloud, CoreSync, AAMUpdater related... activity monitor.

  (1) right click on the Finder icon and select 'Go - To Folder' option.

  (2) you will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, run Adobe Creative Cloud application and check.

  Always the same?

  Try with the steps mentioned in the link below:

  White cloud screen on mac creative

• MAC OS 10.8.4 - CC desktop application is completely empty.

  My desktop CC app is completely empty. What to do. (I reinstalled) already. MAC OS 10.8.4

  Go to ~/Library/Application Support/Adobe/OOBE/opm.db and trash. Launch desktop and sign in. ( http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html) CC.

• My Library palette doesn't let me draw lines...

  I have created a form of 'work' and add lines to a page. I can't, however, change the original document.

  In my library palette, the option is grayed out. Could someone tell me why it is grayed out and how to make available so I can complete my form?

  Thank you very much in advance!

  Because it is work we must return to the original program from the work and he Add.

  Work will only allow you to add the field of objects on top of the work... it only allows you to change the plate of the boiler (the work).

  Paul

• New tab page is completely empty.

  I had to reset my firefox this morning, because something has installed Snap.do, and now whenever I click on the new tab button, it is completely empty. There is no icon ' Show/hide', and there is no pinned sites. It is all white and white. I use the new tab page to go to Web sites that I use often, and it's annoying that it's not there. I've tried everything I've found so far, and nothing has worked. Anyone know what to do?

  You can check the value of the browser.newtab.url pref on the topic: config page to ensure that it is always set to: newtab.

  • http://KB.mozillazine.org/about:config

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• 40PB200 LED TV - after a few minutes of video is completely empty

  Hello

  I bought a TV from E - Max Sharjah, UAEi on Dec.2012 and it was almost a year and 7 months not used.
  Now we have installed the TV yesterday it was working fine until today (03.08.2014). Now the problem is that the video is completely empty after a few minutes once he the but audio still works.
  Please let us know the problem.
  Your quick response would be much appreciated

  My mail is [email protected]

  See you soon
  MK

  Hi mery

  Televisions are produced without a possibility to solve these problems alone. With the help of computers, it is possible to do something but on TV, it is quite limited. All you can do is to check the settings or install the latest firmware. No more than that.
  All this is described in the document s user manuals.

  I can't say for sure, but there must be a technical problem (hardware) and you need professional help. Warranty is still valid?

• The measurement and Automation Explorer is completely empty. No idea why?

  Hello

  When I open Measurement & Automation Explorer, there is nothing in the main boxes, boxes are completely empty. The top toolbar with file/Edit/tools is there, but all that is empty.

  I had good success with the SCXI-1000 chassis in a few years when I did further research at another University. At my new University, it gave me access to an SCXI-1000 chassis with an SCXI-1600 module to connect to the computer via USB. I reinstalled windows on an old computer to 64-bit, had the hand of the entire system, the Measurment and Autiomation Explorer open as expected, then was that NEITHER ceased support for the SCXI-1600 on a Win 7 Pro 64-bit modules. So, I've divided the hard drive into two partitions, installed Win 7 Pro 32 bit and reinstalled NOR then installed the updates for a few hours.

  When I try to turn on measurement and Automation Explorer, there is nothing in the window. What can I do to get the various boxes? I went to tools > reset Configuration data.

  

  Nicholas,

  I recently saw a similar problem on another post. This person has received the exact same blank screen because Windows Firewall has blocked MAX (nimax.exe). Try turning off your firewall temporarily and then see if MAX runs. If so, you will need to add an exception in your firewall settings. If this isn't the case, you could have operated in a corrupted installation and the need to do a repair.

  Ryan

• . I downloaded 3 games and my C drive is full already and my D drive is completely empty. Need help

  Hey guys, I just bought an Acer Predator G3-605 today. I downloaded 3 games and my C drive is full already and my D drive is completely empty. I need your help. Thank you

  you need to download and install your games on D: instead of C:

  What do you use to download the games?

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Windows Live Mail Desktop has received an email that appears to be completely empty.

  original title: text not visible

  I use Windows Live Mail Desktop (Version 2011 15.4.3508.1109 Build)

  I received an email that appears to be completely empty - not at all in the body of text.

  When I hit the reply, the text becomes visible in the answer, but still not visible if I open the mail.

  Hi PeterSlavid,

   

  For more specialist on this question help, post your query on the Windows Live Forum.

  Windows Live - Forum http://windowslivehelp.com/

   

• Desktop app from creative cloud completely empty

  Hello, when I run my desktop creative cloud application window is completely empty. I want to update lightrrom and photoshop. My Adobe Id is too ok and my internet connection. Thanks a lot for your help

  White screen

  https://forums.Adobe.com/thread/1249756

  Sign-in black screen | Creative cloud desktop application

  https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html

  https://forums.Adobe.com/thread/1970202

• The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty?

  The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty? How can I access the apps?

  The solution seems simpler than city above: reinstall the creative Cloud application. When he finally set in the Finder (Mac) you ' he's opinion - down under - that "synchronize file is paused. Click on the small triangle on the right and the problem is solved - or it was for me.

  Concerning